diff options
Diffstat (limited to 'dts/src/arm/omap3-evm-37xx.dts')
| -rw-r--r-- | dts/src/arm/omap3-evm-37xx.dts | 102 |
1 files changed, 102 insertions, 0 deletions
diff --git a/dts/src/arm/omap3-evm-37xx.dts b/dts/src/arm/omap3-evm-37xx.dts index 4f9a765446..c963b31ec3 100644 --- a/dts/src/arm/omap3-evm-37xx.dts +++ b/dts/src/arm/omap3-evm-37xx.dts @@ -34,7 +34,15 @@ >; }; +&hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&ehci_phy_pins>; +}; + &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; + dss_dpi_pins1: pinmux_dss_dpi_pins2 { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ @@ -98,6 +106,37 @@ >; }; + /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ + on_board_gpio_61: pinmux_ehci_port_select_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + + /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs1.hsusb2_data3 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; + wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ @@ -112,6 +151,46 @@ }; }; +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + + ehci_phy_pins: pinmux_ehci_phy_pins { + pinctrl-single,pins = < + + /* EHCI PHY reset GPIO etk_d7.gpio_21 */ + OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) + + /* EHCI VBUS etk_d8.gpio_22 */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + + /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) + + /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) + + /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d15.hsusb2_data1 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + &omap3_pmx_wkup { dss_dpi_pins2: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < @@ -153,6 +232,29 @@ pinctrl-0 = <&uart3_pins>; }; +/* + * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface + * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. + */ +&gpio2 { + en_usb2_port { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ + output-low; + line-name = "enable usb2 port"; + }; +}; + +/* T2_GPIO_2 low to route GPIO_61 to on-board devices */ +&twl_gpio { + en_on_board_gpio_61 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "en_hsusb2_clk"; + }; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; |