diff options
Diffstat (limited to 'dts/src/arm/qcom-ipq8064-v1.0.dtsi')
-rw-r--r-- | dts/src/arm/qcom-ipq8064-v1.0.dtsi | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/dts/src/arm/qcom-ipq8064-v1.0.dtsi b/dts/src/arm/qcom-ipq8064-v1.0.dtsi deleted file mode 100644 index 5c802b99e1..0000000000 --- a/dts/src/arm/qcom-ipq8064-v1.0.dtsi +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-ipq8064.dtsi" -#include <dt-bindings/input/input.h> - -/ { - model = "Qualcomm Technologies, Inc. IPQ8064-v1.0"; - - aliases { - serial0 = &gsbi4_serial; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - gsbi@16300000 { - qcom,mode = <GSBI_PROT_I2C_UART>; - status = "okay"; - - serial@16340000 { - status = "okay"; - }; - }; - - gsbi5: gsbi@1a200000 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: flash@0 { - compatible = "s25fl256s1"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partition@0 { - label = "rootfs"; - reg = <0x0 0x1000000>; - }; - - partition@1 { - label = "scratch"; - reg = <0x1000000 0x1000000>; - }; - }; - }; - }; - - sata-phy@1b400000 { - status = "okay"; - }; - - sata@29000000 { - ports-implemented = <0x1>; - status = "okay"; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-0 = <&buttons_pins>; - pinctrl-names = "default"; - - button@1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - debounce-interval = <60>; - }; - button@2 { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&leds_pins>; - pinctrl-names = "default"; - - led@7 { - label = "led_usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbdev"; - default-state = "off"; - }; - - led@8 { - label = "led_usb3"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbdev"; - default-state = "off"; - }; - - led@9 { - label = "status_led_fail"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led@26 { - label = "sata_led"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led@53 { - label = "status_led_pass"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - }; -}; |