diff options
Diffstat (limited to 'dts/src/arm/orion5x-maxtor-shared-storage-2.dts')
-rw-r--r-- | dts/src/arm/orion5x-maxtor-shared-storage-2.dts | 179 |
1 files changed, 0 insertions, 179 deletions
diff --git a/dts/src/arm/orion5x-maxtor-shared-storage-2.dts b/dts/src/arm/orion5x-maxtor-shared-storage-2.dts deleted file mode 100644 index 0ca6208a26..0000000000 --- a/dts/src/arm/orion5x-maxtor-shared-storage-2.dts +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include "orion5x-mv88f5182.dtsi" - -/ { - model = "Maxtor Shared Storage II"; - compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x4000000>; /* 64 MB */ - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, - <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, - <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - power { - label = "Power"; - linux,code = <KEY_POWER>; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "Reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&devbus_bootcs { - status = "okay"; - - devbus,keep-config; - - /* - * Currently the MTD code does not recognize the MX29LV400CBCT - * as a bottom-type device. This could cause risks of - * accidentally erasing critical flash sectors. We thus define - * a single, write-protected partition covering the whole - * flash. TODO: once the flash part TOP/BOTTOM detection - * issue is sorted out in the MTD code, break this into at - * least three partitions: 'u-boot code', 'u-boot environment' - * and 'whatever is left'. - */ - flash@0 { - compatible = "cfi-flash"; - reg = <0 0x40000>; - bank-width = <1>; - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&mdio { - status = "okay"; - - ethphy: ethernet-phy { - reg = <8>; - }; -}; - -&ehci0 { - status = "okay"; -}; - -ð { - status = "okay"; - - ethernet-port@0 { - phy-handle = <ðphy>; - }; -}; - -&i2c { - status = "okay"; - clock-frequency = <100000>; - #address-cells = <1>; - - rtc@68 { - compatible = "st,m41t81"; - reg = <0x68>; - pinctrl-0 = <&pmx_rtc>; - pinctrl-names = "default"; - interrupt-parent = <&gpio0>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&pinctrl { - pinctrl-0 = <&pmx_leds &pmx_misc>; - pinctrl-names = "default"; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp11", "mpp12"; - marvell,function = "gpio"; - }; - - /* - * MPP0: Power LED - * MPP1: Error LED - */ - pmx_leds: pmx-leds { - marvell,pins = "mpp0", "mpp1"; - marvell,function = "gpio"; - }; - - /* - * MPP4: HDD ind. (Single/Dual) - * MPP5: HD0 5V control - * MPP6: HD0 12V control - * MPP7: HD1 5V control - * MPP8: HD1 12V control - */ - pmx_misc: pmx-misc { - marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10"; - marvell,function = "gpio"; - }; - - pmx_rtc: pmx-rtc { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - - pmx_sata0_led_active: pmx-sata0-led-active { - marvell,pins = "mpp14"; - marvell,function = "sata0"; - }; - - pmx_sata1_led_active: pmx-sata1-led-active { - marvell,pins = "mpp15"; - marvell,function = "sata1"; - }; - - /* - * Non MPP GPIOs: - * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) - * GPIO 23: Blue front LED off - * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) - */ -}; - -&sata { - pinctrl-0 = <&pmx_sata0_led_active - &pmx_sata1_led_active>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <2>; -}; - -&uart0 { - status = "okay"; -}; |