diff options
Diffstat (limited to 'dts/src/arm/qcom-apq8026-lg-lenok.dts')
-rw-r--r-- | dts/src/arm/qcom-apq8026-lg-lenok.dts | 335 |
1 files changed, 0 insertions, 335 deletions
diff --git a/dts/src/arm/qcom-apq8026-lg-lenok.dts b/dts/src/arm/qcom-apq8026-lg-lenok.dts deleted file mode 100644 index 2b7e52fda6..0000000000 --- a/dts/src/arm/qcom-apq8026-lg-lenok.dts +++ /dev/null @@ -1,335 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> - */ - -/dts-v1/; - -#include "qcom-msm8226.dtsi" -#include "qcom-pm8226.dtsi" - -/ { - model = "LG G Watch R"; - compatible = "lg,lenok", "qcom,apq8026"; - qcom,board-id = <132 0x0a>; - qcom,msm-id = <199 0x20000>; - - aliases { - serial0 = &blsp1_uart3; - serial1 = &blsp1_uart4; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_regulator_default_state>; - }; -}; - -&blsp1_i2c1 { - status = "okay"; - - fuel-gauge@55 { - compatible = "ti,bq27421"; - reg = <0x55>; - }; -}; - -&blsp1_i2c5 { - status = "okay"; - clock-frequency = <384000>; - - touchscreen@20 { - compatible = "syna,rmi4-i2c"; - reg = <0x20>; - - interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8226_l15>; - vio-supply = <&pm8226_l22>; - - pinctrl-names = "default"; - pinctrl-0 = <&touch_pins>; - - #address-cells = <1>; - #size-cells = <0>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; - }; -}; - -&blsp1_uart3 { - status = "okay"; -}; - -&blsp1_uart4 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart4_default_state>; - - bluetooth { - compatible = "brcm,bcm43430a0-bt"; - - max-speed = <3000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&bluetooth_default_state>; - - host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; -}; - -&rpm_requests { - pm8226-regulators { - compatible = "qcom,rpm-pm8226-regulators"; - - pm8226_s3: s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - }; - pm8226_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2200000>; - }; - pm8226_s5: s5 { - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - - pm8226_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - pm8226_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - pm8226_l3: l3 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1337500>; - }; - pm8226_l4: l4 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - pm8226_l5: l5 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - pm8226_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - pm8226_l7: l7 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; - }; - pm8226_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - pm8226_l9: l9 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - pm8226_l10: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - pm8226_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - pm8226_l14: l14 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <2750000>; - }; - pm8226_l15: l15 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - pm8226_l16: l16 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3350000>; - }; - pm8226_l17: l17 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - pm8226_l18: l18 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - pm8226_l19: l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - pm8226_l20: l20 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - pm8226_l21: l21 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - pm8226_l22: l22 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - pm8226_l23: l23 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - pm8226_l24: l24 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - pm8226_l25: l25 { - regulator-min-microvolt = <1775000>; - regulator-max-microvolt = <2125000>; - }; - pm8226_l26: l26 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - pm8226_l27: l27 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - pm8226_l28: l28 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3000000>; - }; - - pm8226_lvs1: lvs1 {}; - }; -}; - -&sdhc_1 { - status = "okay"; - - vmmc-supply = <&pm8226_l17>; - vqmmc-supply = <&pm8226_l6>; - - bus-width = <8>; - non-removable; -}; - -&sdhc_3 { - status = "okay"; - - max-frequency = <100000000>; - non-removable; - - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pm8226_l6>; - - #address-cells = <1>; - #size-cells = <0>; - - wifi@1 { - compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>; - interrupt-names = "host-wake"; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_hostwake_default_state>; - }; -}; - -&smbb { - qcom,fast-charge-safe-current = <450000>; - qcom,fast-charge-current-limit = <400000>; - qcom,fast-charge-safe-voltage = <4350000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,auto-recharge-threshold-voltage = <4240000>; - qcom,minimum-input-voltage = <4450000>; -}; - -&tlmm { - blsp1_uart4_default_state: blsp1-uart4-default-state { - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - function = "blsp_uart4"; - drive-strength = <8>; - bias-disable; - }; - - bluetooth_default_state: bluetooth-default-state { - pins = "gpio47", "gpio48"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - input-enable; - }; - - touch_pins: touch { - irq { - pins = "gpio17"; - function = "gpio"; - - drive-strength = <8>; - bias-pull-down; - input-enable; - }; - - reset { - pins = "gpio16"; - function = "gpio"; - - drive-strength = <8>; - bias-disable; - output-high; - }; - }; - - wlan_hostwake_default_state: wlan-hostwake-default-state { - pins = "gpio37"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - input-enable; - }; - - wlan_regulator_default_state: wlan-regulator-default-state { - pins = "gpio46"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -&usb { - status = "okay"; - extcon = <&smbb>; - dr_mode = "peripheral"; -}; - -&usb_hs_phy { - extcon = <&smbb>; - v1p8-supply = <&pm8226_l10>; - v3p3-supply = <&pm8226_l20>; -}; |