diff options
Diffstat (limited to 'dts/src/arm/omap3-n900.dts')
-rw-r--r-- | dts/src/arm/omap3-n900.dts | 1156 |
1 files changed, 0 insertions, 1156 deletions
diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts deleted file mode 100644 index 4089d97405..0000000000 --- a/dts/src/arm/omap3-n900.dts +++ /dev/null @@ -1,1156 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> - * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi> - */ - -/dts-v1/; - -#include "omap34xx.dtsi" -#include <dt-bindings/input/input.h> - -/* - * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall - * for omap AES HW crypto support. When linux kernel try to access memory of AES - * blocks then kernel receive "Unhandled fault: external abort on non-linefetch" - * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no - * crash anymore) omap AES support will be disabled for all Nokia N900 devices. - * There is "unofficial" version of bootloader which enables AES in L3 firewall - * but it is not widely used and to prevent kernel crash rather AES is disabled. - * There is also no runtime detection code if AES is disabled in L3 firewall... - */ -&aes { - status = "disabled"; -}; - -/ { - model = "Nokia N900"; - compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; - - aliases { - i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - display0 = &lcd; - display1 = &tv; - }; - - cpus { - cpu@0 { - cpu0-supply = <&vcc>; - }; - }; - - leds { - compatible = "gpio-leds"; - heartbeat { - label = "debug::sleep"; - gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */ - linux,default-trigger = "default-on"; - pinctrl-names = "default"; - pinctrl-0 = <&debug_leds>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - gpio_keys { - compatible = "gpio-keys"; - - camera_lens_cover { - label = "Camera Lens Cover"; - gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ - linux,input-type = <EV_SW>; - linux,code = <SW_CAMERA_LENS_COVER>; - linux,can-disable; - }; - - camera_focus { - label = "Camera Focus"; - gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ - linux,code = <KEY_CAMERA_FOCUS>; - linux,can-disable; - }; - - camera_capture { - label = "Camera Capture"; - gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ - linux,code = <KEY_CAMERA>; - linux,can-disable; - }; - - lock_button { - label = "Lock Button"; - gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ - linux,code = <KEY_SCREENLOCK>; - linux,can-disable; - }; - - keypad_slide { - label = "Keypad Slide"; - gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ - linux,input-type = <EV_SW>; - linux,code = <SW_KEYPAD_SLIDE>; - linux,can-disable; - }; - - proximity_sensor { - label = "Proximity Sensor"; - gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ - linux,input-type = <EV_SW>; - linux,code = <SW_FRONT_PROXIMITY>; - linux,can-disable; - }; - }; - - isp1707: isp1707 { - compatible = "nxp,isp1707"; - nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; - usb-phy = <&usb2_phy>; - }; - - tv: connector { - compatible = "composite-video-connector"; - label = "tv"; - - port { - tv_connector_in: endpoint { - remote-endpoint = <&venc_out>; - }; - }; - }; - - sound: n900-audio { - compatible = "nokia,n900-audio"; - - nokia,cpu-dai = <&mcbsp2>; - nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>; - nokia,headphone-amplifier = <&tpa6130a2>; - - tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */ - jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */ - eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ - speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; - }; - - battery: n900-battery { - compatible = "nokia,n900-battery"; - io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>; - io-channel-names = "temp", "bsi", "vbat"; - }; - - pwm9: dmtimer-pwm { - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer9>; - ti,clock-source = <0x00>; /* timer_sys_ck */ - }; - - ir: n900-ir { - compatible = "nokia,n900-ir"; - pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ - }; - - rom_rng: rng { - compatible = "nokia,n900-rom-rng"; - clocks = <&rng_ick>; - clock-names = "ick"; - }; - - /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */ - vctcxo: vctcxo { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - }; -}; - -&isp { - vdds_csib-supply = <&vaux2>; - - pinctrl-names = "default"; - pinctrl-0 = <&camera_pins>; - - ports { - port@1 { - reg = <1>; - - csi_isp: endpoint { - remote-endpoint = <&csi_cam1>; - bus-type = <3>; /* CCP2 */ - clock-lanes = <1>; - data-lanes = <0>; - lane-polarity = <0 0>; - /* Select strobe = <1> for back camera, <0> for front camera */ - strobe = <1>; - }; - }; - }; -}; - -&omap3_pmx_core { - pinctrl-names = "default"; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ - OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ - OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ - >; - }; - - ethernet_pins: pinmux_ethernet_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */ - OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */ - >; - }; - - gpmc_pins: pinmux_gpmc_pins { - pinctrl-single,pins = < - - /* address lines */ - OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ - OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ - OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ - - /* data lines, gpmc_d0..d7 not muxable according to TRM */ - OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ - OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ - OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ - OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ - OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ - OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ - OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ - OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ - - /* - * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable - * according to TRM. OneNAND seems to require PIN_INPUT on clock. - */ - OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ - OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ - OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ - >; - }; - - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ - OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ - >; - }; - - debug_leds: pinmux_debug_led_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ - >; - }; - - mcspi4_pins: pinmux_mcspi4_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ - OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ - OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ - OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ - >; - }; - - mmc1_pins: pinmux_mmc1_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ - OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ - OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ - OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ - OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ - OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ - >; - }; - - mmc2_pins: pinmux_mmc2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ - OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ - OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ - OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ - OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ - OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ - OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ - OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ - OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ - OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ - >; - }; - - acx565akm_pins: pinmux_acx565akm_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ - >; - }; - - dss_sdi_pins: pinmux_dss_sdi_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ - - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ - >; - }; - - wl1251_pins: pinmux_wl1251 { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ - OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ - >; - }; - - ssi_pins: pinmux_ssi { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ - OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ - OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ - OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ - OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ - OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ - OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ - >; - }; - - modem_pins: pinmux_modem { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */ - OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ - OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ - OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ - OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ - >; - }; - - camera_pins: pinmux_camera { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */ - OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */ - OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ - OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */ - OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */ - OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */ - OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */ - OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */ - OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */ - OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */ - OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */ - >; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <2200000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - }; -}; - -#include "twl4030.dtsi" -#include "twl4030_omap3.dtsi" - -&vaux1 { - regulator-name = "V28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ - regulator-always-on; /* due to battery cover sensor */ -}; - -&vaux2 { - regulator-name = "VCSI"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ -}; - -&vaux3 { - regulator-name = "VMMC2_30"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3000000>; - regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ -}; - -&vaux4 { - regulator-name = "VCAM_ANA_28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ -}; - -&vmmc1 { - regulator-name = "VMMC1"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <3150000>; - regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ -}; - -&vmmc2 { - regulator-name = "V28_A"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3000000>; - regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ - regulator-always-on; /* due VIO leak to AIC34 VDDs */ -}; - -&vpll1 { - regulator-name = "VPLL"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ - regulator-always-on; -}; - -&vpll2 { - regulator-name = "VSDI_CSI"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ - regulator-always-on; -}; - -&vsim { - regulator-name = "VMMC2_IO_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ -}; - -&vio { - regulator-name = "VIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; -}; - -&vintana1 { - regulator-name = "VINTANA1"; - /* fixed to 1500000 */ - regulator-always-on; -}; - -&vintana2 { - regulator-name = "VINTANA2"; - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <2750000>; - regulator-always-on; -}; - -&vintdig { - regulator-name = "VINTDIG"; - /* fixed to 1500000 */ - regulator-always-on; -}; - -/* First two dma channels are reserved on secure omap3 */ -&sdma { - dma-channel-mask = <0xfffffffc>; -}; - -&twl { - twl_audio: audio { - compatible = "ti,twl4030-audio"; - ti,enable-vibra = <1>; - }; - - twl_power: power { - compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; - ti,use_poweroff; - }; -}; - -&twl_keypad { - linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q) - MATRIX_KEY(0x00, 0x01, KEY_O) - MATRIX_KEY(0x00, 0x02, KEY_P) - MATRIX_KEY(0x00, 0x03, KEY_COMMA) - MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE) - MATRIX_KEY(0x00, 0x06, KEY_A) - MATRIX_KEY(0x00, 0x07, KEY_S) - - MATRIX_KEY(0x01, 0x00, KEY_W) - MATRIX_KEY(0x01, 0x01, KEY_D) - MATRIX_KEY(0x01, 0x02, KEY_F) - MATRIX_KEY(0x01, 0x03, KEY_G) - MATRIX_KEY(0x01, 0x04, KEY_H) - MATRIX_KEY(0x01, 0x05, KEY_J) - MATRIX_KEY(0x01, 0x06, KEY_K) - MATRIX_KEY(0x01, 0x07, KEY_L) - - MATRIX_KEY(0x02, 0x00, KEY_E) - MATRIX_KEY(0x02, 0x01, KEY_DOT) - MATRIX_KEY(0x02, 0x02, KEY_UP) - MATRIX_KEY(0x02, 0x03, KEY_ENTER) - MATRIX_KEY(0x02, 0x05, KEY_Z) - MATRIX_KEY(0x02, 0x06, KEY_X) - MATRIX_KEY(0x02, 0x07, KEY_C) - MATRIX_KEY(0x02, 0x08, KEY_F9) - - MATRIX_KEY(0x03, 0x00, KEY_R) - MATRIX_KEY(0x03, 0x01, KEY_V) - MATRIX_KEY(0x03, 0x02, KEY_B) - MATRIX_KEY(0x03, 0x03, KEY_N) - MATRIX_KEY(0x03, 0x04, KEY_M) - MATRIX_KEY(0x03, 0x05, KEY_SPACE) - MATRIX_KEY(0x03, 0x06, KEY_SPACE) - MATRIX_KEY(0x03, 0x07, KEY_LEFT) - - MATRIX_KEY(0x04, 0x00, KEY_T) - MATRIX_KEY(0x04, 0x01, KEY_DOWN) - MATRIX_KEY(0x04, 0x02, KEY_RIGHT) - MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL) - MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT) - MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT) - MATRIX_KEY(0x04, 0x08, KEY_F10) - - MATRIX_KEY(0x05, 0x00, KEY_Y) - MATRIX_KEY(0x05, 0x08, KEY_F11) - - MATRIX_KEY(0x06, 0x00, KEY_U) - - MATRIX_KEY(0x07, 0x00, KEY_I) - MATRIX_KEY(0x07, 0x01, KEY_F7) - MATRIX_KEY(0x07, 0x02, KEY_F8) - >; -}; - -&twl_gpio { - ti,pullups = <0x0>; - ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - clock-frequency = <100000>; - - tlv320aic3x: tlv320aic3x@18 { - compatible = "ti,tlv320aic3x"; - reg = <0x18>; - reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ - ai3x-gpio-func = < - 0 /* AIC3X_GPIO1_FUNC_DISABLED */ - 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ - >; - - AVDD-supply = <&vmmc2>; - DRVDD-supply = <&vmmc2>; - IOVDD-supply = <&vio>; - DVDD-supply = <&vio>; - - ai3x-micbias-vg = <1>; - }; - - tlv320aic3x_aux: tlv320aic3x@19 { - compatible = "ti,tlv320aic3x"; - reg = <0x19>; - reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ - - AVDD-supply = <&vmmc2>; - DRVDD-supply = <&vmmc2>; - IOVDD-supply = <&vio>; - DVDD-supply = <&vio>; - - ai3x-micbias-vg = <2>; - }; - - tsl2563: tsl2563@29 { - compatible = "amstaos,tsl2563"; - reg = <0x29>; - - amstaos,cover-comp-gain = <16>; - }; - - adp1653: led-controller@30 { - compatible = "adi,adp1653"; - reg = <0x30>; - enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ - - flash { - flash-timeout-us = <500000>; - flash-max-microamp = <320000>; - led-max-microamp = <50000>; - }; - indicator { - led-max-microamp = <17500>; - }; - }; - - lp5523: lp5523@32 { - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ - enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ - - chan0 { - chan-name = "lp5523:kb1"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - }; - - chan1 { - chan-name = "lp5523:kb2"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - }; - - chan2 { - chan-name = "lp5523:kb3"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - }; - - chan3 { - chan-name = "lp5523:kb4"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - }; - - chan4 { - chan-name = "lp5523:b"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - }; - - chan5 { - chan-name = "lp5523:g"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - }; - - chan6 { - chan-name = "lp5523:r"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - }; - - chan7 { - chan-name = "lp5523:kb5"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - }; - - chan8 { - chan-name = "lp5523:kb6"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - }; - }; - - bq27200: bq27200@55 { - compatible = "ti,bq27200"; - reg = <0x55>; - power-supplies = <&bq24150a>; - }; - - /* Stereo headphone amplifier */ - tpa6130a2: tpa6130a2@60 { - compatible = "ti,tpa6130a2"; - reg = <0x60>; - - Vdd-supply = <&vmmc2>; - - power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */ - }; - - si4713: si4713@63 { - compatible = "silabs,si4713"; - reg = <0x63>; - - interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ - reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ - vio-supply = <&vio>; - vdd-supply = <&vaux1>; - }; - - bq24150a: bq24150a@6b { - compatible = "ti,bq24150a"; - reg = <0x6b>; - - ti,current-limit = <100>; - ti,weak-battery-voltage = <3400>; - ti,battery-regulation-voltage = <4200>; - ti,charge-current = <650>; - ti,termination-current = <100>; - ti,resistor-sense = <68>; - - ti,usb-charger-detection = <&isp1707>; - }; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - - clock-frequency = <400000>; - - lis302dl: lis3lv02d@1d { - compatible = "st,lis3lv02d"; - reg = <0x1d>; - - Vdd-supply = <&vaux1>; - Vdd_IO-supply = <&vio>; - - interrupt-parent = <&gpio6>; - interrupts = <21 20>; /* 181 and 180 */ - - /* click flags */ - st,click-single-x; - st,click-single-y; - st,click-single-z; - - /* Limits are 0.5g * value */ - st,click-threshold-x = <8>; - st,click-threshold-y = <8>; - st,click-threshold-z = <10>; - - /* Click must be longer than time limit */ - st,click-time-limit = <9>; - - /* Kind of debounce filter */ - st,click-latency = <50>; - - /* Interrupt line 2 for click detection */ - st,irq2-click; - - st,wakeup-x-hi; - st,wakeup-y-hi; - st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ - - st,wakeup2-z-hi; - st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */ - - st,hipass1-disable; - st,hipass2-disable; - - st,axis-x = <1>; /* LIS3_DEV_X */ - st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */ - st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */ - - st,min-limit-x = <(-32)>; - st,min-limit-y = <3>; - st,min-limit-z = <3>; - - st,max-limit-x = <(-3)>; - st,max-limit-y = <32>; - st,max-limit-z = <32>; - }; - - cam1: camera@3e { - compatible = "toshiba,et8ek8"; - reg = <0x3e>; - - vana-supply = <&vaux4>; - - clocks = <&isp 0>; - clock-names = "extclk"; - clock-frequency = <9600000>; - - reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ - - lens-focus = <&ad5820>; - - port { - csi_cam1: endpoint { - bus-type = <3>; /* CCP2 */ - strobe = <1>; - clock-inv = <0>; - crc = <1>; - - remote-endpoint = <&csi_isp>; - }; - }; - }; - - /* D/A converter for auto-focus */ - ad5820: dac@c { - compatible = "adi,ad5820"; - reg = <0x0c>; - - VANA-supply = <&vaux4>; - - #io-channel-cells = <0>; - }; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <&vmmc1>; - bus-width = <4>; - /* For debugging, it is often good idea to remove this GPIO. - It means you can remove back cover (to reboot by removing - battery) and still use the MMC card. */ - cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ -}; - -/* most boards use vaux3, only some old versions use vmmc2 instead */ -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - vmmc-supply = <&vaux3>; - vqmmc-supply = <&vsim>; - bus-width = <8>; - non-removable; - no-sdio; - no-sd; -}; - -&mmc3 { - status = "disabled"; -}; - -&gpmc { - ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ - <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ - pinctrl-names = "default"; - pinctrl-0 = <&gpmc_pins>; - - /* sys_ndmareq1 could be used by the driver, not as gpio65 though */ - onenand@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "ti,omap2-onenand"; - reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ - - /* - * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported - * bootloader set values when booted with v5.1 - * (OneNAND Manufacturer: Samsung): - * - * cs0 GPMC_CS_CONFIG1: 0xfb001202 - * cs0 GPMC_CS_CONFIG2: 0x00111100 - * cs0 GPMC_CS_CONFIG3: 0x00020200 - * cs0 GPMC_CS_CONFIG4: 0x11001102 - * cs0 GPMC_CS_CONFIG5: 0x03101616 - * cs0 GPMC_CS_CONFIG6: 0x90060000 - */ - gpmc,sync-read; - gpmc,sync-write; - gpmc,burst-length = <16>; - gpmc,burst-read; - gpmc,burst-wrap; - gpmc,burst-write; - gpmc,device-width = <2>; - gpmc,mux-add-data = <2>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <102>; - gpmc,cs-wr-off-ns = <102>; - gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <12>; - gpmc,adv-wr-off-ns = <12>; - gpmc,oe-on-ns = <12>; - gpmc,oe-off-ns = <102>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <102>; - gpmc,rd-cycle-ns = <132>; - gpmc,wr-cycle-ns = <132>; - gpmc,access-ns = <96>; - gpmc,page-burst-access-ns = <18>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <6>; - gpmc,wr-data-mux-bus-ns = <36>; - gpmc,wr-access-ns = <96>; - gpmc,sync-clk-ps = <15000>; - - /* - * MTD partition table corresponding to Nokia's - * Maemo 5 (Fremantle) release. - */ - partition@0 { - label = "bootloader"; - reg = <0x00000000 0x00020000>; - read-only; - }; - partition@1 { - label = "config"; - reg = <0x00020000 0x00060000>; - }; - partition@2 { - label = "log"; - reg = <0x00080000 0x00040000>; - }; - partition@3 { - label = "kernel"; - reg = <0x000c0000 0x00200000>; - }; - partition@4 { - label = "initfs"; - reg = <0x002c0000 0x00200000>; - }; - partition@5 { - label = "rootfs"; - reg = <0x004c0000 0x0fb40000>; - }; - }; - - /* Ethernet is on some early development boards and qemu */ - ethernet@gpmc { - compatible = "smsc,lan91c94"; - interrupt-parent = <&gpio2>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ - reg = <1 0 0xf>; /* 16 byte IO range */ - bank-width = <2>; - pinctrl-names = "default"; - pinctrl-0 = <ðernet_pins>; - power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */ - reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */ - gpmc,device-width = <2>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <48>; - gpmc,cs-wr-off-ns = <24>; - gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <0>; - gpmc,adv-wr-off-ns = <0>; - gpmc,we-on-ns = <12>; - gpmc,we-off-ns = <18>; - gpmc,oe-on-ns = <12>; - gpmc,oe-off-ns = <48>; - gpmc,page-burst-access-ns = <0>; - gpmc,access-ns = <42>; - gpmc,rd-cycle-ns = <180>; - gpmc,wr-cycle-ns = <180>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <0>; - gpmc,wr-data-mux-bus-ns = <12>; - }; -}; - -&mcspi1 { - /* - * For some reason, touchscreen is necessary for screen to work at - * all on real hw. It works well without it on emulator. - * - * Also... order in the device tree actually matters here. - */ - tsc2005@0 { - compatible = "ti,tsc2005"; - spi-max-frequency = <6000000>; - reg = <0>; - - vio-supply = <&vio>; - - reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ - interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ - - touchscreen-fuzz-x = <4>; - touchscreen-fuzz-y = <7>; - touchscreen-fuzz-pressure = <2>; - touchscreen-size-x = <4096>; - touchscreen-size-y = <4096>; - touchscreen-max-pressure = <2048>; - - ti,x-plate-ohms = <280>; - ti,esd-recovery-timeout-ms = <8000>; - }; - - lcd: acx565akm@2 { - compatible = "sony,acx565akm"; - spi-max-frequency = <6000000>; - reg = <2>; - - pinctrl-names = "default"; - pinctrl-0 = <&acx565akm_pins>; - - label = "lcd"; - reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ - - port { - lcd_in: endpoint { - remote-endpoint = <&sdi_out>; - }; - }; - }; -}; - -&mcspi4 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi4_pins>; - - wl1251@0 { - pinctrl-names = "default"; - pinctrl-0 = <&wl1251_pins>; - - vio-supply = <&vio>; - - compatible = "ti,wl1251"; - reg = <0>; - spi-max-frequency = <48000000>; - - spi-cpol; - spi-cpha; - - ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ - - interrupt-parent = <&gpio2>; - interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ - - clocks = <&vctcxo>; - }; -}; - -/* RNG not directly accessible on n900, see omap3-rom-rng instead */ -&rng_target { - status = "disabled"; -}; - -&usb_otg_hs { - interface-type = <0>; - usb-phy = <&usb2_phy>; - phys = <&usb2_phy>; - phy-names = "usb2-phy"; - mode = <2>; - power = <50>; -}; - -&uart1 { - status = "disabled"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - - bcm2048: bluetooth { - compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth"; - reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */ - host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ - bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ - clocks = <&vctcxo>; - clock-names = "sysclk"; - }; -}; - -&uart3 { - interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; -}; - -&dss { - status = "ok"; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_sdi_pins>; - - vdds_sdi-supply = <&vaux1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - sdi_out: endpoint { - remote-endpoint = <&lcd_in>; - datapairs = <2>; - }; - }; - }; -}; - -&venc { - status = "ok"; - - vdda-supply = <&vdac>; - - port { - venc_out: endpoint { - remote-endpoint = <&tv_connector_in>; - ti,channels = <1>; - }; - }; -}; - -&mcbsp2 { - status = "ok"; -}; - -&ssi_port1 { - pinctrl-names = "default"; - pinctrl-0 = <&ssi_pins>; - - ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ - - modem: hsi-client { - compatible = "nokia,n900-modem"; - - pinctrl-names = "default"; - pinctrl-0 = <&modem_pins>; - - hsi-channel-ids = <0>, <1>, <2>, <3>; - hsi-channel-names = "mcsaab-control", - "speech-control", - "speech-data", - "mcsaab-data"; - hsi-speed-kbps = <55000>; - hsi-mode = "frame"; - hsi-flow = "synchronized"; - hsi-arb-mode = "round-robin"; - - interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ - - gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ - <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ - <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ - <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */ - <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */ - gpio-names = "cmt_apeslpx", - "cmt_rst_rq", - "cmt_en", - "cmt_rst", - "cmt_bsi"; - }; -}; - -&ssi_port2 { - status = "disabled"; -}; |