diff options
Diffstat (limited to 'dts/src/arm/pxa300-raumfeld-common.dtsi')
-rw-r--r-- | dts/src/arm/pxa300-raumfeld-common.dtsi | 405 |
1 files changed, 0 insertions, 405 deletions
diff --git a/dts/src/arm/pxa300-raumfeld-common.dtsi b/dts/src/arm/pxa300-raumfeld-common.dtsi deleted file mode 100644 index 8a6721d436..0000000000 --- a/dts/src/arm/pxa300-raumfeld-common.dtsi +++ /dev/null @@ -1,405 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include "pxa3xx.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - /* Will be overridden by bootloader */ - hw-revision = <0>; - - chosen { - bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3"; - stdout-path = &ffuart; - }; - - memory { - device_type = "memory"; - reg = <0xa0000000 0x8000000>; /* 128 MB */ - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3-fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_1v8: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "1v8-fixed-supply"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_va_5v0: regulator-va-5v0 { - compatible = "regulator-fixed"; - regulator-name = "va-5v0-fixed-supply"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio 124 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - ssp_dai0: ssp-dai0 { - compatible = "mrvl,pxa-ssp-dai"; - pinctrl-names = "default"; - pinctrl-0 = <&ssp0_dai_pins>; - port = <&ssp1>; - #sound-dai-cells = <0>; - dmas = <&pdma 13 3 - &pdma 14 3>; - dma-names = "rx", "tx"; - clock-names = "extclk"; - }; - - ssp_dai1: ssp-dai1 { - compatible = "mrvl,pxa-ssp-dai"; - pinctrl-names = "default"; - pinctrl-0 = <&ssp1_dai_pins>; - port = <&ssp2>; - #sound-dai-cells = <0>; - dmas = <&pdma 15 3 - &pdma 16 3>; - dma-names = "rx", "tx"; - clock-names = "extclk"; - }; - - spi: spi { - compatible = "spi-gpio"; - #address-cells = <0x1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi_pins>; - gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>; - cs-gpios = < - &gpio 34 GPIO_ACTIVE_HIGH - &gpio 125 GPIO_ACTIVE_HIGH - &gpio 96 GPIO_ACTIVE_HIGH - >; - num-chipselects = <3>; - - dac: dac@2 { - compatible = "ti,dac7512"; - reg = <2>; - spi-max-frequency = <1000000>; - vcc-supply = <®_3v3>; - }; - }; - - keys: gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - - on-off { - label = "on_off button"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - linux,code = <KEY_F6>; - }; - - rescue-boot { - label = "rescue boot button"; - gpios = <&gpio 115 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_F4>; - }; - - setup { - label = "setup"; - gpios = <&gpio 119 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_F3>; - }; - }; - - rotary: rotary-encoder { - compatible = "rotary-encoder"; - gpios = < - &gpio 19 GPIO_ACTIVE_LOW - &gpio 20 GPIO_ACTIVE_HIGH - >; - linux,axis = <REL_X>; - rotary-encoder,relative-axis; - }; - - leds: leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_a &led_pins_b>; - - left { - label = "raumfeld:1"; - gpios = <&gpio 36 GPIO_ACTIVE_LOW>; - }; - - right { - label = "raumfeld:2"; - gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; - }; - }; - - poweroff { - compatible = "gpio-poweroff"; - pinctrl-names = "default"; - pinctrl-0 = <&poweroff_pins>; - gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - }; - - mmc0_pwrseq: mmc-pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pwrseq_pins>; - reset-gpios = < - &gpio 113 GPIO_ACTIVE_LOW /* W2W_RESET */ - &gpio 114 GPIO_ACTIVE_LOW /* W2W_PDN */ - >; - }; - - ethernet: ethernet@10000000 { - compatible = "smsc,lan9115"; - pinctrl-names = "default"; - pinctrl-0 = <&smsc_pins &smsc_bus_pins>; - reg = <0x10000000 0x100000>; - phy-mode = "mii"; - interrupt-parent = <&gpio>; - interrupts = <40 IRQ_TYPE_EDGE_FALLING>; - vdd33a-supply = <®_3v3>; - vddvario-supply = <®_1v8>; - reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>; - reg-io-width = <4>; - smsc,save-mac-address; - smsc,irq-push-pull; - }; -}; - -&ffuart { - status = "okay"; -}; - -&pwri2c { - status = "okay"; - - max8660: regulator@34 { - compatible = "maxim,max8660"; - reg = <0x34>; - - regulators { - regulator-v3 { - regulator-compatible= "V3(DCDC)"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1800000>; - }; - - regulator-v4 { - regulator-compatible= "V4(DCDC)"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1800000>; - }; - - regulator-v5 { - regulator-compatible= "V5(LDO)"; - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <2000000>; - }; - - reg_vcc_sdio: regulator-v6 { - regulator-compatible= "V6(LDO)"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - regulator-v7 { - regulator-compatible= "V7(LDO)"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; -}; - -&pxai2c1 { - status = "okay"; - mrvl,i2c-fast-mode; - pinctrl-names = "default"; - pinctrl-0 = <&pxai2c1_pins>; -}; - -&ssp1 { - status = "okay"; -}; - -&ssp2 { - status = "okay"; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - nand-rb = <0>; - nand-ecc-mode = "hw"; - marvell,nand-keep-config; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Bootloader"; - reg = <0x0000000 0xa0000>; - read-only; - }; - - partition@a0000 { - label = "BootloaderEnvironment"; - reg = <0x0a0000 0x20000>; - }; - - partition@c0000 { - label = "BootloaderSplashScreen"; - reg = <0x0c0000 0x60000>; - }; - - partition@120000 { - label = "UBI"; - reg = <0x120000 0x7ee0000>; - }; - }; - }; -}; - -&usb0 { - status = "okay"; - marvell,enable-port1; - marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */ - pinctrl-names = "default"; - pinctrl-0 = <&pxa3xx_ohci_pins>; -}; - -&mmc0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - pxa-mmc,detect-delay-ms = <200>; - vmmc-supply = <®_vcc_sdio>; - mmc-pwrseq = <&mmc0_pwrseq>; - non-removable; - bus-width = <4>; -}; - -&pinctrl { - poweroff_pins: poweroff-pins { - pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); - }; - - led_pins_a: led-pins-a { - pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); - }; - - led_pins_b: led-pins-b { - pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH); - }; - - pxai2c1_pins: pxai2c1-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300(21) MFP_AF1 /* I2C_SCL */ - MFP_PIN_PXA300(22) MFP_AF1 /* I2C_SDA */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); - }; - - gpio_keys_pins: gpio-keys-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300(14) MFP_AF0 /* on-off */ - MFP_PIN_PXA300(115) MFP_AF0 /* rescue boot */ - MFP_PIN_PXA300(119) MFP_AF0 /* setup */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); - }; - - spi_pins: spi-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300(95) MFP_AF0 /* SCK */ - MFP_PIN_PXA300(97) MFP_AF0 /* MOSI */ - MFP_PIN_PXA300(98) MFP_AF0 /* MISO */ - MFP_PIN_PXA300(34) MFP_AF0 /* CS#0 */ - MFP_PIN_PXA300(125) MFP_AF0 /* CS#1 */ - MFP_PIN_PXA300(96) MFP_AF0 /* CS#2 */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); - }; - - pxa3xx_ohci_pins: pxa3xx-ohci-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300_2(0) MFP_AF1 /* USBHPEN */ - MFP_PIN_PXA300_2(1) MFP_AF1 /* USBHPWR */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); - }; - - smsc_pins: smsc-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300(39) MFP_AF0 /* RESET */ - MFP_PIN_PXA300(40) MFP_AF0 /* IRQ */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); - }; - - smsc_bus_pins: smsc-bus-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300(1) MFP_AF1 /* nCS2 */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); - }; - - mmc0_pins: mmc0-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300(3) MFP_AF4 /* MMC1_DAT0 */ - MFP_PIN_PXA300(4) MFP_AF4 /* MMC1_DAT1 */ - MFP_PIN_PXA300(5) MFP_AF4 /* MMC1_DAT2 */ - MFP_PIN_PXA300(6) MFP_AF4 /* MMC1_DAT3 */ - MFP_PIN_PXA300(7) MFP_AF4 /* MMC1_CLK */ - MFP_PIN_PXA300(8) MFP_AF4 /* MMC1_CMD */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH); - }; - - mmc0_pwrseq_pins: mmc0-pwrseq-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300(113) MFP_AF0 /* W2W_RESET */ - MFP_PIN_PXA300(114) MFP_AF0 /* W2W_PDN */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); - }; - - ssp0_dai_pins: ssp0-dai-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300(85) MFP_AF1 /* SSP1_SCLK */ - MFP_PIN_PXA300(86) MFP_AF1 /* SSP1_FRM */ - MFP_PIN_PXA300(87) MFP_AF1 /* SSP1_TXD */ - MFP_PIN_PXA300(88) MFP_AF1 /* SSP1_RXD */ - MFP_PIN_PXA300(89) MFP_AF1 /* SSP1_EXTCLK */ - MFP_PIN_PXA300(90) MFP_AF1 /* SSP1_SYSCLK */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); - }; - - ssp1_dai_pins: ssp1-dai-pins { - pinctrl-single,pins = < - MFP_PIN_PXA300(25) MFP_AF2 /* SSP2_SCLK */ - MFP_PIN_PXA300(26) MFP_AF2 /* SSP2_FRM */ - MFP_PIN_PXA300(27) MFP_AF2 /* SSP2_TXD */ - MFP_PIN_PXA300(29) MFP_AF2 /* SSP2_EXTCLK */ - >; - pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); - }; -}; |