summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/omap3-n900.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/omap3-n900.dts')
-rw-r--r--dts/src/arm/omap3-n900.dts1194
1 files changed, 0 insertions, 1194 deletions
diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts
deleted file mode 100644
index d40c3d2c49..0000000000
--- a/dts/src/arm/omap3-n900.dts
+++ /dev/null
@@ -1,1194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
- */
-
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/*
- * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
- * for omap AES HW crypto support. When linux kernel try to access memory of AES
- * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
- * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
- * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
- * There is "unofficial" version of bootloader which enables AES in L3 firewall
- * but it is not widely used and to prevent kernel crash rather AES is disabled.
- * There is also no runtime detection code if AES is disabled in L3 firewall...
- */
-&aes1_target {
- status = "disabled";
-};
-
-&aes2_target {
- status = "disabled";
-};
-
-/ {
- model = "Nokia N900";
- compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
-
- aliases {
- i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- display0 = &lcd;
- display1 = &tv;
- };
-
- cpus {
- cpu@0 {
- cpu0-supply = <&vcc>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- heartbeat {
- label = "debug::sleep";
- gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */
- linux,default-trigger = "default-on";
- pinctrl-names = "default";
- pinctrl-0 = <&debug_leds>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- camera_lens_cover {
- label = "Camera Lens Cover";
- gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
- linux,input-type = <EV_SW>;
- linux,code = <SW_CAMERA_LENS_COVER>;
- linux,can-disable;
- };
-
- camera_focus {
- label = "Camera Focus";
- gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
- linux,code = <KEY_CAMERA_FOCUS>;
- linux,can-disable;
- };
-
- camera_capture {
- label = "Camera Capture";
- gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
- linux,code = <KEY_CAMERA>;
- linux,can-disable;
- };
-
- lock_button {
- label = "Lock Button";
- gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
- linux,code = <KEY_SCREENLOCK>;
- linux,can-disable;
- };
-
- keypad_slide {
- label = "Keypad Slide";
- gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
- linux,input-type = <EV_SW>;
- linux,code = <SW_KEYPAD_SLIDE>;
- linux,can-disable;
- };
-
- proximity_sensor {
- label = "Proximity Sensor";
- gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
- linux,input-type = <EV_SW>;
- linux,code = <SW_FRONT_PROXIMITY>;
- linux,can-disable;
- };
-
- machine_cover {
- label = "Machine Cover";
- gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
- linux,input-type = <EV_SW>;
- linux,code = <SW_MACHINE_COVER>;
- linux,can-disable;
- };
- };
-
- isp1707: isp1707 {
- compatible = "nxp,isp1707";
- nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
- usb-phy = <&usb2_phy>;
- };
-
- tv: connector {
- compatible = "composite-video-connector";
- label = "tv";
-
- port {
- tv_connector_in: endpoint {
- remote-endpoint = <&venc_out>;
- };
- };
- };
-
- sound: n900-audio {
- compatible = "nokia,n900-audio";
-
- nokia,cpu-dai = <&mcbsp2>;
- nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
- nokia,headphone-amplifier = <&tpa6130a2>;
-
- tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
- jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
- eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
- speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
- };
-
- battery: n900-battery {
- compatible = "nokia,n900-battery";
- io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
- io-channel-names = "temp", "bsi", "vbat";
- };
-
- pwm9: dmtimer-pwm {
- compatible = "ti,omap-dmtimer-pwm";
- #pwm-cells = <3>;
- ti,timers = <&timer9>;
- ti,clock-source = <0x00>; /* timer_sys_ck */
- };
-
- ir: n900-ir {
- compatible = "nokia,n900-ir";
- pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
- };
-
- rom_rng: rng {
- compatible = "nokia,n900-rom-rng";
- clocks = <&rng_ick>;
- clock-names = "ick";
- };
-
- /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
- vctcxo: vctcxo {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <38400000>;
- };
-};
-
-&isp {
- vdds_csib-supply = <&vaux2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&camera_pins>;
-
- ports {
- port@1 {
- reg = <1>;
-
- csi_isp: endpoint {
- remote-endpoint = <&csi_cam1>;
- bus-type = <3>; /* CCP2 */
- clock-lanes = <1>;
- data-lanes = <0>;
- lane-polarity = <0 0>;
- /* Select strobe = <1> for back camera, <0> for front camera */
- strobe = <1>;
- };
- };
- };
-};
-
-&omap3_pmx_core {
- pinctrl-names = "default";
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
- OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
- OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
- OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
- >;
- };
-
- ethernet_pins: pinmux_ethernet_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
- OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */
- OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
- >;
- };
-
- gpmc_pins: pinmux_gpmc_pins {
- pinctrl-single,pins = <
-
- /* address lines */
- OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
- OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
- OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
-
- /* data lines, gpmc_d0..d7 not muxable according to TRM */
- OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
- OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
- OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
- OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
- OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
- OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
- OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
- OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
-
- /*
- * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
- * according to TRM. OneNAND seems to require PIN_INPUT on clock.
- */
- OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
- OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
- OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
- >;
- };
-
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
- OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
- >;
- };
-
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
- OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
- >;
- };
-
- debug_leds: pinmux_debug_led_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
- >;
- };
-
- mcspi4_pins: pinmux_mcspi4_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
- OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
- OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
- OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
- >;
- };
-
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
- OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
- OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
- OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
- OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
- OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
- >;
- };
-
- mmc2_pins: pinmux_mmc2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
- OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
- OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
- OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
- OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
- OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
- OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
- OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
- OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
- OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
- >;
- };
-
- acx565akm_pins: pinmux_acx565akm_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
- >;
- };
-
- dss_sdi_pins: pinmux_dss_sdi_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
- OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
- OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
- OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
-
- OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
- OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
- >;
- };
-
- wl1251_pins: pinmux_wl1251 {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
- OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
- >;
- };
-
- ssi_pins: pinmux_ssi {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
- OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
- OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
- OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
- OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
- OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
- OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
- OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
- >;
- };
-
- modem_pins: pinmux_modem {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
- OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */
- OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
- OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
- OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
- OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
- >;
- };
-
- camera_pins: pinmux_camera {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */
- OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */
- OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
- OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */
- OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */
- OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */
- OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */
- OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */
- OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */
- OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */
- OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */
- >;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
- clock-frequency = <2200000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
- };
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&vaux1 {
- regulator-name = "V28";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
- regulator-always-on; /* due to battery cover sensor */
-};
-
-&vaux2 {
- regulator-name = "VCSI";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vaux3 {
- regulator-name = "VMMC2_30";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3000000>;
- regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vaux4 {
- regulator-name = "VCAM_ANA_28";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vmmc1 {
- regulator-name = "VMMC1";
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <3150000>;
- regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vmmc2 {
- regulator-name = "V28_A";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3000000>;
- regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
- regulator-always-on; /* due VIO leak to AIC34 VDDs */
-};
-
-&vpll1 {
- regulator-name = "VPLL";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
- regulator-always-on;
-};
-
-&vpll2 {
- regulator-name = "VSDI_CSI";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
- regulator-always-on;
-};
-
-&vsim {
- regulator-name = "VMMC2_IO_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
-};
-
-&vio {
- regulator-name = "VIO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-};
-
-&vintana1 {
- regulator-name = "VINTANA1";
- /* fixed to 1500000 */
- regulator-always-on;
-};
-
-&vintana2 {
- regulator-name = "VINTANA2";
- regulator-min-microvolt = <2750000>;
- regulator-max-microvolt = <2750000>;
- regulator-always-on;
-};
-
-&vintdig {
- regulator-name = "VINTDIG";
- /* fixed to 1500000 */
- regulator-always-on;
-};
-
-/* First two dma channels are reserved on secure omap3 */
-&sdma {
- dma-channel-mask = <0xfffffffc>;
-};
-
-&twl {
- twl_audio: audio {
- compatible = "ti,twl4030-audio";
- ti,enable-vibra = <1>;
- };
-
- twl_power: power {
- compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
- ti,use_poweroff;
- };
-};
-
-&twl_keypad {
- linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
- MATRIX_KEY(0x00, 0x01, KEY_O)
- MATRIX_KEY(0x00, 0x02, KEY_P)
- MATRIX_KEY(0x00, 0x03, KEY_COMMA)
- MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
- MATRIX_KEY(0x00, 0x06, KEY_A)
- MATRIX_KEY(0x00, 0x07, KEY_S)
-
- MATRIX_KEY(0x01, 0x00, KEY_W)
- MATRIX_KEY(0x01, 0x01, KEY_D)
- MATRIX_KEY(0x01, 0x02, KEY_F)
- MATRIX_KEY(0x01, 0x03, KEY_G)
- MATRIX_KEY(0x01, 0x04, KEY_H)
- MATRIX_KEY(0x01, 0x05, KEY_J)
- MATRIX_KEY(0x01, 0x06, KEY_K)
- MATRIX_KEY(0x01, 0x07, KEY_L)
-
- MATRIX_KEY(0x02, 0x00, KEY_E)
- MATRIX_KEY(0x02, 0x01, KEY_DOT)
- MATRIX_KEY(0x02, 0x02, KEY_UP)
- MATRIX_KEY(0x02, 0x03, KEY_ENTER)
- MATRIX_KEY(0x02, 0x05, KEY_Z)
- MATRIX_KEY(0x02, 0x06, KEY_X)
- MATRIX_KEY(0x02, 0x07, KEY_C)
- MATRIX_KEY(0x02, 0x08, KEY_F9)
-
- MATRIX_KEY(0x03, 0x00, KEY_R)
- MATRIX_KEY(0x03, 0x01, KEY_V)
- MATRIX_KEY(0x03, 0x02, KEY_B)
- MATRIX_KEY(0x03, 0x03, KEY_N)
- MATRIX_KEY(0x03, 0x04, KEY_M)
- MATRIX_KEY(0x03, 0x05, KEY_SPACE)
- MATRIX_KEY(0x03, 0x06, KEY_SPACE)
- MATRIX_KEY(0x03, 0x07, KEY_LEFT)
-
- MATRIX_KEY(0x04, 0x00, KEY_T)
- MATRIX_KEY(0x04, 0x01, KEY_DOWN)
- MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
- MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
- MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
- MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
- MATRIX_KEY(0x04, 0x08, KEY_F10)
-
- MATRIX_KEY(0x05, 0x00, KEY_Y)
- MATRIX_KEY(0x05, 0x08, KEY_F11)
-
- MATRIX_KEY(0x06, 0x00, KEY_U)
-
- MATRIX_KEY(0x07, 0x00, KEY_I)
- MATRIX_KEY(0x07, 0x01, KEY_F7)
- MATRIX_KEY(0x07, 0x02, KEY_F8)
- >;
-};
-
-&twl_gpio {
- ti,pullups = <0x0>;
- ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
- clock-frequency = <100000>;
-
- tlv320aic3x: tlv320aic3x@18 {
- compatible = "ti,tlv320aic3x";
- reg = <0x18>;
- reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
- ai3x-gpio-func = <
- 0 /* AIC3X_GPIO1_FUNC_DISABLED */
- 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
- >;
-
- AVDD-supply = <&vmmc2>;
- DRVDD-supply = <&vmmc2>;
- IOVDD-supply = <&vio>;
- DVDD-supply = <&vio>;
-
- ai3x-micbias-vg = <1>;
- };
-
- tlv320aic3x_aux: tlv320aic3x@19 {
- compatible = "ti,tlv320aic3x";
- reg = <0x19>;
- reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
-
- AVDD-supply = <&vmmc2>;
- DRVDD-supply = <&vmmc2>;
- IOVDD-supply = <&vio>;
- DVDD-supply = <&vio>;
-
- ai3x-micbias-vg = <2>;
- };
-
- tsl2563: tsl2563@29 {
- compatible = "amstaos,tsl2563";
- reg = <0x29>;
-
- amstaos,cover-comp-gain = <16>;
- };
-
- adp1653: led-controller@30 {
- compatible = "adi,adp1653";
- reg = <0x30>;
- enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
-
- flash {
- flash-timeout-us = <500000>;
- flash-max-microamp = <320000>;
- led-max-microamp = <50000>;
- };
- indicator {
- led-max-microamp = <17500>;
- };
- };
-
- lp5523: lp5523@32 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "national,lp5523";
- reg = <0x32>;
- clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
- enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
-
- led@0 {
- reg = <0>;
- chan-name = "lp5523:kb1";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_KBD_BACKLIGHT;
- };
-
- led@1 {
- reg = <1>;
- chan-name = "lp5523:kb2";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_KBD_BACKLIGHT;
- };
-
- led@2 {
- reg = <2>;
- chan-name = "lp5523:kb3";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_KBD_BACKLIGHT;
- };
-
- led@3 {
- reg = <3>;
- chan-name = "lp5523:kb4";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_KBD_BACKLIGHT;
- };
-
- led@4 {
- reg = <4>;
- chan-name = "lp5523:b";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
- };
-
- led@5 {
- reg = <5>;
- chan-name = "lp5523:g";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- };
-
- led@6 {
- reg = <6>;
- chan-name = "lp5523:r";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_STATUS;
- };
-
- led@7 {
- reg = <7>;
- chan-name = "lp5523:kb5";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_KBD_BACKLIGHT;
- };
-
- led@8 {
- reg = <8>;
- chan-name = "lp5523:kb6";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_KBD_BACKLIGHT;
- };
- };
-
- bq27200: bq27200@55 {
- compatible = "ti,bq27200";
- reg = <0x55>;
- power-supplies = <&bq24150a>;
- };
-
- /* Stereo headphone amplifier */
- tpa6130a2: tpa6130a2@60 {
- compatible = "ti,tpa6130a2";
- reg = <0x60>;
-
- Vdd-supply = <&vmmc2>;
-
- power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
- };
-
- si4713: si4713@63 {
- compatible = "silabs,si4713";
- reg = <0x63>;
-
- interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
- reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
- vio-supply = <&vio>;
- vdd-supply = <&vaux1>;
- };
-
- bq24150a: bq24150a@6b {
- compatible = "ti,bq24150a";
- reg = <0x6b>;
-
- ti,current-limit = <100>;
- ti,weak-battery-voltage = <3400>;
- ti,battery-regulation-voltage = <4200>;
- ti,charge-current = <650>;
- ti,termination-current = <100>;
- ti,resistor-sense = <68>;
-
- ti,usb-charger-detection = <&isp1707>;
- };
-};
-
-&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
-
- clock-frequency = <400000>;
-
- lis302dl: lis3lv02d@1d {
- compatible = "st,lis3lv02d";
- reg = <0x1d>;
-
- Vdd-supply = <&vaux1>;
- Vdd_IO-supply = <&vio>;
-
- interrupt-parent = <&gpio6>;
- interrupts = <21 20>; /* 181 and 180 */
-
- /* click flags */
- st,click-single-x;
- st,click-single-y;
- st,click-single-z;
-
- /* Limits are 0.5g * value */
- st,click-threshold-x = <8>;
- st,click-threshold-y = <8>;
- st,click-threshold-z = <10>;
-
- /* Click must be longer than time limit */
- st,click-time-limit = <9>;
-
- /* Kind of debounce filter */
- st,click-latency = <50>;
-
- /* Interrupt line 2 for click detection */
- st,irq2-click;
-
- st,wakeup-x-hi;
- st,wakeup-y-hi;
- st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
-
- st,wakeup2-z-hi;
- st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
-
- st,hipass1-disable;
- st,hipass2-disable;
-
- st,axis-x = <1>; /* LIS3_DEV_X */
- st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
- st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
-
- st,min-limit-x = <(-32)>;
- st,min-limit-y = <3>;
- st,min-limit-z = <3>;
-
- st,max-limit-x = <(-3)>;
- st,max-limit-y = <32>;
- st,max-limit-z = <32>;
- };
-
- cam1: camera@3e {
- compatible = "toshiba,et8ek8";
- reg = <0x3e>;
-
- vana-supply = <&vaux4>;
-
- clocks = <&isp 0>;
- clock-names = "extclk";
- clock-frequency = <9600000>;
-
- reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
-
- lens-focus = <&ad5820>;
-
- port {
- csi_cam1: endpoint {
- bus-type = <3>; /* CCP2 */
- strobe = <1>;
- clock-inv = <0>;
- crc = <1>;
-
- remote-endpoint = <&csi_isp>;
- };
- };
- };
-
- /* D/A converter for auto-focus */
- ad5820: dac@c {
- compatible = "adi,ad5820";
- reg = <0x0c>;
-
- VANA-supply = <&vaux4>;
-
- #io-channel-cells = <0>;
- };
-};
-
-&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- vmmc-supply = <&vmmc1>;
- bus-width = <4>;
-};
-
-/* most boards use vaux3, only some old versions use vmmc2 instead */
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <&vaux3>;
- vqmmc-supply = <&vsim>;
- bus-width = <8>;
- non-removable;
- no-sdio;
- no-sd;
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&gpmc {
- ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
- <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
- pinctrl-names = "default";
- pinctrl-0 = <&gpmc_pins>;
-
- /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
- onenand@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ti,omap2-onenand";
- reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
-
- /*
- * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
- * bootloader set values when booted with v5.1
- * (OneNAND Manufacturer: Samsung):
- *
- * cs0 GPMC_CS_CONFIG1: 0xfb001202
- * cs0 GPMC_CS_CONFIG2: 0x00111100
- * cs0 GPMC_CS_CONFIG3: 0x00020200
- * cs0 GPMC_CS_CONFIG4: 0x11001102
- * cs0 GPMC_CS_CONFIG5: 0x03101616
- * cs0 GPMC_CS_CONFIG6: 0x90060000
- */
- gpmc,sync-read;
- gpmc,sync-write;
- gpmc,burst-length = <16>;
- gpmc,burst-read;
- gpmc,burst-wrap;
- gpmc,burst-write;
- gpmc,device-width = <2>;
- gpmc,mux-add-data = <2>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <102>;
- gpmc,cs-wr-off-ns = <102>;
- gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <12>;
- gpmc,adv-wr-off-ns = <12>;
- gpmc,oe-on-ns = <12>;
- gpmc,oe-off-ns = <102>;
- gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <102>;
- gpmc,rd-cycle-ns = <132>;
- gpmc,wr-cycle-ns = <132>;
- gpmc,access-ns = <96>;
- gpmc,page-burst-access-ns = <18>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <6>;
- gpmc,wr-data-mux-bus-ns = <36>;
- gpmc,wr-access-ns = <96>;
- gpmc,sync-clk-ps = <15000>;
-
- /*
- * MTD partition table corresponding to Nokia's
- * Maemo 5 (Fremantle) release.
- */
- partition@0 {
- label = "bootloader";
- reg = <0x00000000 0x00020000>;
- read-only;
- };
- partition@1 {
- label = "config";
- reg = <0x00020000 0x00060000>;
- };
- partition@2 {
- label = "log";
- reg = <0x00080000 0x00040000>;
- };
- partition@3 {
- label = "kernel";
- reg = <0x000c0000 0x00200000>;
- };
- partition@4 {
- label = "initfs";
- reg = <0x002c0000 0x00200000>;
- };
- partition@5 {
- label = "rootfs";
- reg = <0x004c0000 0x0fb40000>;
- };
- };
-
- /* Ethernet is on some early development boards and qemu */
- ethernet@gpmc {
- compatible = "smsc,lan91c94";
- interrupt-parent = <&gpio2>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
- reg = <1 0 0xf>; /* 16 byte IO range */
- bank-width = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&ethernet_pins>;
- power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
- reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
- gpmc,device-width = <2>;
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <48>;
- gpmc,cs-wr-off-ns = <24>;
- gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <0>;
- gpmc,adv-wr-off-ns = <0>;
- gpmc,we-on-ns = <12>;
- gpmc,we-off-ns = <18>;
- gpmc,oe-on-ns = <12>;
- gpmc,oe-off-ns = <48>;
- gpmc,page-burst-access-ns = <0>;
- gpmc,access-ns = <42>;
- gpmc,rd-cycle-ns = <180>;
- gpmc,wr-cycle-ns = <180>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <0>;
- gpmc,wr-access-ns = <0>;
- gpmc,wr-data-mux-bus-ns = <12>;
- };
-};
-
-&mcspi1 {
- /*
- * For some reason, touchscreen is necessary for screen to work at
- * all on real hw. It works well without it on emulator.
- *
- * Also... order in the device tree actually matters here.
- */
- tsc2005@0 {
- compatible = "ti,tsc2005";
- spi-max-frequency = <6000000>;
- reg = <0>;
-
- vio-supply = <&vio>;
-
- reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
- interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
-
- touchscreen-fuzz-x = <4>;
- touchscreen-fuzz-y = <7>;
- touchscreen-fuzz-pressure = <2>;
- touchscreen-size-x = <4096>;
- touchscreen-size-y = <4096>;
- touchscreen-max-pressure = <2048>;
-
- ti,x-plate-ohms = <280>;
- ti,esd-recovery-timeout-ms = <8000>;
- };
-
- lcd: acx565akm@2 {
- compatible = "sony,acx565akm";
- spi-max-frequency = <6000000>;
- reg = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&acx565akm_pins>;
-
- label = "lcd";
- reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
-
- port {
- lcd_in: endpoint {
- remote-endpoint = <&sdi_out>;
- };
- };
- };
-};
-
-&mcspi4 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi4_pins>;
-
- wl1251@0 {
- pinctrl-names = "default";
- pinctrl-0 = <&wl1251_pins>;
-
- vio-supply = <&vio>;
-
- compatible = "ti,wl1251";
- reg = <0>;
- spi-max-frequency = <48000000>;
-
- spi-cpol;
- spi-cpha;
-
- ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
-
- interrupt-parent = <&gpio2>;
- interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
-
- clocks = <&vctcxo>;
- };
-};
-
-/* RNG not directly accessible on n900, see omap3-rom-rng instead */
-&rng_target {
- status = "disabled";
-};
-
-&usb_otg_hs {
- interface-type = <0>;
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- mode = <2>;
- power = <50>;
-};
-
-&uart1 {
- status = "disabled";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
-
- bcm2048: bluetooth {
- compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
- reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
- host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
- bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
- clocks = <&vctcxo>;
- clock-names = "sysclk";
- };
-};
-
-&uart3 {
- interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
-};
-
-&dss {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&dss_sdi_pins>;
-
- vdds_sdi-supply = <&vaux1>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- sdi_out: endpoint {
- remote-endpoint = <&lcd_in>;
- datapairs = <2>;
- };
- };
- };
-};
-
-&venc {
- status = "okay";
-
- vdda-supply = <&vdac>;
-
- port {
- venc_out: endpoint {
- remote-endpoint = <&tv_connector_in>;
- ti,channels = <1>;
- };
- };
-};
-
-&mcbsp2 {
- status = "okay";
-};
-
-&ssi_port1 {
- pinctrl-names = "default";
- pinctrl-0 = <&ssi_pins>;
-
- ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
-
- modem: hsi-client {
- compatible = "nokia,n900-modem";
-
- pinctrl-names = "default";
- pinctrl-0 = <&modem_pins>;
-
- hsi-channel-ids = <0>, <1>, <2>, <3>;
- hsi-channel-names = "mcsaab-control",
- "speech-control",
- "speech-data",
- "mcsaab-data";
- hsi-speed-kbps = <55000>;
- hsi-mode = "frame";
- hsi-flow = "synchronized";
- hsi-arb-mode = "round-robin";
-
- interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
-
- gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
- <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
- <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
- <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
- <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
- gpio-names = "cmt_apeslpx",
- "cmt_rst_rq",
- "cmt_en",
- "cmt_rst",
- "cmt_bsi";
- };
-};
-
-&ssi_port2 {
- status = "disabled";
-};