summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/omap4.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/omap4.dtsi')
-rw-r--r--dts/src/arm/omap4.dtsi169
1 files changed, 112 insertions, 57 deletions
diff --git a/dts/src/arm/omap4.dtsi b/dts/src/arm/omap4.dtsi
index 4a9f9496a8..2bbff9032b 100644
--- a/dts/src/arm/omap4.dtsi
+++ b/dts/src/arm/omap4.dtsi
@@ -59,14 +59,12 @@
};
/*
- * Note that 4430 needs cross trigger interface (CTI) supported
- * before we can configure the interrupts. This means sampling
- * events are not supported for pmu. Note that 4460 does not use
- * CTI, see also 4460.dtsi.
+ * Needed early by omap4_sram_init() for barrier, do not move to l3
+ * interconnect as simple-pm-bus probes at module_init() time.
*/
- pmu {
- compatible = "arm,cortex-a9-pmu";
- ti,hwmods = "debugss";
+ ocmcram: sram@40304000 {
+ compatible = "mmio-sram";
+ reg = <0x40304000 0xa000>; /* 40k */
};
gic: interrupt-controller@48241000 {
@@ -102,19 +100,6 @@
};
/*
- * The soc node represents the soc top level view. It is used for IPs
- * that are not memory mapped in the MPU view or for the MPU itself.
- */
- soc {
- compatible = "ti,omap-infra";
- mpu {
- compatible = "ti,omap4-mpu";
- ti,hwmods = "mpu";
- sram = <&ocmcram>;
- };
- };
-
- /*
* XXX: Use a flat representation of the OMAP4 interconnect.
* The real OMAP interconnect network is quite complex.
* Since it will not bring real advantage to represent that in DT for
@@ -122,16 +107,23 @@
* hierarchy.
*/
ocp {
- compatible = "ti,omap4-l3-noc", "simple-bus";
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l3_1_clkctrl OMAP4_L3_MAIN_1_CLKCTRL 0>,
+ <&l3_2_clkctrl OMAP4_L3_MAIN_2_CLKCTRL 0>,
+ <&l3_instr_clkctrl OMAP4_L3_MAIN_3_CLKCTRL 0>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
- reg = <0x44000000 0x1000>,
- <0x44800000 0x2000>,
- <0x45000000 0x1000>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ l3-noc@44000000 {
+ compatible = "ti,omap4-l3-noc";
+ reg = <0x44000000 0x1000>,
+ <0x44800000 0x2000>,
+ <0x45000000 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
l4_wkup: interconnect@4a300000 {
};
@@ -142,12 +134,22 @@
l4_per: interconnect@48000000 {
};
- l4_abe: interconnect@40100000 {
+ target-module@48210000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpuss_clkctrl OMAP4_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48210000 0x1f0000>;
+
+ mpu {
+ compatible = "ti,omap4-mpu";
+ sram = <&ocmcram>;
+ };
};
- ocmcram: sram@40304000 {
- compatible = "mmio-sram";
- reg = <0x40304000 0xa000>; /* 40k */
+ l4_abe: interconnect@40100000 {
};
target-module@50000000 {
@@ -189,7 +191,6 @@
target-module@52000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "iss";
reg = <0x52000000 0x4>,
<0x52000010 0x4>;
reg-names = "rev", "sysc";
@@ -203,6 +204,7 @@
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
ti,sysc-delay-us = <2>;
+ power-domains = <&prm_cam>;
clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
@@ -212,6 +214,26 @@
/* No child device binding, driver in staging */
};
+ /*
+ * Note that 4430 needs cross trigger interface (CTI) supported
+ * before we can configure the interrupts. This means sampling
+ * events are not supported for pmu. Note that 4460 does not use
+ * CTI, see also 4460.dtsi.
+ */
+ target-module@54000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_emu>;
+ clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x54000000 0x1000000>;
+
+ pmu: pmu {
+ compatible = "arm,cortex-a9-pmu";
+ };
+ };
+
target-module@55082000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x55082000 0x4>,
@@ -261,35 +283,67 @@
/* No child device binding or driver in mainline */
};
- dmm@4e000000 {
- compatible = "ti,omap4-dmm";
- reg = <0x4e000000 0x800>;
- interrupts = <0 113 0x4>;
- ti,hwmods = "dmm";
+ target-module@4e000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4e000000 0x4>,
+ <0x4e000010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ranges = <0x0 0x4e000000 0x2000000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ dmm@0 {
+ compatible = "ti,omap4-dmm";
+ reg = <0 0x800>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- emif1: emif@4c000000 {
- compatible = "ti,emif-4d";
- reg = <0x4c000000 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "emif1";
- ti,no-idle-on-init;
- phy-type = <1>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4c000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4c000000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_emif_clkctrl OMAP4_EMIF1_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000000 0x1000000>;
+
+ emif1: emif@0 {
+ compatible = "ti,emif-4d";
+ reg = <0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
- emif2: emif@4d000000 {
- compatible = "ti,emif-4d";
- reg = <0x4d000000 0x100>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "emif2";
- ti,no-idle-on-init;
- phy-type = <1>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4d000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4d000000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_emif_clkctrl OMAP4_EMIF2_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000000 0x1000000>;
+
+ emif2: emif@0 {
+ compatible = "ti,emif-4d";
+ reg = <0 0x100>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
dsp: dsp {
@@ -440,6 +494,7 @@
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
+ power-domains = <&prm_gfx>;
clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-02 10:36:42 +0000