diff options
Diffstat (limited to 'dts/src/arm/omap4.dtsi')
-rw-r--r-- | dts/src/arm/omap4.dtsi | 532 |
1 files changed, 0 insertions, 532 deletions
diff --git a/dts/src/arm/omap4.dtsi b/dts/src/arm/omap4.dtsi deleted file mode 100644 index 9a87440d0b..0000000000 --- a/dts/src/arm/omap4.dtsi +++ /dev/null @@ -1,532 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - */ - -#include <dt-bindings/bus/ti-sysc.h> -#include <dt-bindings/clock/omap4.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/omap.h> -#include <dt-bindings/clock/omap4.h> - -/ { - compatible = "ti,omap4430", "ti,omap4"; - interrupt-parent = <&wakeupgen>; - #address-cells = <1>; - #size-cells = <1>; - chosen { }; - - aliases { - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - i2c3 = &i2c4; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a9"; - device_type = "cpu"; - next-level-cache = <&L2>; - reg = <0x0>; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; - cpu@1 { - compatible = "arm,cortex-a9"; - device_type = "cpu"; - next-level-cache = <&L2>; - reg = <0x1>; - }; - }; - - /* - * Note that 4430 needs cross trigger interface (CTI) supported - * before we can configure the interrupts. This means sampling - * events are not supported for pmu. Note that 4460 does not use - * CTI, see also 4460.dtsi. - */ - pmu { - compatible = "arm,cortex-a9-pmu"; - ti,hwmods = "debugss"; - }; - - gic: interrupt-controller@48241000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48241000 0x1000>, - <0x48240100 0x0100>; - interrupt-parent = <&gic>; - }; - - L2: l2-cache-controller@48242000 { - compatible = "arm,pl310-cache"; - reg = <0x48242000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - local-timer@48240600 { - compatible = "arm,cortex-a9-twd-timer"; - clocks = <&mpu_periphclk>; - reg = <0x48240600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>; - interrupt-parent = <&gic>; - }; - - wakeupgen: interrupt-controller@48281000 { - compatible = "ti,omap4-wugen-mpu"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48281000 0x1000>; - interrupt-parent = <&gic>; - }; - - /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap4-mpu"; - ti,hwmods = "mpu"; - sram = <&ocmcram>; - }; - - dsp { - compatible = "ti,omap3-c64"; - ti,hwmods = "dsp"; - }; - - iva { - compatible = "ti,ivahd"; - ti,hwmods = "iva"; - }; - }; - - /* - * XXX: Use a flat representation of the OMAP4 interconnect. - * The real OMAP interconnect network is quite complex. - * Since it will not bring real advantage to represent that in DT for - * the moment, just use a fake OCP bus entry to represent the whole bus - * hierarchy. - */ - ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - reg = <0x44000000 0x1000>, - <0x44800000 0x2000>, - <0x45000000 0x1000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - - l4_wkup: interconnect@4a300000 { - }; - - l4_cfg: interconnect@4a000000 { - }; - - l4_per: interconnect@48000000 { - }; - - l4_abe: interconnect@40100000 { - }; - - ocmcram: sram@40304000 { - compatible = "mmio-sram"; - reg = <0x40304000 0xa000>; /* 40k */ - }; - - gpmc: gpmc@50000000 { - compatible = "ti,omap4430-gpmc"; - reg = <0x50000000 0x1000>; - #address-cells = <2>; - #size-cells = <1>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 4>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - ti,hwmods = "gpmc"; - ti,no-idle-on-init; - clocks = <&l3_div_ck>; - clock-names = "fck"; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - - target-module@52000000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "iss"; - reg = <0x52000000 0x4>, - <0x52000010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,sysc-delay-us = <2>; - clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x52000000 0x1000000>; - - /* No child device binding, driver in staging */ - }; - - target-module@55082000 { - compatible = "ti,sysc-omap2", "ti,sysc"; - reg = <0x55082000 0x4>, - <0x55082010 0x4>, - <0x55082014 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | - SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; - clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>; - clock-names = "fck"; - resets = <&prm_core 2>; - reset-names = "rstctrl"; - ranges = <0x0 0x55082000 0x100>; - #size-cells = <1>; - #address-cells = <1>; - - mmu_ipu: mmu@0 { - compatible = "ti,omap4-iommu"; - reg = <0x0 0x100>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <0>; - ti,iommu-bus-err-back; - }; - }; - - target-module@4012c000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x4012c000 0x4>, - <0x4012c010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */ - <0x4902c000 0x4902c000 0x1000>; /* L3 */ - - /* No child device binding or driver in mainline */ - }; - - dmm@4e000000 { - compatible = "ti,omap4-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; - ti,hwmods = "dmm"; - }; - - emif1: emif@4c000000 { - compatible = "ti,emif-4d"; - reg = <0x4c000000 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "emif1"; - ti,no-idle-on-init; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; - }; - - emif2: emif@4d000000 { - compatible = "ti,emif-4d"; - reg = <0x4d000000 0x100>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "emif2"; - ti,no-idle-on-init; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; - }; - - aes1_target: target-module@4b501000 { - compatible = "ti,sysc-omap2", "ti,sysc"; - reg = <0x4b501080 0x4>, - <0x4b501084 0x4>, - <0x4b501088 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,syss-mask = <1>; - /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ - clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x4b501000 0x1000>; - - aes1: aes@0 { - compatible = "ti,omap4-aes"; - reg = <0 0xa0>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 111>, <&sdma 110>; - dma-names = "tx", "rx"; - }; - }; - - aes2_target: target-module@4b701000 { - compatible = "ti,sysc-omap2", "ti,sysc"; - reg = <0x4b701080 0x4>, - <0x4b701084 0x4>, - <0x4b701088 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,syss-mask = <1>; - /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ - clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x4b701000 0x1000>; - - aes2: aes@0 { - compatible = "ti,omap4-aes"; - reg = <0 0xa0>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 114>, <&sdma 113>; - dma-names = "tx", "rx"; - }; - }; - - sham_target: target-module@4b100000 { - compatible = "ti,sysc-omap3-sham", "ti,sysc"; - reg = <0x4b100100 0x4>, - <0x4b100110 0x4>, - <0x4b100114 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,syss-mask = <1>; - /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ - clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x4b100000 0x1000>; - - sham: sham@0 { - compatible = "ti,omap4-sham"; - reg = <0 0x300>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 119>; - dma-names = "rx"; - }; - }; - - abb_mpu: regulator-abb-mpu { - compatible = "ti,abb-v2"; - regulator-name = "abb_mpu"; - #address-cells = <0>; - #size-cells = <0>; - ti,tranxdone-status-mask = <0x80>; - clocks = <&sys_clkin_ck>; - ti,settling-time = <50>; - ti,clock-cycles = <16>; - - status = "disabled"; - }; - - abb_iva: regulator-abb-iva { - compatible = "ti,abb-v2"; - regulator-name = "abb_iva"; - #address-cells = <0>; - #size-cells = <0>; - ti,tranxdone-status-mask = <0x80000000>; - clocks = <&sys_clkin_ck>; - ti,settling-time = <50>; - ti,clock-cycles = <16>; - - status = "disabled"; - }; - - target-module@56000000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x5600fe00 0x4>, - <0x5600fe10 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x56000000 0x2000000>; - - /* - * Closed source PowerVR driver, no child device - * binding or driver in mainline - */ - }; - - dss: dss@58000000 { - compatible = "ti,omap4-dss"; - reg = <0x58000000 0x80>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dispc@58001000 { - compatible = "ti,omap4-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; - }; - - rfbi: encoder@58002000 { - compatible = "ti,omap4-rfbi"; - reg = <0x58002000 0x1000>; - status = "disabled"; - ti,hwmods = "dss_rfbi"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>; - clock-names = "fck", "ick"; - }; - - venc: encoder@58003000 { - compatible = "ti,omap4-venc"; - reg = <0x58003000 0x1000>; - status = "disabled"; - ti,hwmods = "dss_venc"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; - clock-names = "fck"; - }; - - dsi1: encoder@58004000 { - compatible = "ti,omap4-dsi"; - reg = <0x58004000 0x200>, - <0x58004200 0x40>, - <0x58004300 0x20>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi1"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - dsi2: encoder@58005000 { - compatible = "ti,omap4-dsi"; - reg = <0x58005000 0x200>, - <0x58005200 0x40>, - <0x58005300 0x20>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi2"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - hdmi: encoder@58006000 { - compatible = "ti,omap4-hdmi"; - reg = <0x58006000 0x200>, - <0x58006200 0x100>, - <0x58006300 0x100>, - <0x58006400 0x1000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma 76>; - dma-names = "audio_tx"; - }; - }; - }; -}; - -#include "omap4-l4.dtsi" -#include "omap4-l4-abe.dtsi" -#include "omap44xx-clocks.dtsi" - -&prm { - prm_tesla: prm@400 { - compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; - reg = <0x400 0x100>; - #reset-cells = <1>; - }; - - prm_core: prm@700 { - compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; - reg = <0x700 0x100>; - #reset-cells = <1>; - }; - - prm_ivahd: prm@f00 { - compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; - reg = <0xf00 0x100>; - #reset-cells = <1>; - }; - - prm_device: prm@1b00 { - compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; - reg = <0x1b00 0x40>; - #reset-cells = <1>; - }; -}; |