diff options
Diffstat (limited to 'dts/src/arm/omap-zoom-common.dtsi')
-rw-r--r-- | dts/src/arm/omap-zoom-common.dtsi | 92 |
1 files changed, 0 insertions, 92 deletions
diff --git a/dts/src/arm/omap-zoom-common.dtsi b/dts/src/arm/omap-zoom-common.dtsi deleted file mode 100644 index d4ad9e58b1..0000000000 --- a/dts/src/arm/omap-zoom-common.dtsi +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Common features on the Zoom debug board - */ - -#include "omap-gpmc-smsc911x.dtsi" - -&gpmc { - ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */ - <7 0 0x2c000000 0x01000000>; - - /* - * Four port TL16CP754C serial port on GPMC, - * they probably share the same GPIO IRQ - * REVISIT: Add timing support from slls644g.pdf - */ - uart@3,0 { - compatible = "ns16550a"; - reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ - bank-width = <2>; - reg-shift = <1>; - reg-io-width = <1>; - interrupt-parent = <&gpio4>; - interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ - clock-frequency = <1843200>; - current-speed = <115200>; - gpmc,mux-add-data = <0>; - gpmc,device-width = <1>; - gpmc,wait-pin = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; - gpmc,cs-on-ns = <5>; - gpmc,cs-rd-off-ns = <155>; - gpmc,cs-wr-off-ns = <155>; - gpmc,adv-on-ns = <15>; - gpmc,adv-rd-off-ns = <40>; - gpmc,adv-wr-off-ns = <40>; - gpmc,oe-on-ns = <45>; - gpmc,oe-off-ns = <145>; - gpmc,we-on-ns = <45>; - gpmc,we-off-ns = <145>; - gpmc,rd-cycle-ns = <155>; - gpmc,wr-cycle-ns = <155>; - gpmc,access-ns = <145>; - gpmc,page-burst-access-ns = <20>; - gpmc,bus-turnaround-ns = <20>; - gpmc,cycle2cycle-delay-ns = <20>; - gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-data-mux-bus-ns = <45>; - gpmc,wr-access-ns = <145>; - }; - uart@3,1 { - compatible = "ns16550a"; - reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ - bank-width = <2>; - reg-shift = <1>; - reg-io-width = <1>; - interrupt-parent = <&gpio4>; - interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ - clock-frequency = <1843200>; - current-speed = <115200>; - }; - uart@3,2 { - compatible = "ns16550a"; - reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ - bank-width = <2>; - reg-shift = <1>; - reg-io-width = <1>; - interrupt-parent = <&gpio4>; - interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ - clock-frequency = <1843200>; - current-speed = <115200>; - }; - uart@3,3 { - compatible = "ns16550a"; - reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ - bank-width = <2>; - reg-shift = <1>; - reg-io-width = <1>; - interrupt-parent = <&gpio4>; - interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ - clock-frequency = <1843200>; - current-speed = <115200>; - }; - - ethernet@gpmc { - reg = <7 0 0xff>; - interrupt-parent = <&gpio5>; - interrupts = <30 IRQ_TYPE_LEVEL_LOW>; /* gpio158 */ - }; -}; |