summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/orion5x-lacie-d2-network.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/orion5x-lacie-d2-network.dts')
-rw-r--r--dts/src/arm/orion5x-lacie-d2-network.dts237
1 files changed, 0 insertions, 237 deletions
diff --git a/dts/src/arm/orion5x-lacie-d2-network.dts b/dts/src/arm/orion5x-lacie-d2-network.dts
deleted file mode 100644
index 422958d13d..0000000000
--- a/dts/src/arm/orion5x-lacie-d2-network.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
- model = "LaCie d2 Network";
- compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x4000000>; /* 64 MB */
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
- <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
- <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- front_button {
- label = "Front Push Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- };
-
- power_rocker_sw_on {
- label = "Power rocker switch (on|auto)";
- linux,input-type = <5>; /* EV_SW */
- linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
-
- power_rocker_sw_off {
- label = "Power rocker switch (auto|off)";
- linux,input-type = <5>; /* EV_SW */
- linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
- pinctrl-names = "default";
-
- sata0_power: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "SATA0 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
- };
-
- sata1_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "SATA1 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&devbus_bootcs {
- status = "okay";
-
- devbus,keep-config;
-
- /*
- * Currently the MTD code does not recognize the MX29LV400CBCT
- * as a bottom-type device. This could cause risks of
- * accidentally erasing critical flash sectors. We thus define
- * a single, write-protected partition covering the whole
- * flash. TODO: once the flash part TOP/BOTTOM detection
- * issue is sorted out in the MTD code, break this into at
- * least three partitions: 'u-boot code', 'u-boot environment'
- * and 'whatever is left'.
- */
- flash@0 {
- compatible = "cfi-flash";
- reg = <0 0x80000>;
- bank-width = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "Full512Kb";
- reg = <0 0x80000>;
- read-only;
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy: ethernet-phy {
- reg = <8>;
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&eth {
- status = "okay";
-
- ethernet-port@0 {
- phy-handle = <&ethphy>;
- };
-};
-
-&i2c {
- status = "okay";
- clock-frequency = <100000>;
- #address-cells = <1>;
-
- rtc@32 {
- compatible = "ricoh,rs5c372b";
- reg = <0x32>;
- };
-
- fan@3e {
- compatible = "gmt,g762";
- reg = <0x3e>;
-
- /* Not enough HW info */
- status = "disabled";
- };
-
- eeprom@50 {
- compatible = "atmel,24c08";
- reg = <0x50>;
- };
-};
-
-&pinctrl {
- pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
- pinctrl-names = "default";
-
- pmx_board_id: pmx-board-id {
- marvell,pins = "mpp0", "mpp1", "mpp2";
- marvell,function = "gpio";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp8", "mpp9", "mpp18";
- marvell,function = "gpio";
- };
-
- pmx_fan_fail: pmx-fan-fail {
- marvell,pins = "mpp5";
- marvell,function = "gpio";
- };
-
- /*
- * MPP6: Red front LED
- * MPP16: Blue front LED blink control
- */
- pmx_leds: pmx-leds {
- marvell,pins = "mpp6", "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_sata0_led_active: pmx-sata0-led-active {
- marvell,pins = "mpp14";
- marvell,function = "sata0";
- };
-
- pmx_sata0_power: pmx-sata0-power {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
-
- pmx_sata1_led_active: pmx-sata1-led-active {
- marvell,pins = "mpp15";
- marvell,function = "sata1";
- };
-
- pmx_sata1_power: pmx-sata1-power {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-
- /*
- * Non MPP GPIOs:
- * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
- * GPIO 23: Blue front LED off
- * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
- */
-};
-
-&sata {
- pinctrl-0 = <&pmx_sata0_led_active
- &pmx_sata1_led_active>;
- pinctrl-names = "default";
- status = "okay";
- nr-ports = <2>;
-};
-
-&uart0 {
- status = "okay";
-};