diff options
Diffstat (limited to 'dts/src/arm/qcom-apq8064-cm-qs600.dts')
| -rw-r--r-- | dts/src/arm/qcom-apq8064-cm-qs600.dts | 246 |
1 files changed, 0 insertions, 246 deletions
diff --git a/dts/src/arm/qcom-apq8064-cm-qs600.dts b/dts/src/arm/qcom-apq8064-cm-qs600.dts deleted file mode 100644 index 0148148a8e..0000000000 --- a/dts/src/arm/qcom-apq8064-cm-qs600.dts +++ /dev/null @@ -1,246 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "CompuLab CM-QS600"; - compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; - - aliases { - serial0 = &gsbi7_serial; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - pwrseq { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "simple-bus"; - - sdcc4_pwrseq: sdcc4_pwrseq { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_default_gpios>; - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - pinctrl@800000 { - card_detect: card_detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; - }; - - pcie_pins: pcie_pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; - }; - }; - - rpm@108000 { - regulators { - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - - - /* Buck SMPS */ - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - qcom,switch-mode-frequency = <4800000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - l3 { - regulator-min-microvolt = <3050000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - l4 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - l23 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - pm8921_lvs6: lvs6 { - bias-pull-down; - }; - - }; - }; - - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - - i2c@12460000 { - status = "okay"; - clock-frequency = <200000>; - - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <32>; - }; - }; - }; - - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi7_uart_2pins>; - }; - }; - - /* OTG */ - usb@12500000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; - }; - - usb@12520000 { - status = "okay"; - dr_mode = "host"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; - }; - - usb@12530000 { - status = "okay"; - dr_mode = "host"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; - }; - - /* on board fixed 3.3v supply */ - v3p3_fixed: v3p3 { - compatible = "regulator-fixed"; - regulator-name = "PCIE V3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - qcom,ssbi@500000 { - pmic@0 { - gpio@150 { - wlan_default_gpios: wlan-gpios { - pios { - pins = "gpio43"; - function = "normal"; - bias-disable; - power-source = <PM8921_GPIO_S4>; - }; - }; - }; - }; - }; - - pci@1b500000 { - status = "okay"; - vdda-supply = <&pm8921_s3>; - vdda_phy-supply = <&pm8921_lvs6>; - vdda_refclk-supply = <&v3p3_fixed>; - pinctrl-0 = <&pcie_pins>; - pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - amba { - /* eMMC */ - sdcc1: sdcc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; - - /* External micro SD card */ - sdcc3: sdcc@12180000 { - status = "okay"; - vmmc-supply = <&v3p3_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; - }; - /* WLAN */ - sdcc4: sdcc@121c0000 { - status = "okay"; - vmmc-supply = <&v3p3_fixed>; - vqmmc-supply = <&v3p3_fixed>; - mmc-pwrseq = <&sdcc4_pwrseq>; - }; - }; - }; -}; |