diff options
Diffstat (limited to 'dts/src/arm/qcom-msm8974-sony-xperia-castor.dts')
| -rw-r--r-- | dts/src/arm/qcom-msm8974-sony-xperia-castor.dts | 723 |
1 files changed, 0 insertions, 723 deletions
diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts b/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts deleted file mode 100644 index e66937e3f7..0000000000 --- a/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts +++ /dev/null @@ -1,723 +0,0 @@ -#include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z2 Tablet"; - compatible = "sony,xperia-castor", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp2_uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - smd { - rpm { - rpm_requests { - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-system-load = <154000>; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-allow-set-load; - regulator-system-load = <500000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; - - vreg_bl_vddio: lcd-backlight-vddio { - compatible = "regulator-fixed"; - regulator-name = "vreg_bl_vddio"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - gpio = <&msmgpio 69 0>; - enable-active-high; - - vin-supply = <&pm8941_s3>; - startup-delay-us = <70000>; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_backlight_en_pin_a>; - }; - - vreg_vsp: lcd-dcdc-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_vsp"; - regulator-min-microvolt = <5600000>; - regulator-max-microvolt = <5600000>; - - gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_dcdc_en_pin_a>; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_regulator_pin>; - }; -}; - -&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f9864900 { - status = "okay"; - - max-frequency = <100000000>; - non-removable; - vmmc-supply = <&vreg_wlan>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - - #address-cells = <1>; - #size-cells = <0>; - - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - brcm,drive-strength = <10>; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; - }; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - serial@f995d000 { - status = "ok"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart7_pin_a>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_pin>, - <&bt_dev_wake_pin>, - <&bt_reg_on_pin>; - - host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; - }; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - blsp2_uart7_pin_a: blsp2-uart7-pin-active { - tx { - pins = "gpio41"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio42"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - cts { - pins = "gpio43"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - rts { - pins = "gpio44"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c8_pins: i2c8 { - mux { - pins = "gpio47", "gpio48"; - function = "blsp_i2c8"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - - drive-strength = <2>; - bias-disable; - }; - }; - - lcd_backlight_en_pin_a: lcd-backlight-vddio { - pins = "gpio69"; - drive-strength = <10>; - output-low; - bias-disable; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "gpio40"; - function = "sdc3"; - - drive-strength = <10>; - bias-disable; - }; - - cmd { - pins = "gpio39"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - - data { - pins = "gpio35", "gpio36", "gpio37", "gpio38"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - }; - - ts_int_pin: synaptics { - pin { - pins = "gpio86"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - - bt_host_wake_pin: bt-host-wake { - pins = "gpio95"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - output-low; - }; - - bt_dev_wake_pin: bt-dev-wake { - pins = "gpio96"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c@f9964000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupt-parent = <&msmgpio>; - interrupts = <86 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi-f01@1 { - reg = <0x1>; - syna,nosleep = <1>; - }; - - rmi-f11@11 { - reg = <0x11>; - syna,f11-flip-x = <1>; - syna,sensor-type = <1>; - }; - }; - }; - - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - lp8566_wled: backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - power-supply = <&vreg_bl_vddio>; - - bl-name = "backlight"; - dev-ctrl = /bits/ 8 <0x05>; - init-brt = /bits/ 8 <0x3f>; - rom_a0h { - rom-addr = /bits/ 8 <0xa0>; - rom-val = /bits/ 8 <0xff>; - }; - rom_a1h { - rom-addr = /bits/ 8 <0xa1>; - rom-val = /bits/ 8 <0x3f>; - }; - rom_a2h { - rom-addr = /bits/ 8 <0xa2>; - rom-val = /bits/ 8 <0x20>; - }; - rom_a3h { - rom-addr = /bits/ 8 <0xa3>; - rom-val = /bits/ 8 <0x5e>; - }; - rom_a4h { - rom-addr = /bits/ 8 <0xa4>; - rom-val = /bits/ 8 <0x02>; - }; - rom_a5h { - rom-addr = /bits/ 8 <0xa5>; - rom-val = /bits/ 8 <0x04>; - }; - rom_a6h { - rom-addr = /bits/ 8 <0xa6>; - rom-val = /bits/ 8 <0x80>; - }; - rom_a7h { - rom-addr = /bits/ 8 <0xa7>; - rom-val = /bits/ 8 <0xf7>; - }; - rom_a9h { - rom-addr = /bits/ 8 <0xa9>; - rom-val = /bits/ 8 <0x80>; - }; - rom_aah { - rom-addr = /bits/ 8 <0xaa>; - rom-val = /bits/ 8 <0x0f>; - }; - rom_aeh { - rom-addr = /bits/ 8 <0xae>; - rom-val = /bits/ 8 <0x0f>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - - bt_reg_on_pin: bt-reg-on { - pins = "gpio16"; - function = "normal"; - - output-low; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio17"; - function = "func2"; - - output-high; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_regulator_pin: wl-reg-active { - pins = "gpio18"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; - - lcd_dcdc_en_pin_a: lcd-dcdc-en-active { - pins = "gpio20"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - input-disable; - output-low; - }; - - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; -}; |