diff options
Diffstat (limited to 'dts/src/arm/qcom-pm8941.dtsi')
| -rw-r--r-- | dts/src/arm/qcom-pm8941.dtsi | 36 |
1 files changed, 35 insertions, 1 deletions
diff --git a/dts/src/arm/qcom-pm8941.dtsi b/dts/src/arm/qcom-pm8941.dtsi index f8eb5e31c9..3fc9f34f45 100644 --- a/dts/src/arm/qcom-pm8941.dtsi +++ b/dts/src/arm/qcom-pm8941.dtsi @@ -26,7 +26,14 @@ bias-pull-up; }; - charger@1000 { + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + + smbb: charger@1000 { compatible = "qcom,pm8941-charger"; reg = <0x1000>; interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, @@ -45,6 +52,10 @@ "chg-gone", "usb-valid", "dc-valid"; + + usb-otg-in-supply = <&pm8941_5vs1>; + + chg_otg: otg-vbus { }; }; pm8941_gpios: gpios@c000 { @@ -171,5 +182,28 @@ status = "disabled"; }; + + regulators { + compatible = "qcom,pm8941-regulators"; + interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>; + interrupt-names = "ocp-5vs1", "ocp-5vs2"; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_5v: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-enable-ramp-delay = <500>; + }; + + pm8941_5vs1: 5vs1 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; + }; }; }; |