diff options
Diffstat (limited to 'dts/src/arm/omap3-cm-t3517.dts')
| -rw-r--r-- | dts/src/arm/omap3-cm-t3517.dts | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/dts/src/arm/omap3-cm-t3517.dts b/dts/src/arm/omap3-cm-t3517.dts deleted file mode 100644 index 3b8349094b..0000000000 --- a/dts/src/arm/omap3-cm-t3517.dts +++ /dev/null @@ -1,158 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Support for CompuLab CM-T3517 - */ -/dts-v1/; - -#include "am3517.dtsi" -#include "omap3-cm-t3x.dtsi" - -/ { - model = "CompuLab CM-T3517"; - compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; - - vmmc: regulator-vmmc { - compatible = "regulator-fixed"; - regulator-name = "vmmc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - wl12xx_vmmc2: wl12xx_vmmc2 { - compatible = "regulator-fixed"; - regulator-name = "vw1271"; - pinctrl-names = "default"; - pinctrl-0 = < - &wl12xx_wkup_pins - &wl12xx_core_pins - >; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */ - startup-delay-us = <20000>; - enable-active-high; - }; - - wl12xx_vaux2: wl12xx_vaux2 { - compatible = "regulator-fixed"; - regulator-name = "vwl1271_vaux2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; -}; - -&omap3_pmx_wkup { - - wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ - OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4) /* sys_boot4.gpio_6 */ - >; - }; -}; - -&omap3_pmx_core { - - phy1_reset_pins: pinmux_hsusb1_phy_reset_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4) /* uart2_tx.gpio_146 */ - >; - }; - - phy2_reset_pins: pinmux_hsusb2_phy_reset_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4) /* uart2_rx.gpio_147 */ - >; - }; - - otg_drv_vbus: pinmux_otg_drv_vbus { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */ - >; - }; - - mmc2_pins: pinmux_mmc2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ - OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ - OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ - OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ - OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ - >; - }; - - wl12xx_core_pins: pinmux_wl12xx_core_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */ - OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_rts.gpio_145 */ - >; - }; - - usb_hub_pins: pinmux_usb_hub_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_clkx.gpio_152 - USB HUB RST */ - >; - }; -}; - -&hsusb1_phy { - pinctrl-names = "default"; - pinctrl-0 = <&phy1_reset_pins>; - reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>; -}; - -&hsusb2_phy { - pinctrl-names = "default"; - pinctrl-0 = <&phy2_reset_pins>; - reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; -}; - -&davinci_emac { - status = "okay"; -}; - -&davinci_mdio { - status = "okay"; -}; - -&am35x_otg_hs { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&otg_drv_vbus>; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - vmmc-supply = <&wl12xx_vmmc2>; - vqmmc-supply = <&wl12xx_vaux2>; - non-removable; - bus-width = <4>; - cap-power-off-card; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1271"; - reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 145 */ - ref-clock-frequency = <38400000>; - }; -}; - -&dss { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = < - &dss_dpi_pins_common - &dss_dpi_pins_cm_t35x - >; -}; - |