diff options
Diffstat (limited to 'dts/src/arm/qcom-sdx65.dtsi')
| -rw-r--r-- | dts/src/arm/qcom-sdx65.dtsi | 273 |
1 files changed, 271 insertions, 2 deletions
diff --git a/dts/src/arm/qcom-sdx65.dtsi b/dts/src/arm/qcom-sdx65.dtsi index df6f9d6288..8daefd5021 100644 --- a/dts/src/arm/qcom-sdx65.dtsi +++ b/dts/src/arm/qcom-sdx65.dtsi @@ -37,6 +37,12 @@ clock-output-names = "sleep_clk"; #clock-cells = <0>; }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; }; cpus { @@ -48,9 +54,50 @@ compatible = "arm,cortex-a7"; reg = <0x0>; enable-method = "psci"; + clocks = <&apcs>; + power-domains = <&rpmhpd SDX65_CX_AO>; + power-domain-names = "rpmhpd"; + operating-points-v2 = <&cpu_opp_table>; }; }; + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdx65", "qcom,scm"; + }; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sdx65-mc-virt"; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -87,8 +134,10 @@ }; smem_mem: memory@8fe20000 { - no-map; + compatible = "qcom,smem"; reg = <0x8fe20000 0xc0000>; + hwlocks = <&tcsr_mutex 3>; + no-map; }; cmd_db: reserved-memory@8fee0000 { @@ -113,6 +162,37 @@ }; }; + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -124,6 +204,7 @@ reg = <0x00100000 0x001f7400>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; }; @@ -137,13 +218,120 @@ status = "disabled"; }; + usb_hsphy: phy@ff4000 { + compatible = "qcom,usb-snps-hs-7nm-phy"; + reg = <0xff4000 0x120>; + #phy-cells = <0>; + status = "disabled"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_BCR>; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx65-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x1c8>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_EN>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3PHY_PHY_BCR>, + <&gcc GCC_USB3_PHY_BCR>; + reset-names = "phy", "common"; + + usb_ssphy: phy@ff6200 { + reg = <0x00ff6e00 0x160>, + <0x00ff7000 0x1ec>, + <0x00ff6200 0x1e00>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sdx65-system-noc"; + reg = <0x01620000 0x31200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qpic_bam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x01b04000 0x1c000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + status = "disabled"; + }; + + qpic_nand: nand-controller@1b30000 { + compatible = "qcom,sdx55-nand"; + reg = <0x01b30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmhcc RPMH_QPIC_CLK>, + <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x01f40000 0x40000>; #hwlock-cells = <1>; }; - sdhc_1: sdhci@8804000 { + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sdx55-mpss-pas"; + reg = <0x04080000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SDX65_CX>, + <&rpmhpd SDX65_MSS>; + power-domain-names = "cx", "mss"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs 15>; + }; + }; + + sdhc_1: mmc@8804000 { compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; reg = <0x08804000 0x1000>; reg-names = "hc_mem"; @@ -156,6 +344,63 @@ status = "disabled"; }; + mem_noc: interconnect@9680000 { + compatible = "qcom,sdx65-mem-noc"; + reg = <0x09680000 0x27200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb: usb@a6f8800 { + compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 76 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 18 IRQ_TYPE_EDGE_BOTH>, + <&pdc 19 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0x0c264000 0x1000>; + }; + spmi_bus: qcom,spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0xd00>, @@ -196,6 +441,19 @@ interrupt-controller; }; + imem@1468f000 { + compatible = "simple-mfd"; + reg = <0x1468f000 0x1000>; + ranges = <0x0 0x1468f000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdx65-smmu-500", "arm,mmu-500"; reg = <0x15000000 0x40000>; @@ -262,6 +520,12 @@ #clock-cells = <0>; }; + watchdog@17817000 { + compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt"; + reg = <0x17817000 0x1000>; + clocks = <&sleep_clk>; + }; + timer@17820000 { #address-cells = <1>; #size-cells = <1>; @@ -399,6 +663,11 @@ }; }; }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; }; |