diff options
Diffstat (limited to 'dts/src/arm/kirkwood.dtsi')
-rw-r--r-- | dts/src/arm/kirkwood.dtsi | 394 |
1 files changed, 0 insertions, 394 deletions
diff --git a/dts/src/arm/kirkwood.dtsi b/dts/src/arm/kirkwood.dtsi deleted file mode 100644 index 2161e23bd9..0000000000 --- a/dts/src/arm/kirkwood.dtsi +++ /dev/null @@ -1,394 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> - -#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "marvell,kirkwood"; - interrupt-parent = <&intc>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "marvell,feroceon"; - reg = <0>; - clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; - clock-names = "cpu_clk", "ddrclk", "powersave"; - }; - }; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - i2c0 = &i2c0; - }; - - mbus@f1000000 { - compatible = "marvell,kirkwood-mbus", "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - /* If a board file needs to change this ranges it must replace it completely */ - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */ - MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */ - MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */ - >; - controller = <&mbusc>; - pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ - pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - - nand: nand@12f { - #address-cells = <1>; - #size-cells = <1>; - cle = <0>; - ale = <1>; - bank-width = <1>; - compatible = "marvell,orion-nand"; - reg = <MBUS_ID(0x01, 0x2f) 0 0x400>; - chip-delay = <25>; - /* set partition map and/or chip-delay in board dts */ - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "disabled"; - }; - - crypto_sram: sa-sram@301 { - compatible = "mmio-sram"; - reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>; - clocks = <&gate_clk 17>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - ocp@f1000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x0100000>; - #address-cells = <1>; - #size-cells = <1>; - - pinctrl: pin-controller@10000 { - /* set compatible property in SoC file */ - reg = <0x10000 0x20>; - - pmx_ge1: pmx-ge1 { - marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", - "mpp24", "mpp25", "mpp26", "mpp27", - "mpp30", "mpp31", "mpp32", "mpp33"; - marvell,function = "ge1"; - }; - - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", "mpp19"; - marvell,function = "nand"; - }; - - /* - * Default SPI0 pinctrl setting with CSn on mpp0, - * overwrite marvell,pins on board level if required. - */ - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - - /* - * Default UART pinctrl setting without RTS/CTS, - * overwrite marvell,pins on board level if required. - */ - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; - }; - - core_clk: core-clocks@10030 { - compatible = "marvell,kirkwood-core-clock"; - reg = <0x10030 0x4>; - #clock-cells = <1>; - }; - - spi0: spi@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <23>; - reg = <0x10600 0x28>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; - status = "disabled"; - }; - - gpio0: gpio@10100 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10100 0x40>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <35>, <36>, <37>, <38>; - clocks = <&gate_clk 7>; - }; - - gpio1: gpio@10140 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10140 0x40>; - ngpios = <18>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <39>, <40>, <41>; - clocks = <&gate_clk 7>; - }; - - i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <29>; - clock-frequency = <100000>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - uart0: serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <33>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - uart1: serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <34>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; - status = "disabled"; - }; - - mbusc: mbus-controller@20000 { - compatible = "marvell,mbus-controller"; - reg = <0x20000 0x80>, <0x1500 0x20>; - }; - - sysc: system-controller@20000 { - compatible = "marvell,orion-system-controller"; - reg = <0x20000 0x120>; - }; - - bridge_intc: bridge-interrupt-ctrl@20110 { - compatible = "marvell,orion-bridge-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20110 0x8>; - interrupts = <1>; - marvell,#interrupts = <6>; - }; - - gate_clk: clock-gating-control@2011c { - compatible = "marvell,kirkwood-gating-clock"; - reg = <0x2011c 0x4>; - clocks = <&core_clk 0>; - #clock-cells = <1>; - }; - - l2: l2-cache@20128 { - compatible = "marvell,kirkwood-cache"; - reg = <0x20128 0x4>; - }; - - intc: main-interrupt-ctrl@20200 { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20200 0x10>, <0x20210 0x10>; - }; - - timer: timer@20300 { - compatible = "marvell,orion-timer"; - reg = <0x20300 0x20>; - interrupt-parent = <&bridge_intc>; - interrupts = <1>, <2>; - clocks = <&core_clk 0>; - }; - - wdt: watchdog-timer@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>, <0x20108 0x4>; - interrupt-parent = <&bridge_intc>; - interrupts = <3>; - clocks = <&gate_clk 7>; - status = "okay"; - }; - - cesa: crypto@30000 { - compatible = "marvell,kirkwood-crypto"; - reg = <0x30000 0x10000>; - reg-names = "regs"; - interrupts = <22>; - clocks = <&gate_clk 17>; - marvell,crypto-srams = <&crypto_sram>; - marvell,crypto-sram-size = <0x800>; - status = "okay"; - }; - - usb0: ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <19>; - clocks = <&gate_clk 3>; - status = "okay"; - }; - - dma0: xor@60800 { - compatible = "marvell,orion-xor"; - reg = <0x60800 0x100 - 0x60A00 0x100>; - status = "okay"; - clocks = <&gate_clk 8>; - - xor00 { - interrupts = <5>; - dmacap,memcpy; - dmacap,xor; - }; - xor01 { - interrupts = <6>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; - }; - }; - - dma1: xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60B00 0x100>; - status = "okay"; - clocks = <&gate_clk 16>; - - xor00 { - interrupts = <7>; - dmacap,memcpy; - dmacap,xor; - }; - xor01 { - interrupts = <8>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; - }; - }; - - eth0: ethernet-controller@72000 { - compatible = "marvell,kirkwood-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - clocks = <&gate_clk 0>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; - - eth0port: ethernet0-port@0 { - compatible = "marvell,kirkwood-eth-port"; - reg = <0>; - interrupts = <11>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ - }; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <46>; - clocks = <&gate_clk 0>; - status = "disabled"; - - /* add phy nodes in board file */ - }; - - eth1: ethernet-controller@76000 { - compatible = "marvell,kirkwood-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76000 0x4000>; - clocks = <&gate_clk 19>; - marvell,tx-checksum-limit = <1600>; - pinctrl-0 = <&pmx_ge1>; - pinctrl-names = "default"; - status = "disabled"; - - eth1port: ethernet1-port@0 { - compatible = "marvell,kirkwood-eth-port"; - reg = <0>; - interrupts = <15>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ - }; - }; - - sata_phy0: sata-phy@82000 { - compatible = "marvell,mvebu-sata-phy"; - reg = <0x82000 0x0334>; - clocks = <&gate_clk 14>; - clock-names = "sata"; - #phy-cells = <0>; - status = "ok"; - }; - - sata_phy1: sata-phy@84000 { - compatible = "marvell,mvebu-sata-phy"; - reg = <0x84000 0x0334>; - clocks = <&gate_clk 15>; - clock-names = "sata"; - #phy-cells = <0>; - status = "ok"; - }; - - audio0: audio-controller@a0000 { - compatible = "marvell,kirkwood-audio"; - #sound-dai-cells = <0>; - reg = <0xa0000 0x2210>; - interrupts = <24>; - clocks = <&gate_clk 9>; - clock-names = "internal"; - status = "disabled"; - }; - }; -}; |