diff options
Diffstat (limited to 'dts/src/arm/omap3-sb-t35.dtsi')
-rw-r--r-- | dts/src/arm/omap3-sb-t35.dtsi | 138 |
1 files changed, 0 insertions, 138 deletions
diff --git a/dts/src/arm/omap3-sb-t35.dtsi b/dts/src/arm/omap3-sb-t35.dtsi deleted file mode 100644 index fb9842fa92..0000000000 --- a/dts/src/arm/omap3-sb-t35.dtsi +++ /dev/null @@ -1,138 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730 - */ - -/ { - tfp410: encoder { - compatible = "ti,tfp410"; - - powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ - - pinctrl-names = "default"; - pinctrl-0 = <&tfp410_pins>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; - }; - - dvi0: dvi-connector { - compatible = "dvi-connector"; - label = "dvi"; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; - }; - - audio_amp: audio_amp { - compatible = "regulator-fixed"; - regulator-name = "audio_amp"; - pinctrl-names = "default"; - pinctrl-0 = <&sb_t35_audio_amp>; - gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */ - regulator-always-on; - }; -}; - -&omap3_pmx_core { - smsc2_pins: pinmux_smsc2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */ - OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */ - >; - }; - - tfp410_pins: pinmux_tfp410_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ - >; - }; - - sb_t35_audio_amp: pinmux_sb_t35_audio_amp { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */ - >; - }; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - - clock-frequency = <400000>; - - at24@50 { - compatible = "atmel,24c02"; - pagesize = <16>; - reg = <0x50>; - }; -}; - -&gpmc { - ranges = <4 0 0x2d000000 0x01000000>; - - smsc2: ethernet@4,0 { - compatible = "smsc,lan9221", "smsc,lan9115"; - pinctrl-names = "default"; - pinctrl-0 = <&smsc2_pins>; - interrupt-parent = <&gpio3>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - reg = <4 0 0xff>; - bank-width = <2>; - gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; - gpmc,cs-on-ns = <5>; - gpmc,cs-rd-off-ns = <150>; - gpmc,cs-wr-off-ns = <150>; - gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <15>; - gpmc,adv-wr-off-ns = <40>; - gpmc,oe-on-ns = <45>; - gpmc,oe-off-ns = <140>; - gpmc,we-on-ns = <45>; - gpmc,we-off-ns = <140>; - gpmc,rd-cycle-ns = <155>; - gpmc,wr-cycle-ns = <155>; - gpmc,access-ns = <120>; - gpmc,page-burst-access-ns = <20>; - gpmc,bus-turnaround-ns = <75>; - gpmc,cycle2cycle-delay-ns = <75>; - gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-data-mux-bus-ns = <0>; - gpmc,wr-access-ns = <0>; - vddvario-supply = <&vddvario>; - vdd33a-supply = <&vdd33a>; - reg-io-width = <4>; - smsc,save-mac-address; - }; -}; |