1 files changed, 0 insertions, 175 deletions
diff --git a/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts b/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts
deleted file mode 100644
index 0043e00401..0000000000
--- a/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "LaCie Ethernet Disk mini V2";
-	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_power_button>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@1 {
-			label = "Power-on Switch";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_power_led>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "power:blue";
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Full512Kb";
-			reg = <0 0x80000>;
-			read-only;
-		};
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372a";
-		reg = <0x32>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
-	pinctrl-names = "default";
-
-	pmx_power_button: pmx-power-button {
-		marvell,pins = "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_led: pmx-power-led {
-		marvell,pins = "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_led_ctrl: pmx-power-led-ctrl {
-		marvell,pins = "mpp17";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};