diff options
Diffstat (limited to 'dts/src/arm/qcom-msm8974.dtsi')
| -rw-r--r-- | dts/src/arm/qcom-msm8974.dtsi | 53 |
1 files changed, 42 insertions, 11 deletions
diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi index c3b8a6d630..8baca2a777 100644 --- a/dts/src/arm/qcom-msm8974.dtsi +++ b/dts/src/arm/qcom-msm8974.dtsi @@ -96,7 +96,7 @@ firmware { scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-msm8974", "qcom,scm"; clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; clock-names = "core", "bus", "iface"; }; @@ -436,7 +436,7 @@ reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; - sdhc_1: sdhci@f9824900 { + sdhc_1: mmc@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -453,7 +453,7 @@ status = "disabled"; }; - sdhc_3: sdhci@f9864900 { + sdhc_3: mmc@f9864900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -472,7 +472,7 @@ status = "disabled"; }; - sdhc_2: sdhci@f98a4900 { + sdhc_2: mmc@f98a4900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -580,7 +580,7 @@ blsp2_uart1: serial@f995d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995d000 0x1000>; - interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; @@ -1128,10 +1128,10 @@ }; qfprom: qfprom@fc4bc000 { + compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; #address-cells = <1>; #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; tsens_calib: calib@d0 { reg = <0xd0 0x18>; }; @@ -1156,6 +1156,18 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@fc834000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xfc834000 0x7000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + }; + remoteproc_mss: remoteproc@fc880000 { compatible = "qcom,msm8974-mss-pil"; reg = <0xfc880000 0x100>, <0xfc820000 0x020>; @@ -1182,6 +1194,8 @@ qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; + status = "disabled"; + mba { memory-region = <&mba_region>; }; @@ -1190,6 +1204,20 @@ memory-region = <&mpss_region>; }; + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&modem_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + }; + smd-edge { interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; @@ -1608,7 +1636,7 @@ status = "disabled"; - gpu_opp_table: opp_table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-320000000 { @@ -1625,11 +1653,12 @@ }; }; - ocmem@fdd00000 { + sram@fdd00000 { compatible = "qcom,msm8974-ocmem"; reg = <0xfdd00000 0x2000>, <0xfec00000 0x180000>; reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x180000>; clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, <&mmcc OCMEMCX_OCMEMNOC_CLK>; clock-names = "core", "iface"; @@ -1661,6 +1690,8 @@ qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; + status = "disabled"; + smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; @@ -1672,8 +1703,8 @@ }; }; - imem: imem@fe805000 { - compatible = "syscon", "simple-mfd"; + imem: sram@fe805000 { + compatible = "qcom,msm8974-imem", "syscon", "simple-mfd"; reg = <0xfe805000 0x1000>; reboot-mode { |