summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/qcom-apq8064-ifc6410.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/qcom-apq8064-ifc6410.dts')
-rw-r--r--dts/src/arm/qcom-apq8064-ifc6410.dts381
1 files changed, 0 insertions, 381 deletions
diff --git a/dts/src/arm/qcom-apq8064-ifc6410.dts b/dts/src/arm/qcom-apq8064-ifc6410.dts
deleted file mode 100644
index d0a17b5a5f..0000000000
--- a/dts/src/arm/qcom-apq8064-ifc6410.dts
+++ /dev/null
@@ -1,381 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
- model = "Qualcomm APQ8064/IFC6410";
- compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
-
- aliases {
- serial0 = &gsbi7_serial;
- serial1 = &gsbi6_serial;
- i2c0 = &gsbi1_i2c;
- i2c1 = &gsbi2_i2c;
- i2c2 = &gsbi3_i2c;
- i2c3 = &gsbi4_i2c;
- spi0 = &gsbi5_spi;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- pwrseq {
- compatible = "simple-bus";
-
- sdcc4_pwrseq: sdcc4_pwrseq {
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_default_gpios>;
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&notify_led>;
-
- led@1 {
- label = "apq8064:green:user1";
- gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "d";
-
- port {
- hdmi_con: endpoint {
- remote-endpoint = <&hdmi_out>;
- };
- };
- };
-
- soc {
- pinctrl@800000 {
- card_detect: card_detect {
- mux {
- pins = "gpio26";
- function = "gpio";
- bias-disable;
- };
- };
-
- pcie_pins: pcie_pinmux {
- mux {
- pins = "gpio27";
- function = "gpio";
- };
- conf {
- pins = "gpio27";
- drive-strength = <12>;
- bias-disable;
- };
- };
- };
-
- rpm@108000 {
- regulators {
- vin_lvs1_3_6-supply = <&pm8921_s4>;
- vin_lvs2-supply = <&pm8921_s1>;
- vin_lvs4_5_7-supply = <&pm8921_s4>;
-
- vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
- vdd_l24-supply = <&pm8921_s1>;
- vdd_l25-supply = <&pm8921_s1>;
- vdd_l26-supply = <&pm8921_s7>;
- vdd_l27-supply = <&pm8921_s7>;
- vdd_l28-supply = <&pm8921_s7>;
-
-
- /* Buck SMPS */
- s1 {
- regulator-always-on;
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- qcom,switch-mode-frequency = <3200000>;
- bias-pull-down;
- };
-
- s3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- qcom,switch-mode-frequency = <4800000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,switch-mode-frequency = <3200000>;
- };
-
- s7 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <3200000>;
- };
-
- l3 {
- regulator-min-microvolt = <3050000>;
- regulator-max-microvolt = <3300000>;
- bias-pull-down;
- };
-
- l4 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- l5 {
- regulator-min-microvolt = <2750000>;
- regulator-max-microvolt = <3000000>;
- bias-pull-down;
- };
-
- l6 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- bias-pull-down;
- };
-
- l23 {
- regulator-min-microvolt = <1700000>;
- regulator-max-microvolt = <1900000>;
- bias-pull-down;
- };
-
- lvs1 {
- bias-pull-down;
- };
-
- lvs6 {
- bias-pull-down;
- };
- };
- };
-
- ext_3p3v: regulator-fixed@1 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "ext_3p3v";
- regulator-type = "voltage";
- startup-delay-us = <0>;
- gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- };
-
- gsbi3: gsbi@16200000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- i2c@16280000 {
- status = "okay";
- };
- };
-
- gsbi@16300000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- /* CAM I2C MIPI-CSI connector */
- i2c@16380000 {
- status = "okay";
- };
- };
-
- gsbi@12440000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
-
- i2c@12460000 {
- status = "okay";
- clock-frequency = <200000>;
-
- eeprom@52 {
- compatible = "atmel,24c128";
- reg = <0x52>;
- pagesize = <32>;
- };
- };
- };
-
- gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
- spi4: spi@1a280000 {
- status = "okay";
- num-cs = <1>;
- cs-gpios = <&tlmm_pinmux 53 0>;
- };
- };
-
- gsbi@16500000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_UART_W_FC>;
-
- serial@16540000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi6_uart_4pins>;
- };
- };
-
- gsbi@16600000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C_UART>;
- serial@16640000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi7_uart_2pins>;
- };
- };
-
- sata_phy0: phy@1b400000 {
- status = "okay";
- };
-
- sata0: sata@29000000 {
- status = "okay";
- target-supply = <&pm8921_s4>;
- };
-
- /* OTG */
- usb@12500000 {
- status = "okay";
- dr_mode = "otg";
- ulpi {
- phy {
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l4>;
- };
- };
- };
-
- usb@12520000 {
- status = "okay";
- dr_mode = "host";
- ulpi {
- phy {
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
- };
- };
-
- usb@12530000 {
- status = "okay";
- dr_mode = "host";
- ulpi {
- phy {
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
- };
- };
-
- pci@1b500000 {
- status = "okay";
- vdda-supply = <&pm8921_s3>;
- vdda_phy-supply = <&pm8921_lvs6>;
- vdda_refclk-supply = <&ext_3p3v>;
- pinctrl-0 = <&pcie_pins>;
- pinctrl-names = "default";
- perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
- };
-
- qcom,ssbi@500000 {
- pmic@0 {
- gpio@150 {
- wlan_default_gpios: wlan-gpios {
- pios {
- pins = "gpio43";
- function = "normal";
- bias-disable;
- power-source = <PM8921_GPIO_S4>;
- };
- };
-
- notify_led: nled {
- pios {
- pins = "gpio18";
- function = "normal";
- bias-disable;
- power-source = <PM8921_GPIO_S4>;
- };
- };
- };
- };
- };
-
- amba {
- /* eMMC */
- sdcc1: sdcc@12400000 {
- status = "okay";
- vmmc-supply = <&pm8921_l5>;
- vqmmc-supply = <&pm8921_s4>;
- };
-
- /* External micro SD card */
- sdcc3: sdcc@12180000 {
- status = "okay";
- vmmc-supply = <&pm8921_l6>;
- pinctrl-names = "default";
- pinctrl-0 = <&card_detect>;
- cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
- };
- /* WLAN */
- sdcc4: sdcc@121c0000 {
- status = "okay";
- vmmc-supply = <&ext_3p3v>;
- vqmmc-supply = <&pm8921_lvs1>;
- mmc-pwrseq = <&sdcc4_pwrseq>;
- };
- };
-
- hdmi-tx@4a00000 {
- status = "okay";
-
- core-vdda-supply = <&pm8921_hdmi_switch>;
- hdmi-mux-supply = <&ext_3p3v>;
-
- hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
-
- ports {
- port@0 {
- endpoint {
- remote-endpoint = <&mdp_dtv_out>;
- };
- };
-
- port@1 {
- endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
-
- hdmi-phy@4a00400 {
- status = "okay";
-
- core-vdda-supply = <&pm8921_hdmi_switch>;
- };
-
- mdp@5100000 {
- status = "okay";
-
- ports {
- port@3 {
- endpoint {
- remote-endpoint = <&hdmi_in>;
- };
- };
- };
- };
- };
-};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-25 09:32:33 +0000