diff options
Diffstat (limited to 'dts/src/arm/imx6ul.dtsi')
| -rw-r--r-- | dts/src/arm/imx6ul.dtsi | 707 |
1 files changed, 707 insertions, 0 deletions
diff --git a/dts/src/arm/imx6ul.dtsi b/dts/src/arm/imx6ul.dtsi new file mode 100644 index 0000000000..09edbedfd9 --- /dev/null +++ b/dts/src/arm/imx6ul.dtsi @@ -0,0 +1,707 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/imx6ul-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6ul-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + ethernet0 = &fec1; + ethernet1 = &fec2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clock-latency = <61036>; /* two CLK32 periods */ + operating-points = < + /* kHz uV */ + 528000 1250000 + 396000 1150000 + 198000 1150000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 528000 1250000 + 396000 1150000 + 198000 1150000 + >; + clocks = <&clks IMX6UL_CLK_ARM>, + <&clks IMX6UL_CLK_PLL2_BUS>, + <&clks IMX6UL_CLK_PLL2_PFD2>, + <&clks IMX6UL_CA7_SECONDARY_SEL>, + <&clks IMX6UL_CLK_STEP>, + <&clks IMX6UL_CLK_PLL1_SW>, + <&clks IMX6UL_CLK_PLL1_SYS>, + <&clks IMX6UL_PLL1_BYPASS>, + <&clks IMX6UL_CLK_PLL1>, + <&clks IMX6UL_PLL1_BYPASS_SRC>, + <&clks IMX6UL_CLK_OSC>; + clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", + "secondary_sel", "step", "pll1_sw", + "pll1_sys", "pll1_bypass", "pll1", + "pll1_bypass_src", "osc"; + arm-supply = <®_arm>; + soc-supply = <®_soc>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a02000 0x1000>, + <0x00a04000 0x2000>, + <0x00a06000 0x2000>; + }; + + ckil: clock-cli { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ECSPI1>, + <&clks IMX6UL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ECSPI2>, + <&clks IMX6UL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ECSPI3>, + <&clks IMX6UL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ECSPI4>, + <&clks IMX6UL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart7: serial@02018000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02018000 0x4000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART7_IPG>, + <&clks IMX6UL_CLK_UART7_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART1_IPG>, + <&clks IMX6UL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart8: serial@02024000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART8_IPG>, + <&clks IMX6UL_CLK_UART8_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + gpt1: gpt@02098000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPT1_BUS>, + <&clks IMX6UL_CLK_GPT1_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + fec2: ethernet@020b4000 { + compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x020b4000 0x4000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clks IMX6UL_CLK_ENET2_REF_125M>, + <&clks IMX6UL_CLK_ENET2_REF_125M>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<1>; + fsl,num-rx-queues=<1>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_WDOG1>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6ul-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + + reg_3p0: regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USBPHY2>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6ul-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6ul-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6ul-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + gpt2: gpt@020e8000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; + reg = <0x020e8000 0x4000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + }; + + pwm5: pwm@020f0000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f0000 0x4000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm6: pwm@020f4000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f4000 0x4000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm7: pwm@020f8000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f8000 0x4000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm8: pwm@020fc000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020fc000 0x4000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + fec1: ethernet@02188000 { + compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clks IMX6UL_CLK_ENET_REF>, + <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<1>; + fsl,num-rx-queues=<1>; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_I2C3>; + status = "disabled"; + }; + + qspi: qspi@021e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; + reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_QSPI>, + <&clks IMX6UL_CLK_QSPI>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021e8000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART2_IPG>, + <&clks IMX6UL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021ec000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART3_IPG>, + <&clks IMX6UL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021f0000 0x4000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART4_IPG>, + <&clks IMX6UL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021f4000 0x4000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART5_IPG>, + <&clks IMX6UL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_I2C4>; + status = "disabled"; + }; + + uart6: serial@021fc000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021fc000 0x4000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART6_IPG>, + <&clks IMX6UL_CLK_UART6_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; |