diff options
Diffstat (limited to 'dts/src/arm/qcom-ipq8064-rb3011.dts')
-rw-r--r-- | dts/src/arm/qcom-ipq8064-rb3011.dts | 366 |
1 files changed, 0 insertions, 366 deletions
diff --git a/dts/src/arm/qcom-ipq8064-rb3011.dts b/dts/src/arm/qcom-ipq8064-rb3011.dts deleted file mode 100644 index f7ea2e5dd1..0000000000 --- a/dts/src/arm/qcom-ipq8064-rb3011.dts +++ /dev/null @@ -1,366 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-ipq8064.dtsi" -#include <dt-bindings/input/input.h> - -/ { - model = "MikroTik RB3011UiAS-RM"; - compatible = "mikrotik,rb3011"; - - aliases { - serial0 = &gsbi7_serial; - ethernet0 = &gmac0; - ethernet1 = &gmac3; - mdio-gpio0 = &mdio0; - mdio-gpio1 = &mdio1; - }; - - chosen { - bootargs = "loglevel=8 console=ttyMSM0,115200"; - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - reg = <0x42000000 0x3e000000>; - device_type = "memory"; - }; - - mdio0: mdio@0 { - status = "okay"; - compatible = "virtual,mdio-gpio"; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, - <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch0: switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - - dsa,member = <0 0>; - - pinctrl-0 = <&sw0_reset_pin>; - pinctrl-names = "default"; - - reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - switch0cpu: port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii-id"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "sw1"; - }; - - port@2 { - reg = <2>; - label = "sw2"; - }; - - port@3 { - reg = <3>; - label = "sw3"; - }; - - port@4 { - reg = <4>; - label = "sw4"; - }; - - port@5 { - reg = <5>; - label = "sw5"; - }; - }; - }; - }; - - mdio1: mdio@1 { - status = "okay"; - compatible = "virtual,mdio-gpio"; - gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, - <&qcom_pinmux 10 GPIO_ACTIVE_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&mdio1_pins>; - pinctrl-names = "default"; - - switch1: switch@14 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - - dsa,member = <1 0>; - - pinctrl-0 = <&sw1_reset_pin>; - pinctrl-names = "default"; - - reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - switch1cpu: port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac3>; - phy-mode = "sgmii"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "sw6"; - }; - - port@2 { - reg = <2>; - label = "sw7"; - }; - - port@3 { - reg = <3>; - label = "sw8"; - }; - - port@4 { - reg = <4>; - label = "sw9"; - }; - - port@5 { - reg = <5>; - label = "sw10"; - }; - }; - }; - }; - - soc { - gsbi5: gsbi@1a200000 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - norflash: s25fl016k@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partition@0 { - label = "RouterBoot"; - reg = <0x0 0x40000>; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-0 = <&buttons_pins>; - pinctrl-names = "default"; - - button@1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&leds_pins>; - pinctrl-names = "default"; - - led@7 { - label = "rb3011:green:user"; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac0 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <0>; - phy-handle = <&switch0cpu>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac3 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <3>; - phy-handle = <&switch1cpu>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi7 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; -}; - -&gsbi7_serial { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&nand { - status = "okay"; - - nandcs@0 { - compatible = "qcom,nandcs"; - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - label = "RouterBoard NAND 1 Boot"; - reg = <0x0000000 0x0800000>; - }; - - main@800000 { - label = "RouterBoard NAND 1 Main"; - reg = <0x0800000 0x7800000>; - }; - }; - }; -}; - -&qcom_pinmux { - buttons_pins: buttons_pins { - mux { - pins = "gpio66"; - drive-strength = <16>; - bias-disable; - }; - }; - - leds_pins: leds_pins { - mux { - pins = "gpio33"; - drive-strength = <16>; - bias-disable; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - mdio1_pins: mdio1_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - sw0_reset_pin: sw0_reset_pin { - mux { - pins = "gpio16"; - drive-strength = <16>; - function = "gpio"; - bias-disable; - input-disable; - }; - }; - - sw1_reset_pin: sw1_reset_pin { - mux { - pins = "gpio17"; - drive-strength = <16>; - function = "gpio"; - bias-disable; - input-disable; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio4"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; |