1 files changed, 0 insertions, 138 deletions
diff --git a/dts/src/arm/omap3-sb-t35.dtsi b/dts/src/arm/omap3-sb-t35.dtsi
deleted file mode 100644
index fb9842fa92..0000000000
--- a/dts/src/arm/omap3-sb-t35.dtsi
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
- */
-
-/ {
-	tfp410: encoder {
-		compatible = "ti,tfp410";
-
-		powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;  /* gpio_54 */
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tfp410_pins>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: dvi-connector {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	audio_amp: audio_amp {
-		compatible = "regulator-fixed";
-		regulator-name = "audio_amp";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sb_t35_audio_amp>;
-		gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;   /* gpio_61 */
-		regulator-always-on;
-	};
-};
-
-&omap3_pmx_core {
-	smsc2_pins: pinmux_smsc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs4.gpmc_ncs4 */
-			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
-		>;
-	};
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
-		>;
-	};
-
-	sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
-		>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "atmel,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
-
-&gpmc {
-	ranges = <4 0 0x2d000000 0x01000000>;
-
-	smsc2: ethernet@4,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc2_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		reg = <4 0 0xff>;
-		bank-width = <2>;
-		gpmc,device-width = <1>;
-		gpmc,cycle2cycle-samecsen = <1>;
-		gpmc,cycle2cycle-diffcsen = <1>;
-		gpmc,cs-on-ns = <5>;
-		gpmc,cs-rd-off-ns = <150>;
-		gpmc,cs-wr-off-ns = <150>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <15>;
-		gpmc,adv-wr-off-ns = <40>;
-		gpmc,oe-on-ns = <45>;
-		gpmc,oe-off-ns = <140>;
-		gpmc,we-on-ns = <45>;
-		gpmc,we-off-ns = <140>;
-		gpmc,rd-cycle-ns = <155>;
-		gpmc,wr-cycle-ns = <155>;
-		gpmc,access-ns = <120>;
-		gpmc,page-burst-access-ns = <20>;
-		gpmc,bus-turnaround-ns = <75>;
-		gpmc,cycle2cycle-delay-ns = <75>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,wr-access-ns = <0>;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};