diff options
Diffstat (limited to 'dts/src/arm/qcom-apq8064-ifc6410.dts')
| -rw-r--r-- | dts/src/arm/qcom-apq8064-ifc6410.dts | 100 |
1 files changed, 95 insertions, 5 deletions
diff --git a/dts/src/arm/qcom-apq8064-ifc6410.dts b/dts/src/arm/qcom-apq8064-ifc6410.dts index a7c939ba88..11ac608b6d 100644 --- a/dts/src/arm/qcom-apq8064-ifc6410.dts +++ b/dts/src/arm/qcom-apq8064-ifc6410.dts @@ -1,5 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; @@ -7,6 +8,34 @@ aliases { serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pwrseq { + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <¬ify_led>; + + led@1 { + label = "apq8064:green:user1"; + gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; }; soc { @@ -73,6 +102,12 @@ bias-pull-down; }; + pm8921_l5: l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; @@ -84,16 +119,30 @@ regulator-max-microvolt = <1900000>; bias-pull-down; }; + + pm8921_lvs1: lvs1 { + bias-pull-down; + }; }; }; + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + gsbi3: gsbi@16200000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; i2c3: i2c@16280000 { status = "okay"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; }; }; @@ -104,10 +153,8 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - eeprom: eeprom@52 { + eeprom@52 { compatible = "atmel,24c128"; reg = <0x52>; pagesize = <32>; @@ -115,11 +162,24 @@ }; }; + gsbi@16500000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@16540000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; }; }; @@ -171,15 +231,42 @@ status = "okay"; }; + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + + notify_led: nled { + pios { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; + }; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + vmmc-supply = <&pm8921_l6>; pinctrl-names = "default"; pinctrl-0 = <&card_detect>; cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; @@ -187,6 +274,9 @@ /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; + vmmc-supply = <&ext_3p3v>; + vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; |