summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/meson8b-odroidc1.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/meson8b-odroidc1.dts')
-rw-r--r--dts/src/arm/meson8b-odroidc1.dts365
1 files changed, 0 insertions, 365 deletions
diff --git a/dts/src/arm/meson8b-odroidc1.dts b/dts/src/arm/meson8b-odroidc1.dts
deleted file mode 100644
index a2a47804fc..0000000000
--- a/dts/src/arm/meson8b-odroidc1.dts
+++ /dev/null
@@ -1,365 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2015 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-/dts-v1/;
-#include "meson8b.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Hardkernel ODROID-C1";
- compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
-
- aliases {
- serial0 = &uart_AO;
- mmc0 = &sd_card_slot;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- device_type = "memory";
- reg = <0x40000000 0x40000000>;
- };
-
- leds {
- compatible = "gpio-leds";
- blue {
- label = "c1:blue:alive";
- gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
- };
-
- p5v0: regulator-p5v0 {
- compatible = "regulator-fixed";
-
- regulator-name = "P5V0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- tflash_vdd: regulator-tflash_vdd {
- /*
- * signal name from schematics: TFLASH_VDD_EN
- */
- compatible = "regulator-fixed";
-
- regulator-name = "TFLASH_VDD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- vin-supply = <&vcc_3v3>;
-
- gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- tf_io: gpio-regulator-tf_io {
- compatible = "regulator-gpio";
-
- regulator-name = "TF_IO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- vin-supply = <&vcc_3v3>;
-
- /*
- * signal name from schematics: TF_3V3N_1V8_EN
- */
- gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
- gpios-states = <0>;
-
- states = <3300000 0
- 1800000 1>;
- };
-
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&saradc 8>;
- };
-
- rtc32k_xtal: rtc32k-xtal-clk {
- /* X3 in the schematics */
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "RTC32K";
- #clock-cells = <0>;
- };
-
- vcc_1v8: regulator-vcc-1v8 {
- /*
- * RICHTEK RT9179 configured for a fixed output voltage of
- * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
- * VDD1V8 according to the schematics.
- */
- compatible = "regulator-fixed";
-
- regulator-name = "VCC1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- vin-supply = <&p5v0>;
- };
-
- vcc_3v3: regulator-vcc-3v3 {
- /*
- * Monolithic Power Systems MP2161 configured for a fixed
- * output voltage of 3.3V. This supplies not only VCC3V3 but
- * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
- */
- compatible = "regulator-fixed";
-
- regulator-name = "VCC3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- vin-supply = <&p5v0>;
- };
-
- vcck: regulator-vcck {
- /* Monolithic Power Systems MP2161 */
- compatible = "pwm-regulator";
-
- regulator-name = "VCCK";
- regulator-min-microvolt = <860000>;
- regulator-max-microvolt = <1140000>;
-
- vin-supply = <&p5v0>;
-
- pwms = <&pwm_cd 0 12218 0>;
- pwm-dutycycle-range = <91 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddc_ddr: regulator-vddc-ddr {
- /*
- * Monolithic Power Systems MP2161 configured for a fixed
- * output voltage of 1.5V. This supplies not only DDR_VDDC but
- * also DDR3_1V5 according to the schematics.
- */
- compatible = "regulator-fixed";
-
- regulator-name = "DDR_VDDC";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
-
- vin-supply = <&p5v0>;
- };
-
- vddee: regulator-vddee {
- /* Monolithic Power Systems MP2161 */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDEE";
- regulator-min-microvolt = <860000>;
- regulator-max-microvolt = <1140000>;
-
- vin-supply = <&p5v0>;
-
- pwms = <&pwm_cd 1 12218 0>;
- pwm-dutycycle-range = <91 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vdd_rtc: regulator-vdd-rtc {
- /*
- * Torex Semiconductor XC6215 configured for a fixed output of
- * 0.9V.
- */
- compatible = "regulator-fixed";
-
- regulator-name = "VDD_RTC";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
-
- vin-supply = <&vcc_3v3>;
- };
-};
-
-&cpu0 {
- cpu-supply = <&vcck>;
-};
-
-&efuse {
- ethernet_mac_address: mac@1b4 {
- reg = <0x1b4 0x6>;
- };
-};
-
-&ethmac {
- status = "okay";
-
- pinctrl-0 = <&eth_rgmii_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii";
- phy-handle = <&eth_phy>;
- amlogic,tx-delay-ns = <4>;
-
- nvmem-cells = <&ethernet_mac_address>;
- nvmem-cell-names = "mac-address";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Realtek RTL8211F (0x001cc916) */
- eth_phy: ethernet-phy@0 {
- reg = <0>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
- reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-
- interrupt-parent = <&gpio_intc>;
- /* GPIOH_3 */
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
- };
- };
-};
-
-&gpio {
- gpio-line-names = /* Bank GPIOX */
- "J2 Header Pin 35", "J2 Header Pin 36",
- "J2 Header Pin 32", "J2 Header Pin 31",
- "J2 Header Pin 29", "J2 Header Pin 18",
- "J2 Header Pin 22", "J2 Header Pin 16",
- "J2 Header Pin 23", "J2 Header Pin 21",
- "J2 Header Pin 19", "J2 Header Pin 33",
- "J2 Header Pin 8", "J2 Header Pin 10",
- "J2 Header Pin 15", "J2 Header Pin 13",
- "J2 Header Pin 24", "J2 Header Pin 26",
- /* Bank GPIOY */
- "Revision (upper)", "Revision (lower)",
- "J2 Header Pin 7", "", "J2 Header Pin 12",
- "J2 Header Pin 11", "", "", "",
- "TFLASH_VDD_EN", "", "",
- /* Bank GPIODV */
- "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL",
- "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)",
- "",
- /* Bank GPIOH */
- "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
- "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1",
- "ETH_TXD0", "ETH_TXD3", "ETH_TXD2",
- "ETH_RGMII_TX_CLK",
- /* Bank CARD */
- "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)",
- "SD_CLK", "SD_CMD", "SD_DATA3 (SDB_D3)",
- "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)",
- /* Bank BOOT */
- "SDC_D0 (EMMC)", "SDC_D1 (EMMC)",
- "SDC_D2 (EMMC)", "SDC_D3 (EMMC)",
- "SDC_D4 (EMMC)", "SDC_D5 (EMMC)",
- "SDC_D6 (EMMC)", "SDC_D7 (EMMC)",
- "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)",
- "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "",
- "", "", "", "",
- /* Bank DIF */
- "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV",
- "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2",
- "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT",
- "ETH_MDC", "ETH_MDIO";
-};
-
-&gpio_ao {
- gpio-line-names = "UART TX", "UART RX", "",
- "TF_3V3N_1V8_EN", "USB_HUB_RST_N",
- "USB_OTG_PWREN", "J7 Header Pin 2",
- "IR_IN", "J7 Header Pin 4",
- "J7 Header Pin 6", "J7 Header Pin 5",
- "J7 Header Pin 7", "HDMI_CEC",
- "SYS_LED", "", "";
-
- /*
- * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
- * to be turned high in order to be detected by the USB Controller.
- * This signal should be handled by a USB specific power sequence
- * in order to reset the Hub when USB bus is powered down.
- */
- usb-hub {
- gpio-hog;
- gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb-hub-reset";
- };
-};
-
-&ir_receiver {
- status = "okay";
- pinctrl-0 = <&ir_recv_pins>;
- pinctrl-names = "default";
-};
-
-&mali {
- mali-supply = <&vddee>;
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vcc_1v8>;
-};
-
-&sdio {
- status = "okay";
-
- pinctrl-0 = <&sd_b_pins>;
- pinctrl-names = "default";
-
- /* SD card */
- sd_card_slot: slot@1 {
- compatible = "mmc-slot";
- reg = <1>;
- status = "okay";
-
- bus-width = <4>;
- no-sdio;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- disable-wp;
-
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
- vmmc-supply = <&tflash_vdd>;
- vqmmc-supply = <&tf_io>;
- };
-};
-
-&pwm_cd {
- status = "okay";
- pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>, <&xtal>;
- clock-names = "clkin0", "clkin1";
-};
-
-&rtc {
- /* needs to be enabled manually when a battery is connected */
- clocks = <&rtc32k_xtal>;
- vdd-supply = <&vdd_rtc>;
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 19:39:24 +0000