diff options
Diffstat (limited to 'dts/src/arm/qcom')
93 files changed, 26812 insertions, 0 deletions
diff --git a/dts/src/arm/qcom/pm8018.dtsi b/dts/src/arm/qcom/pm8018.dtsi new file mode 100644 index 0000000000..22f3c7bac5 --- /dev/null +++ b/dts/src/arm/qcom/pm8018.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Device Tree Source for Qualcomm PM8018 + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + */ + +&ssbi { + pm8018: pmic { + compatible = "qcom,pm8018", "qcom,pm8921"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8018-pwrkey", + "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>, + <&pm8018 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8018_mpps: mpps@50 { + compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8018_mpps 0 0 6>; + }; + + rtc@11d { + compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + + pm8018_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8018_gpio 0 0 6>; + #gpio-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm/qcom/pm8058.dtsi b/dts/src/arm/qcom/pm8058.dtsi new file mode 100644 index 0000000000..984b797779 --- /dev/null +++ b/dts/src/arm/qcom/pm8058.dtsi @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 + +&ssbi { + pm8058: pmic { + compatible = "qcom,pm8058"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8058-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>, + <&pm8058 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8058_led48: led@48 { + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + status = "disabled"; + }; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + + pm8058_mpps: mpps@50 { + compatible = "qcom,pm8058-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8058_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8058_led131: led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + status = "disabled"; + }; + + pm8058_led132: led@132 { + compatible = "qcom,pm8058-led"; + reg = <0x132>; + status = "disabled"; + }; + + pm8058_led133: led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + status = "disabled"; + }; + + pm8058_keypad: keypad@148 { + compatible = "qcom,pm8058-keypad"; + reg = <0x148>; + interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>, + <&pm8058 75 IRQ_TYPE_EDGE_RISING>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + pm8058_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8058_gpio 0 0 44>; + #gpio-cells = <2>; + }; + + pm8058_xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + + ichg: adc-channel@3 { + reg = <0x00 0x03>; + }; + + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + + ref_325mv: adc-channel@e { + reg = <0x00 0x0e>; + }; + + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; + }; + + rtc@1e8 { + compatible = "qcom,pm8058-rtc"; + reg = <0x1e8>; + interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + }; +}; + +/ { + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */ + <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ + }; +}; diff --git a/dts/src/arm/qcom/pm8226.dtsi b/dts/src/arm/qcom/pm8226.dtsi new file mode 100644 index 0000000000..2fd4f135ed --- /dev/null +++ b/dts/src/arm/qcom/pm8226.dtsi @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: BSD-3-Clause +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8226-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8226_temp>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "hot"; + }; + + crit { + temperature = <145000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pm8226_0: pm8226@0 { + compatible = "qcom,pm8226", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm8226_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + smbb: charger@1000 { + compatible = "qcom,pm8226-charger"; + reg = <0x1000>; + interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "chg-done", + "chg-fast", + "chg-trkl", + "bat-temp-ok", + "bat-present", + "chg-gone", + "usb-valid", + "dc-valid"; + + status = "disabled"; + + chg_otg: otg-vbus { }; + }; + + pm8226_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8226_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8226_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@7 { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + channel@8 { + reg = <VADC_DIE_TEMP>; + label = "die_temp"; + }; + channel@9 { + reg = <VADC_REF_625MV>; + label = "ref_625mv"; + }; + channel@a { + reg = <VADC_REF_1250MV>; + label = "ref_1250mv"; + }; + channel@e { + reg = <VADC_GND_REF>; + }; + channel@f { + reg = <VADC_VDD_VADC>; + }; + }; + + pm8226_iadc: adc@3600 { + compatible = "qcom,pm8226-iadc", "qcom,spmi-iadc"; + reg = <0x3600>; + interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8226_mpps: mpps@a000 { + compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8226_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8226_gpios: gpio@c000 { + compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8226_gpios 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8226_1: pm8226@1 { + compatible = "qcom,pm8226", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8226_spmi_regulators: regulators { + compatible = "qcom,pm8226-regulators"; + }; + + pm8226_vib: vibrator@c000 { + compatible = "qcom,pm8916-vib"; + reg = <0xc000>; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/qcom/pm8821.dtsi b/dts/src/arm/qcom/pm8821.dtsi new file mode 100644 index 0000000000..064e3ba54e --- /dev/null +++ b/dts/src/arm/qcom/pm8821.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This PMIC is used on a secondary SSBI bus */ +&ssbi2 { + pm8821: pmic { + compatible = "qcom,pm8821"; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pm8821_mpps: mpps@50 { + compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8821_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm/qcom/pm8841.dtsi b/dts/src/arm/qcom/pm8841.dtsi new file mode 100644 index 0000000000..3bf2ce5c86 --- /dev/null +++ b/dts/src/arm/qcom/pm8841.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + + +/ { + thermal-zones { + pm8841-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8841_temp>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "hot"; + }; + + crit { + temperature = <140000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + + pm8841_0: pm8841@4 { + compatible = "qcom,pm8841", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8841_mpps: mpps@a000 { + compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8841_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8841_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + }; + }; + + pm8841_1: pm8841@5 { + compatible = "qcom,pm8841", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/dts/src/arm/qcom/pm8921.dtsi b/dts/src/arm/qcom/pm8921.dtsi new file mode 100644 index 0000000000..058962af30 --- /dev/null +++ b/dts/src/arm/qcom/pm8921.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 + +&ssbi { + pm8921: pmic { + compatible = "qcom,pm8921"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>, + <&pm8921 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8921_mpps: mpps@50 { + compatible = "qcom,pm8921-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8921_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + + pm8921_keypad: keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>, + <&pm8921 75 IRQ_TYPE_EDGE_RISING>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + status = "disabled"; + }; + + pm8921_gpio: gpio@150 { + + compatible = "qcom,pm8921-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8921_gpio 0 0 44>; + #gpio-cells = <2>; + + }; + + pm8921_xoadc: xoadc@197 { + compatible = "qcom,pm8921-adc"; + reg = <0x197>; + interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + + batt_therm: adc-channel@8 { + reg = <0x00 0x08>; + }; + + batt_id: adc-channel@9 { + reg = <0x00 0x09>; + }; + + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + + chg_temp: adc-channel@e { + reg = <0x00 0x0e>; + }; + + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; + }; + }; +}; + +/ { + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */ + <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */ + }; +}; diff --git a/dts/src/arm/qcom/pm8941.dtsi b/dts/src/arm/qcom/pm8941.dtsi new file mode 100644 index 0000000000..aca0052a02 --- /dev/null +++ b/dts/src/arm/qcom/pm8941.dtsi @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + + +/ { + thermal-zones { + pm8941-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8941_temp>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "hot"; + }; + + crit { + temperature = <145000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + + pm8941_0: pm8941@0 { + compatible = "qcom,pm8941", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, + <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pon@800 { + compatible = "qcom,pm8941-pon"; + reg = <0x800>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + + pm8941_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + usb_id: usb-detect@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + + smbb: charger@1000 { + compatible = "qcom,pm8941-charger"; + reg = <0x1000>; + interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "chg-done", + "chg-fast", + "chg-trkl", + "bat-temp-ok", + "bat-present", + "chg-gone", + "usb-valid", + "dc-valid"; + + usb-otg-in-supply = <&pm8941_5vs1>; + + status = "disabled"; + + chg_otg: otg-vbus { }; + }; + + pm8941_gpios: gpio@c000 { + compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8941_gpios 0 0 36>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + boost_bypass_n_pin: boost-bypass-state { + pins = "gpio21"; + function = "normal"; + }; + }; + + pm8941_mpps: mpps@a000 { + compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8941_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8941_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8941_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8941_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + + channel@6 { + reg = <VADC_VBAT_SNS>; + }; + + channel@8 { + reg = <VADC_DIE_TEMP>; + }; + + channel@9 { + reg = <VADC_REF_625MV>; + }; + + channel@a { + reg = <VADC_REF_1250MV>; + }; + + channel@e { + reg = <VADC_GND_REF>; + }; + + channel@f { + reg = <VADC_VDD_VADC>; + }; + + channel@30 { + reg = <VADC_LR_MUX1_BAT_THERM>; + }; + }; + + pm8941_iadc: adc@3600 { + compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; + reg = <0x3600>; + interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; + qcom,external-resistor-micro-ohms = <10000>; + }; + + pm8941_coincell: charger@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + status = "disabled"; + }; + }; + + pm8941_1: pm8941@1 { + compatible = "qcom,pm8941", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8941_lpg: pwm { + compatible = "qcom,pm8941-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + + pm8941_vib: vibrator@c000 { + compatible = "qcom,pm8916-vib"; + reg = <0xc000>; + status = "disabled"; + }; + + pm8941_wled: wled@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800>; + label = "backlight"; + + status = "disabled"; + }; + + regulators { + compatible = "qcom,pm8941-regulators"; + interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>; + interrupt-names = "ocp-5vs1", "ocp-5vs2"; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_5v: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-enable-ramp-delay = <500>; + }; + + pm8941_5vs1: 5vs1 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; + + pm8941_5vs2: 5vs2 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; + }; + }; +}; diff --git a/dts/src/arm/qcom/pma8084.dtsi b/dts/src/arm/qcom/pma8084.dtsi new file mode 100644 index 0000000000..2985f4805b --- /dev/null +++ b/dts/src/arm/qcom/pma8084.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + pma8084_0: pma8084@0 { + compatible = "qcom,pma8084", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, + <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + + pma8084_gpios: gpio@c000 { + compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pma8084_gpios 0 0 22>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pma8084_mpps: mpps@a000 { + compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pma8084_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pma8084_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + io-channels = <&pma8084_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + }; + + pma8084_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@8 { + reg = <VADC_DIE_TEMP>; + }; + + channel@9 { + reg = <VADC_REF_625MV>; + }; + + channel@a { + reg = <VADC_REF_1250MV>; + }; + + channel@c { + reg = <VADC_SPARE1>; + }; + + channel@e { + reg = <VADC_GND_REF>; + }; + + channel@f { + reg = <VADC_VDD_VADC>; + }; + }; + }; + + pma8084_1: pma8084@1 { + compatible = "qcom,pma8084", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/dts/src/arm/qcom/pmx55.dtsi b/dts/src/arm/qcom/pmx55.dtsi new file mode 100644 index 0000000000..da0851173c --- /dev/null +++ b/dts/src/arm/qcom/pmx55.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/* + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@8 { + compatible = "qcom,pmx55", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pmx55_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmx55_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmx55_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + channel@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + channel@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + channel@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + channel@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + }; + + pmx55_gpios: gpio@c000 { + compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmx55_gpios 0 0 11>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@9 { + compatible = "qcom,pmx55", "qcom,spmi-pmic"; + reg = <0x9 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/dts/src/arm/qcom/pmx65.dtsi b/dts/src/arm/qcom/pmx65.dtsi new file mode 100644 index 0000000000..1c7fdf59c1 --- /dev/null +++ b/dts/src/arm/qcom/pmx65.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@1 { + compatible = "qcom,pmx65", "qcom,spmi-pmic"; + reg = <1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmx65_temp: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmx65_gpios: gpio@8800 { + compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmx65_gpios 0 0 16>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-apq8016-sbc.dts b/dts/src/arm/qcom/qcom-apq8016-sbc.dts new file mode 100644 index 0000000000..4ccd2dca74 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8016-sbc.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/apq8016-sbc.dts" diff --git a/dts/src/arm/qcom/qcom-apq8026-asus-sparrow.dts b/dts/src/arm/qcom/qcom-apq8026-asus-sparrow.dts new file mode 100644 index 0000000000..a2ca456012 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8026-asus-sparrow.dts @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; + +/ { + model = "ASUS ZenWatch 2"; + compatible = "asus,sparrow", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 3005>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&adsp { + status = "okay"; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart1_default_state>; + + bluetooth { + compatible = "brcm,bcm43430a1-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + }; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <350000>; + qcom,fast-charge-safe-voltage = <4430000>; + qcom,fast-charge-high-threshold-voltage = <4400000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4400000>; + + status = "okay"; +}; + +&tlmm { + blsp1_uart1_default_state: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio48", "gpio61"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb { + status = "okay"; + extcon = <&smbb>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/dts/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts b/dts/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts new file mode 100644 index 0000000000..ac228965a4 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" +#include <dt-bindings/input/ti-drv260x.h> + +/delete-node/ &adsp_region; + +/ { + model = "Huawei Watch"; + compatible = "huawei,sturgeon", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 4>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&adsp { + status = "okay"; +}; + +&blsp1_i2c2 { + clock-frequency = <384000>; + + status = "okay"; + + vibrator@5a { + compatible = "ti,drv2605"; + reg = <0x5a>; + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + + mode = <DRV260X_ERM_MODE>; + library-sel = <DRV260X_ERM_LIB_D>; + vib-rated-mv = <2765>; + vib-overdrive-mv = <3525>; + + pinctrl-0 = <&vibrator_default_state>; + pinctrl-names = "default"; + }; +}; + +&blsp1_i2c5 { + clock-frequency = <384000>; + + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + vio-supply = <&pm8226_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_default_state>; + + syna,startup-delay-ms = <160>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart4_default_state>; + + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43430a0-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_3 { + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-voltage = <4370000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,minimum-input-voltage = <4350000>; + qcom,fast-charge-current-limit = <300000>; + qcom,fast-charge-safe-current = <600000>; + qcom,auto-recharge-threshold-voltage = <4240000>; + + status = "okay"; +}; + +&tlmm { + blsp1_uart4_default_state: blsp1-uart4-default-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "blsp_uart4"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio63", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + touch_default_state: touch-default-state { + irq-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio16"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + vibrator_default_state: vibrator-default-state { + pins = "gpio59", "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/dts/src/arm/qcom/qcom-apq8026-lg-lenok.dts b/dts/src/arm/qcom/qcom-apq8026-lg-lenok.dts new file mode 100644 index 0000000000..a70de21bf1 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8026-lg-lenok.dts @@ -0,0 +1,396 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> + +/delete-node/ &adsp_region; + +/ { + model = "LG G Watch R"; + compatible = "lg,lenok", "qcom,apq8026"; + chassis-type = "watch"; + qcom,board-id = <132 0x0a>; + qcom,msm-id = <199 0x20000>; + + aliases { + serial0 = &blsp1_uart3; + serial1 = &blsp1_uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + + external_image_region: external-image@3100000 { + reg = <0x03100000 0x200000>; + no-map; + }; + + adsp_region: adsp@3300000 { + reg = <0x03300000 0x1400000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; + + pwm_vibrator: pwm { + compatible = "clk-pwm"; + clocks = <&mmcc CAMSS_GP0_CLK>; + + pinctrl-0 = <&vibrator_clk_default_state>; + pinctrl-names = "default"; + + #pwm-cells = <2>; + }; + + vibrator { + compatible = "pwm-vibrator"; + + pwms = <&pwm_vibrator 0 10000>; + pwm-names = "enable"; + + vcc-supply = <&pm8226_l28>; + enable-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&vibrator_en_default_state>; + pinctrl-names = "default"; + }; +}; + +&adsp { + status = "okay"; +}; + +&blsp1_i2c1 { + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27421"; + reg = <0x55>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <384000>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l22>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&blsp1_uart4 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart4_default_state>; + + bluetooth { + compatible = "brcm,bcm43430a0-bt"; + + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <450000>; + qcom,fast-charge-current-limit = <400000>; + qcom,fast-charge-safe-voltage = <4350000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4240000>; + qcom,minimum-input-voltage = <4450000>; + + status = "okay"; +}; + +&tlmm { + blsp1_uart4_default_state: blsp1-uart4-default-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "blsp_uart4"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touch_pins: touch-state { + irq-pins { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio16"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + + vibrator_clk_default_state: vibrator-clk-default-state { + pins = "gpio33"; + function = "gp0_clk"; + drive-strength = <2>; + bias-disable; + }; + + vibrator_en_default_state: vibrator-en-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb { + status = "okay"; + extcon = <&smbb>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/dts/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/dts/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts new file mode 100644 index 0000000000..da3be658e8 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> + */ + +/dts-v1/; + +#include "qcom-msm8226-samsung-matisse-common.dtsi" + +/ { + model = "Samsung Galaxy Tab 4 10.1"; + compatible = "samsung,matisse-wifi", "qcom,apq8026"; + chassis-type = "tablet"; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en1_default_state>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default_state>; + + st,drdy-int-pin = <1>; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupt-parent = <&tlmm>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + linux,keycodes = <KEY_RESERVED>, + <KEY_RESERVED>, + <KEY_RESERVED>, + <KEY_RESERVED>, + <KEY_APPSELECT>, + <KEY_BACK>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_int_rst_default_state>; + + reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>; + + vdd-supply = <®_tsp_1p8v>; + vdda-supply = <®_tsp_3p3v>; + }; +}; + +&pm8226_l3 { + regulator-max-microvolt = <1337500>; +}; + +&pm8226_s4 { + regulator-max-microvolt = <1800000>; +}; + +&tlmm { + tsp_en1_default_state: tsp-en1-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/dts/src/arm/qcom/qcom-apq8060-dragonboard.dts b/dts/src/arm/qcom/qcom-apq8060-dragonboard.dts new file mode 100644 index 0000000000..009afd8212 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8060-dragonboard.dts @@ -0,0 +1,1024 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> +#include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" + +/ { + model = "Qualcomm APQ8060 Dragonboard"; + compatible = "qcom,apq8060-dragonboard", "qcom,msm8660"; + + aliases { + serial0 = &gsbi12_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* Main power of the board: 3.7V */ + vph: regulator-fixed { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-name = "VPH"; + regulator-always-on; + regulator-boot-on; + }; + + /* GPIO controlled ethernet power regulator */ + dragon_veth: xc622a331mrg { + compatible = "regulator-fixed"; + regulator-name = "XC6222A331MR-G"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vph>; + gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_veth_gpios>; + regulator-always-on; + }; + + /* VDDvario fixed regulator */ + dragon_vario: nds332p { + compatible = "regulator-fixed"; + regulator-name = "NDS332P"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&pm8058_s3>; + }; + + /* This is a levelshifter for SDCC5 */ + dragon_vio_txb: txb0104rgyr { + compatible = "regulator-fixed"; + regulator-name = "Dragon SDCC levelshifter"; + vin-supply = <&pm8058_l14>; + regulator-always-on; + }; + + /* + * Capella CM3605 light and proximity sensor mounted directly + * on the sensor board. + */ + cm3605 { + compatible = "capella,cm3605"; + vdd-supply = <&pm8058_l14>; // 2.85V + aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>; + capella,aset-resistance-ohms = <100000>; + /* Trig on both edges - getting close or far away */ + interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>; + /* MPP05 analog input to the XOADC */ + io-channels = <&pm8058_xoadc 0x00 0x05>; + io-channel-names = "aout"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>; + }; +}; + +&ebi2 { + /* The EBI2 will instantiate first, then populate its children */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ebi2_pins>; + status = "okay"; + + /* + * An on-board SMSC LAN9221 chip for "debug ethernet", + * which is actually just an ordinary ethernet on the + * EBI2. This has a 25MHz chrystal next to it, so no + * clocking is needed. + */ + ethernet@2,0 { + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <2 0x0 0x100>; + /* + * The second interrupt is the PME interrupt + * for network wakeup, connected to the TLMM. + */ + interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>, + <&tlmm 29 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + vdd33a-supply = <&dragon_veth>; + vddvario-supply = <&dragon_vario>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ethernet_gpios>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,force-external-phy; + smsc,irq-push-pull; + + /* + * SLOW chipselect config + * Delay 9 cycles (140ns@64MHz) between SMSC + * LAN9221 Ethernet controller reads and writes + * on CS2. + */ + qcom,xmem-recovery-cycles = <0>; + qcom,xmem-write-hold-cycles = <3>; + qcom,xmem-write-delta-cycles = <31>; + qcom,xmem-read-delta-cycles = <28>; + qcom,xmem-write-wait-cycles = <9>; + qcom,xmem-read-wait-cycles = <9>; + }; +}; + +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi3_i2c { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi3_i2c_pins>; + status = "okay"; + + touchscreen@24 { + compatible = "cypress,cy8ctma340"; + reg = <0x24>; + /* Certainly we can do at least 400 kHz */ + clock-frequency = <400000>; + /* IRQ on GPIO61 called /CTP_INT */ + interrupt-parent = <&tlmm>; + interrupts = <61 IRQ_TYPE_EDGE_FALLING>; + /* + * The I2C bus is using a PCA9306 level translator from L16A + * to L2B so these two voltages are needed and L16A is + * kind of the IO voltage, however L16Aisn't really fed to + * the TMA340, which relies entirely on L2B (PM8901 L2). + */ + vcpin-supply = <&pm8058_l16>; + vdd-supply = <&pm8901_l2>; + /* GPIO58, called WAKE_CTP */ + reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_tma340_gpios>; + }; +}; + +&gsbi8 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi8_i2c { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi8_i2c_pins>; + status = "okay"; + + eeprom@52 { + /* A 16KiB Platform ID EEPROM on the CPU carrier board */ + compatible = "atmel,24c128"; + reg = <0x52>; + vcc-supply = <&pm8058_s3>; + pagesize = <64>; + }; + wm8903: wm8903@1a { + /* This Woolfson Micro device has an unrouted interrupt line */ + compatible = "wlf,wm8903"; + reg = <0x1a>; + + AVDD-supply = <&pm8058_l16>; + CPVDD-supply = <&pm8058_l16>; + DBVDD-supply = <&pm8058_s3>; + DCVDD-supply = <&pm8058_l0>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; +}; + +&gsbi12 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi12_serial { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_serial_pins>; + status = "okay"; +}; + +&gsbi12_i2c { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_i2c_pins>; + status = "okay"; + + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <33 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ak8975_gpios>; + vid-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + }; + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_bmp085_gpios>; + vddd-supply = <&pm8058_lvs0>; // 1.8V + vdda-supply = <&pm8058_l14>; // 2.85V + }; + mpu3050@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + /* + * GPIO17 is pulled high by a 10k + * resistor to VLOGIC so needs to be + * active low/falling edge. + */ + interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_mpu3050_gpios>; + vlogic-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + + /* + * The MPU-3050 acts as a hub for the + * accelerometer. + */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + kxsd9@18 { + compatible = "kionix,kxsd9"; + reg = <0x18>; + interrupt-parent = <&tlmm>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_kxsd9_gpios>; + iovdd-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + }; + }; + }; +}; + +&pm8058 { + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8058_gpio { + dragon_ethernet_gpios: ethernet-state { + pinconf { + pins = "gpio7"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_bmp085_gpios: bmp085-state { + pinconf { + pins = "gpio16"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_mpu3050_gpios: mpu3050-state { + pinconf { + pins = "gpio17"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_sdcc3_gpios: sdcc3-state { + pinconf { + pins = "gpio22"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_sdcc5_gpios: sdcc5-state { + pinconf { + pins = "gpio26"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_ak8975_gpios: ak8975-state { + pinconf { + pins = "gpio33"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_cm3605_gpios: cm3605-state { + /* Pin 34 connected to the proxy IRQ */ + gpio34-pins { + pins = "gpio34"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + /* Pin 35 connected to ASET */ + gpio35-pins { + pins = "gpio35"; + function = "normal"; + output-high; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_veth_gpios: veth-state { + pinconf { + pins = "gpio40"; + function = "normal"; + bias-disable; + drive-push-pull; + }; + }; +}; + +&pm8058_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_MENU) + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 3, KEY_4) + MATRIX_KEY(0, 4, KEY_7) + MATRIX_KEY(1, 0, KEY_UP) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_5) + MATRIX_KEY(1, 3, KEY_8) + MATRIX_KEY(2, 0, KEY_HOME) + MATRIX_KEY(2, 1, KEY_REPLY) + MATRIX_KEY(2, 2, KEY_2) + MATRIX_KEY(2, 3, KEY_6) + MATRIX_KEY(3, 0, KEY_VOLUMEUP) + MATRIX_KEY(3, 1, KEY_RIGHT) + MATRIX_KEY(3, 2, KEY_3) + MATRIX_KEY(3, 3, KEY_9) + MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE) + MATRIX_KEY(4, 0, KEY_VOLUMEDOWN) + MATRIX_KEY(4, 1, KEY_BACK) + MATRIX_KEY(4, 2, KEY_CAMERA) + MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; +}; + +&pm8058_led48 { + /* + * The keypad LED @0x48 is routed to + * the sensor board where it is + * connected to an infrared LED + * SFH4650 (60mW, @850nm) next to the + * ambient light and proximity sensor + * Capella Microsystems CM3605. + */ + label = "pm8058:infrared:proximitysensor"; + default-state = "off"; + linux,default-trigger = "cm3605"; + status = "okay"; +}; + +&pm8058_led131 { + label = "pm8058:red"; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + status = "okay"; +}; + +&pm8058_led132 { + /* + * This is actually green too on my + * board, but documented as yellow. + */ + label = "pm8058:yellow"; + color = <LED_COLOR_ID_YELLOW>; + default-state = "off"; + linux,default-trigger = "mmc0"; + status = "okay"; +}; + +&pm8058_led133 { + label = "pm8058:green"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + status = "okay"; +}; + +&pm8058_mpps { + dragon_cm3605_mpps: cm3605-mpps-state { + pins = "mpp5"; + function = "analog"; + input-enable; + bias-high-impedance; + /* Let's use channel 5 */ + qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; + power-source = <PM8058_GPIO_S3>; + }; +}; + +&rpm { + /* + * Set up of the PMIC RPM regulators for this board + * PM8901 supplies "preliminary regulators" whatever + * that means + */ + regulators-0 { + compatible = "qcom,rpm-pm8901-regulators"; + + vdd_l0-supply = <&pm8901_s4>; + vdd_l1-supply = <&vph>; + vdd_l2-supply = <&vph>; + vdd_l3-supply = <&vph>; + vdd_l4-supply = <&vph>; + vdd_l5-supply = <&vph>; + vdd_l6-supply = <&vph>; + /* vdd_s0-supply, vdd_s1-supply: SAW regulators */ + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + lvs0_in-supply = <&pm8058_s3>; + lvs1_in-supply = <&pm8901_s4>; + lvs2_in-supply = <&pm8058_l0>; + lvs3_in-supply = <&pm8058_s2>; + mvs_in-supply = <&pm8058_s3>; + + pm8901_l0: l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8901_l1: l1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8901_l2: l2 { + /* TMA340 requires strictly 3.3V */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8901_l3: l3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8901_l4: l4 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + + pm8901_l5: l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8901_l6: l6 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; + + /* s0 and s1 are SAW regulators controlled over SPM */ + pm8901_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + pm8901_s3: s3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + pm8901_s4: s4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* LVS0 thru 3 and mvs are just switches */ + pm8901_lvs0: lvs0 { + regulator-always-on; + }; + + pm8901_lvs1: lvs1 { }; + + pm8901_lvs2: lvs2 { }; + + pm8901_lvs3: lvs3 { }; + + pm8901_mvs: mvs { }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8058-regulators"; + + vdd_l0_l1_lvs-supply = <&pm8058_s3>; + vdd_l2_l11_l12-supply = <&vph>; + vdd_l3_l4_l5-supply = <&vph>; + vdd_l6_l7-supply = <&vph>; + vdd_l8-supply = <&vph>; + vdd_l9-supply = <&vph>; + vdd_l10-supply = <&vph>; + vdd_l13_l16-supply = <&pm8058_s4>; + vdd_l14_l15-supply = <&vph>; + vdd_l17_l18-supply = <&vph>; + vdd_l19_l20-supply = <&vph>; + vdd_l21-supply = <&pm8058_s3>; + vdd_l22-supply = <&pm8058_s3>; + vdd_l23_l24_l25-supply = <&pm8058_s3>; + vdd_s0-supply = <&vph>; + vdd_s1-supply = <&vph>; + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + vdd_ncp-supply = <&vph>; + + pm8058_l0: l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8058_l1: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8058_l2: l2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + + pm8058_l3: l3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8058_l4: l4 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8058_l5: l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8058_l6: l6 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + + pm8058_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8058_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3050000>; + bias-pull-down; + }; + + pm8058_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8058_l10: l10 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + + pm8058_l11: l11 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + bias-pull-down; + }; + + pm8058_l12: l12 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + bias-pull-down; + }; + + pm8058_l13: l13 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + bias-pull-down; + }; + + pm8058_l14: l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8058_l15: l15 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8058_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + regulator-always-on; + }; + + pm8058_l17: l17 { + // 1.5V according to schematic + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + + pm8058_l18: l18 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; + + pm8058_l19: l19 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + bias-pull-down; + }; + + pm8058_l20: l20 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8058_l21: l21 { + // 1.1 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + regulator-always-on; + }; + + pm8058_l22: l22 { + // 1.2 V according to schematic + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8058_l23: l23 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8058_l24: l24 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8058_l25: l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8058_s0: s0 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1325000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8058_s1: s1 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1250000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8058_s2: s2 { + // 1.3 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8058_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; + }; + + pm8058_s4: s4 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; + }; + + /* LVS0 and LVS1 are just switches */ + pm8058_lvs0: lvs0 { + bias-pull-down; + }; + + pm8058_lvs1: lvs1 { + bias-pull-down; + }; + + pm8058_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; +}; + +/* Internal 3.69 GiB eMMC */ +&sdcc1 { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc1_pins>; + vmmc-supply = <&pm8901_l5>; + vqmmc-supply = <&pm8901_lvs0>; + status = "okay"; +}; + +/* External micro SD card, directly connected, pulled up to 2.85 V */ +&sdcc3 { + /* Enable SSBI GPIO 22 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>; + cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + status = "okay"; +}; + +/* + * Second external micro SD card, using two TXB104RGYR levelshifters + * to lift from 1.8 V to 2.85 V + */ +&sdcc5 { + /* Enable SSBI GPIO 26 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>; + cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + vqmmc-supply = <&dragon_vio_txb>; + status = "okay"; +}; + +&tlmm { + /* eMMC pins, all 8 data lines connected */ + dragon_sdcc1_pins: sdcc1-state { + clk-pins { + pins = "gpio167"; /* SDC1 CLK */ + function = "sdc1"; + drive-strength = <16>; + bias-disable; + }; + cmd-pins { + pins = "gpio168"; /* SDC1 CMD */ + function = "sdc1"; + drive-strength = <10>; + bias-pull-up; + }; + data-pins { + /* SDC1 D0 to D7 */ + pins = "gpio159", "gpio160", "gpio161", "gpio162", + "gpio163", "gpio164", "gpio165", "gpio166"; + function = "sdc1"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + /* + * The SDCC3 pins are hardcoded (non-muxable) but need some pin + * configuration. + */ + dragon_sdcc3_pins: sdcc3-state { + clk-pins { + pins = "sdc3_clk"; + drive-strength = <8>; + bias-disable; + }; + cmd-pins { + pins = "sdc3_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + data-pins { + pins = "sdc3_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + /* Second SD card slot pins */ + dragon_sdcc5_pins: sdcc5-state { + clk-pins { + pins = "gpio97"; /* SDC5 CLK */ + function = "sdc5"; + drive-strength = <16>; + bias-disable; + }; + cmd-pins { + pins = "gpio95"; /* SDC5 CMD */ + function = "sdc5"; + drive-strength = <10>; + bias-pull-up; + }; + data-pins { + /* SDC5 D0 to D3 */ + pins = "gpio96", "gpio98", "gpio99", "gpio100"; + function = "sdc5"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + dragon_gsbi3_i2c_pins: gsbi3-i2c-state { + pins = "gpio43", "gpio44"; + function = "gsbi3"; + drive-strength = <8>; + /* These have external pull-up 2.2kOhm to 1.8V */ + bias-disable; + }; + + dragon_gsbi8_i2c_pins: gsbi8-i2c-state { + pins = "gpio64", "gpio65"; + function = "gsbi8"; + drive-strength = <16>; + /* These have external pull-up 2.2kOhm to 1.8V */ + bias-disable; + }; + + dragon_gsbi12_i2c_pins: gsbi12-i2c-state { + pins = "gpio115", "gpio116"; + function = "gsbi12"; + drive-strength = <16>; + /* These have external pull-up 4.7kOhm to 1.8V */ + bias-disable; + }; + + /* Primary serial port uart 0 pins */ + dragon_gsbi12_serial_pins: gsbi12-serial-state { + tx-pins { + pins = "gpio117"; + function = "gsbi12"; + drive-strength = <8>; + bias-disable; + }; + rx-pins { + pins = "gpio118"; + function = "gsbi12"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + dragon_ebi2_pins: ebi2-state { + /* + * Pins used by EBI2 on the Dragonboard, actually only + * CS2 is used by a real peripheral. CS0 is just + * routed to a test point. + */ + mux0-pins { + pins = + /* "gpio39", CS1A_N this is not good to mux */ + "gpio40", /* CS2A_N */ + "gpio134"; /* CS0_N testpoint TP29 */ + function = "ebi2cs"; + }; + mux1-pins { + pins = + /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */ + "gpio123", "gpio124", "gpio125", "gpio126", + "gpio127", "gpio128", "gpio129", "gpio130", + /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */ + "gpio135", "gpio136", "gpio137", "gpio138", + "gpio139", "gpio140", "gpio141", "gpio142", + "gpio143", "gpio144", "gpio145", "gpio146", + "gpio147", "gpio148", "gpio149", "gpio150", + "gpio151", /* EBI2_OE_N */ + "gpio153", /* EBI2_ADV */ + "gpio157"; /* EBI2_WE_N */ + function = "ebi2"; + }; + }; + + /* Interrupt line for the KXSD9 accelerometer */ + dragon_kxsd9_gpios: kxsd9-state { + pins = "gpio57"; /* IRQ line */ + function = "gpio"; + bias-pull-up; + }; + + dragon_tma340_gpios: tma340-state { + reset-pins { + /* RESET line, TS_ATTN, WAKE_CTP */ + pins = "gpio58"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + irq-pins { + pins = "gpio61"; /* IRQ line */ + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&pm8058_xoadc { + /* Reference voltage 2.2 V */ + xoadc-ref-supply = <&pm8058_l18>; + + /* Board-specific channels */ + adc-channel@5 { + /* Connected to AOUT of ALS sensor */ + reg = <0x00 0x05>; + }; + + adc-channel@6 { + /* Connected to test point TP43 */ + reg = <0x00 0x06>; + }; + + adc-channel@7 { + /* Connected to battery thermistor */ + reg = <0x00 0x07>; + }; + + adc-channel@8 { + /* Connected to battery ID detector */ + reg = <0x00 0x08>; + }; + + adc-channel@9 { + /* Connected to XO thermistor */ + reg = <0x00 0x09>; + }; +}; diff --git a/dts/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts b/dts/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts new file mode 100644 index 0000000000..d460743fbb --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + +/ { + model = "Asus Nexus7(flo)"; + compatible = "asus,nexus7-flo", "qcom,apq8064"; + chassis-type = "tablet"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@88d00000 { + compatible = "ramoops"; + reg = <0x88d00000 0x100000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; + }; + }; + + ext_3p3v: regulator-ext-3p3v { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + key-volume-up { + label = "Volume Up"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEUP>; + }; + key-volume-down { + label = "Volume Down"; + gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + soc { + sram@2a03f000 { + compatible = "qcom,apq8064-imem", "syscon", "simple-mfd"; + reg = <0x2a03f000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; + }; +}; + +&dsi0 { + vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/ + vdd-supply = <&pm8921_l8>; + vddio-supply = <&pm8921_lvs7>; + avdd-supply = <&pm8921_l11>; + status = "okay"; + + panel@0 { + reg = <0>; + compatible = "jdi,lt070me05000"; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_in { + remote-endpoint = <&mdp_dsi1_out>; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/ + status = "okay"; +}; + +&gsbi1 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi1_i2c { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + + bq27541@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; + +}; + +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi3_i2c { + clock-frequency = <200000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + status = "okay"; + + trackpad@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&gsbi6 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi6_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + status = "okay"; +}; + +&gsbi7 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi7_serial { + status = "okay"; +}; + +&mdp { + status = "okay"; +}; + +&mdp_dsi1_out { + remote-endpoint = <&dsi0_in>; +}; + +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vin_lvs2-supply = <&pm8921_s1>; + + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + vdd_ncp-supply = <&pm8921_l6>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + /* msm otg HSUSB_VDDCX */ + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + }; + + /* + * msm_sdcc.1-sdc-vdd_io + * tabla2x-slim-CDC_VDDA_RX + * tabla2x-slim-CDC_VDDA_TX + * tabla2x-slim-CDC_VDD_CP + * tabla2x-slim-VDDIO_CDC + */ + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + /* mipi_dsi.1-dsi1_pll_vdda */ + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* msm_otg-HSUSB_3p3 */ + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + /* msm_otg-HSUSB_1p8 */ + pm8921_l4: l4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* msm_sdcc.1-sdc_vdd */ + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8921_l8: l8 { + }; + + /* mipi_dsi.1-dsi1_avdd */ + pm8921_l11: l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + regulator-always-on; + }; + + /* pwm_power for backlight */ + pm8921_l17: l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + /* camera, qdsp6 */ + pm8921_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* + * tabla2x-slim-CDC_VDDA_A_1P2V + * tabla2x-slim-VDDD_CDC_D + */ + pm8921_l25: l25 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + /* + * mipi_dsi.1-dsi1_vddio + * pil_riva-pll_vdd + */ + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + }; +}; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +/* OTG */ +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-apq8064-cm-qs600.dts b/dts/src/arm/qcom/qcom-apq8064-cm-qs600.dts new file mode 100644 index 0000000000..671d58cc27 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8064-cm-qs600.dts @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + +/ { + model = "CompuLab CM-QS600"; + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sdcc4_pwrseq: pwrseq-sdcc4 { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + + /* on board fixed 3.3v supply */ + v3p3_fixed: regulator-v3p3 { + compatible = "regulator-fixed"; + regulator-name = "PCIE V3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&gsbi1 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi1_i2c { + clock-frequency = <200000>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&gsbi7 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi7_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; + status = "okay"; +}; + +&pcie { + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&v3p3_fixed>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921_gpio { + wlan_default_gpios: wlan-gpios-state { + pinconf { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + }; +}; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + vmmc-supply = <&v3p3_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* WLAN */ +&sdcc4 { + status = "okay"; + vmmc-supply = <&v3p3_fixed>; + vqmmc-supply = <&v3p3_fixed>; + mmc-pwrseq = <&sdcc4_pwrseq>; +}; + +&tlmm_pinmux { + card_detect: card_detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; +}; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb_hs3_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +&usb_hs4_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +/* OTG */ +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usb3 { + dr_mode = "host"; + status = "okay"; +}; + +&usb4 { + dr_mode = "host"; + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-apq8064-ifc6410.dts b/dts/src/arm/qcom/qcom-apq8064-ifc6410.dts new file mode 100644 index 0000000000..ed86b24119 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8064-ifc6410.dts @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + +/ { + model = "Qualcomm APQ8064/IFC6410"; + compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + i2c0 = &gsbi1_i2c; + i2c1 = &gsbi2_i2c; + i2c2 = &gsbi3_i2c; + i2c3 = &gsbi4_i2c; + spi0 = &gsbi5_spi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <¬ify_led>; + + led-user1 { + label = "apq8064:green:user1"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + sdcc4_pwrseq: pwrseq-sdcc4 { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + + ext_3p3v: regulator-ext-3p3v { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&gsbi1 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi1_i2c { + clock-frequency = <200000>; + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi3_i2c { + status = "okay"; +}; + +&gsbi4 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +/* CAM I2C MIPI-CSI connector */ +&gsbi4_i2c { + status = "okay"; +}; + +&gsbi5 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; +}; + +&gsbi5_spi { + num-cs = <1>; + cs-gpios = <&tlmm_pinmux 53 0>; + status = "okay"; +}; + +&gsbi6 { + qcom,mode = <GSBI_PROT_UART_W_FC>; + status = "okay"; +}; + +&gsbi6_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + status = "okay"; +}; + +&gsbi7 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi7_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; + status = "okay"; +}; + +&hdmi { + core-vdda-supply = <&pm8921_hdmi_switch>; + hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&hdmi_in { + remote-endpoint = <&mdp_dtv_out>; +}; + +&hdmi_out { + remote-endpoint = <&hdmi_con>; +}; + +&hdmi_phy { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; +}; + +&mdp { + status = "okay"; +}; + +&mdp_dtv_out { + remote-endpoint = <&hdmi_in>; +}; + +&pcie { + status = "okay"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; +}; + +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921_gpio { + wlan_default_gpios: wlan-gpios-state { + pinconf { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + + notify_led: nled-state { + pinconf { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata0 { + target-supply = <&pm8921_s4>; + status = "okay"; +}; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + vmmc-supply = <&pm8921_l6>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* WLAN */ +&sdcc4 { + vmmc-supply = <&ext_3p3v>; + vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; + status = "okay"; +}; + +&tlmm_pinmux { + card_detect: card_detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; +}; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb_hs3_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +&usb_hs4_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +/* OTG */ +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usb3 { + dr_mode = "host"; + status = "okay"; +}; + +&usb4 { + dr_mode = "host"; + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-apq8064-pins.dtsi b/dts/src/arm/qcom/qcom-apq8064-pins.dtsi new file mode 100644 index 0000000000..7c545c5084 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8064-pins.dtsi @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0 + +&tlmm_pinmux { + sdc4_gpios: sdc4-gpios { + pios { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; + }; + }; + + sdcc1_pins: sdcc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strengh = <16>; + bias-disable; + }; + + cmd { + pins = "sdc1_cmd"; + drive-strengh = <10>; + bias-pull-up; + }; + + data { + pins = "sdc1_data"; + drive-strengh = <10>; + bias-pull-up; + }; + }; + + sdcc3_pins: sdcc3-pin-active { + clk { + pins = "sdc3_clk"; + drive-strengh = <8>; + bias-disable; + }; + + cmd { + pins = "sdc3_cmd"; + drive-strengh = <8>; + bias-pull-up; + }; + + data { + pins = "sdc3_data"; + drive-strengh = <8>; + bias-pull-up; + }; + }; + + ps_hold: ps_hold { + mux { + pins = "gpio78"; + function = "ps_hold"; + }; + }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c1_pins_sleep: i2c1_pins_sleep { + mux { + pins = "gpio20", "gpio21"; + function = "gpio"; + }; + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + gsbi1_uart_2pins: gsbi1_uart_2pins { + mux { + pins = "gpio18", "gpio19"; + function = "gsbi1"; + }; + }; + + gsbi1_uart_4pins: gsbi1_uart_4pins { + mux { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + + i2c2_pins: i2c2 { + mux { + pins = "gpio24", "gpio25"; + function = "gsbi2"; + }; + + pinconf { + pins = "gpio24", "gpio25"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c2_pins_sleep: i2c2_pins_sleep { + mux { + pins = "gpio24", "gpio25"; + function = "gpio"; + }; + + pinconf { + pins = "gpio24", "gpio25"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio8", "gpio9"; + function = "gsbi3"; + }; + + pinconf { + pins = "gpio8", "gpio9"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c3_pins_sleep: i2c3_pins_sleep { + mux { + pins = "gpio8", "gpio9"; + function = "gpio"; + }; + pinconf { + pins = "gpio8", "gpio9"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c4_pins: i2c4 { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + }; + + pinconf { + pins = "gpio12", "gpio13"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c4_pins_sleep: i2c4_pins_sleep { + mux { + pins = "gpio12", "gpio13"; + function = "gpio"; + }; + pinconf { + pins = "gpio12", "gpio13"; + drive-strength = <2>; + bias-disable; + }; + }; + + spi5_default: spi5_default { + pinmux { + pins = "gpio51", "gpio52", "gpio54"; + function = "gsbi5"; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio53"; + }; + + pinconf { + pins = "gpio51", "gpio52", "gpio54"; + drive-strength = <16>; + bias-disable; + }; + + pinconf_cs { + pins = "gpio53"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5_sleep { + pinmux { + function = "gpio"; + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + }; + + pinconf { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + i2c6_pins: i2c6 { + mux { + pins = "gpio16", "gpio17"; + function = "gsbi6"; + }; + + pinconf { + pins = "gpio16", "gpio17"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c6_pins_sleep: i2c6_pins_sleep { + mux { + pins = "gpio16", "gpio17"; + function = "gpio"; + }; + pinconf { + pins = "gpio16", "gpio17"; + drive-strength = <2>; + bias-disable; + }; + }; + + gsbi4_uart_pin_a: gsbi4-uart-pin-active-state { + rx-pins { + pins = "gpio11"; + function = "gsbi4"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio10"; + function = "gsbi4"; + drive-strength = <4>; + bias-disable; + }; + }; + + gsbi6_uart_2pins: gsbi6_uart_2pins { + mux { + pins = "gpio14", "gpio15"; + function = "gsbi6"; + }; + }; + + gsbi6_uart_4pins: gsbi6_uart_4pins { + mux { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gsbi6"; + }; + }; + + gsbi7_uart_2pins: gsbi7_uart_2pins { + mux { + pins = "gpio82", "gpio83"; + function = "gsbi7"; + }; + }; + + gsbi7_uart_4pins: gsbi7_uart_4pins { + mux { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "gsbi7"; + }; + }; + + i2c7_pins: i2c7 { + mux { + pins = "gpio84", "gpio85"; + function = "gsbi7"; + }; + + pinconf { + pins = "gpio84", "gpio85"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c7_pins_sleep: i2c7_pins_sleep { + mux { + pins = "gpio84", "gpio85"; + function = "gpio"; + }; + pinconf { + pins = "gpio84", "gpio85"; + drive-strength = <2>; + bias-disable; + }; + }; + + riva_fm_pin_a: riva-fm-active { + pins = "gpio14", "gpio15"; + function = "riva_fm"; + }; + + riva_bt_pin_a: riva-bt-active { + pins = "gpio16", "gpio17"; + function = "riva_bt"; + }; + + riva_wlan_pin_a: riva-wlan-active { + pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "riva_wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + hdmi_pinctrl: hdmi-pinctrl { + mux { + pins = "gpio70", "gpio71", "gpio72"; + function = "hdmi"; + }; + + pinconf_ddc { + pins = "gpio70", "gpio71"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf_hpd { + pins = "gpio72"; + bias-pull-down; + drive-strength = <16>; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/dts/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts new file mode 100644 index 0000000000..2412aa3e3e --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -0,0 +1,416 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + +/ { + model = "Sony Xperia Z"; + compatible = "sony,xperia-yuga", "qcom,apq8064"; + chassis-type = "handset"; + + aliases { + serial0 = &gsbi5_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + key-volume-down { + label = "volume_down"; + gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; + +&gsbi5 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi5_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi5_uart_pin_a>; + status = "okay"; +}; + +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921_gpio { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio3", "gpio4", "gpio29", "gpio35"; + function = "normal"; + + bias-pull-up; + drive-push-pull; + input-enable; + power-source = <2>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + qcom,pull-up-strength = <0>; + }; +}; + +&riva { + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + + vddcx-supply = <&pm8921_s3>; + vddmx-supply = <&pm8921_l24>; + vddpx-supply = <&pm8921_s4>; + + status = "okay"; + + iris { + vddxo-supply = <&pm8921_l4>; + vddrfa-supply = <&pm8921_s2>; + vddpa-supply = <&pm8921_l10>; + vdddig-supply = <&pm8921_lvs2>; + }; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + + vin_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs_1_3_6-supply = <&pm8921_s4>; + vin_lvs_4_5_7-supply = <&pm8921_s4>; + vin_ncp-supply = <&pm8921_l6>; + vin_lvs2-supply = <&pm8921_s4>; + vin_l24-supply = <&pm8921_s1>; + vin_l25-supply = <&pm8921_s1>; + vin_l27-supply = <&pm8921_s7>; + vin_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + pm8921_s4: s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s8: s8 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + }; + + /* PMOS LDO */ + pm8921_l1: l1 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + bias-pull-down; + }; + + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l8: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + pm8921_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l10: l10 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + bias-pull-down; + }; + + pm8921_l11: l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l12: l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l16: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + pm8921_l17: l17 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + bias-pull-down; + }; + + pm8921_l18: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l21: l21 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l22: l22 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l24: l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8921_l25: l25 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + pm8921_l27: l27 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8921_l28: l28 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l29: l29 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs2: lvs2 { + bias-pull-down; + }; + + pm8921_lvs3: lvs3 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + + pm8921_usb_switch: usb-switch {}; + + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; + + pm8921_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; +}; + +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + +&sdcc3 { + vmmc-supply = <&pm8921_l6>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; + + status = "okay"; +}; + +&tlmm_pinmux { + gsbi5_uart_pin_a: gsbi5-uart-pin-active { + rx { + pins = "gpio52"; + function = "gsbi5"; + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio51"; + function = "gsbi5"; + drive-strength = <4>; + bias-disable; + }; + }; + + + sdcc3_cd_pin_a: sdcc3-cd-pin-active { + pins = "gpio26"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-apq8064-v2.0.dtsi b/dts/src/arm/qcom/qcom-apq8064-v2.0.dtsi new file mode 100644 index 0000000000..46ed48f024 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8064-v2.0.dtsi @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-apq8064.dtsi" diff --git a/dts/src/arm/qcom/qcom-apq8064.dtsi b/dts/src/arm/qcom/qcom-apq8064.dtsi new file mode 100644 index 0000000000..9a5ba97877 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8064.dtsi @@ -0,0 +1,1686 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,lcc-msm8960.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,mmcc-msm8960.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm APQ8064"; + compatible = "qcom,apq8064"; + interrupt-parent = <&intc>; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@80000000 { + reg = <0x80000000 0x200000>; + no-map; + }; + + wcnss_mem: wcnss@8f000000 { + reg = <0x8f000000 0x700000>; + no-map; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; + }; + + CPU1: cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; + }; + + CPU2: cpu@2 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; + }; + + CPU3: cpu@3 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <400>; + exit-latency-us = <900>; + min-residency-us = <3000>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + coefficients = <1199 0>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + coefficients = <1132 0>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + coefficients = <1199 0>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + coefficients = <1132 0>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + clocks { + cxo_board: cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + pxo_board: pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + sfpb_mutex: hwmutex { + compatible = "qcom,sfpb-mutex"; + syscon = <&sfpb_wrapper_mutex 0x604 0x4>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + + hwlocks = <&sfpb_mutex 3>; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&l2cc 8 4>; + qcom,ipc-2 = <&l2cc 8 14>; + qcom,ipc-3 = <&l2cc 8 23>; + qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>; + + apps_smsm: apps@0 { + reg = <0>; + #qcom,smem-state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + q6_smsm: q6@2 { + reg = <2>; + interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@3 { + reg = <3>; + interrupts = <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + dsps_smsm: dsps@4 { + reg = <4>; + interrupts = <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-apq8064", "qcom,scm"; + + clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>; + clock-names = "core"; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + tlmm_pinmux: pinctrl@800000 { + compatible = "qcom,apq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + gpio-ranges = <&tlmm_pinmux 0 0 90>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&ps_hold>; + }; + + sfpb_wrapper_mutex: syscon@1200000 { + compatible = "syscon"; + reg = <0x01200000 0x8000>; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer", + "qcom,msm-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; + }; + + acc2: clock-controller@20a8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu2_aux"; + #clock-cells = <0>; + }; + + acc3: clock-controller@20b8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu3_aux"; + #clock-cells = <0>; + }; + + saw0: power-manager@2089000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + + saw0_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + }; + + saw1: power-manager@2099000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + + saw1_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + }; + + saw2: power-manager@20a9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; + reg = <0x020a9000 0x1000>, <0x02009000 0x1000>; + + saw2_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + }; + + saw3: power-manager@20b9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; + reg = <0x020b9000 0x1000>, <0x02009000 0x1000>; + + saw3_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + }; + + sps_sic_non_secure: sps-sic-non-secure@12100000 { + compatible = "syscon"; + reg = <0x12100000 0x10000>; + }; + + gsbi1: gsbi@12440000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <1>; + reg = <0x12440000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi1_serial: serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi1_i2c: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x12460000 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + }; + + gsbi2: gsbi@12480000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi2_i2c: i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_pins_sleep>; + pinctrl-names = "default", "sleep"; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi3: gsbi@16200000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <3>; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + gsbi3_i2c: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c3_pins>; + pinctrl-1 = <&i2c3_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16280000 0x1000>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI3_QUP_CLK>, + <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi4: gsbi@16300000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x03>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi4_serial: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x100>, + <0x16300000 0x3>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&gsbi4_uart_pin_a>; + pinctrl-names = "default"; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi4_i2c: i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c4_pins>; + pinctrl-1 = <&i2c4_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16380000 0x1000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI4_QUP_CLK>, + <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi5: gsbi@1a200000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x1a200000 0x03>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi5_serial: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x100>, + <0x1a200000 0x03>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi5_spi: spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; + pinctrl-names = "default", "sleep"; + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi6: gsbi@16500000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <6>; + reg = <0x16500000 0x03>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi6_serial: serial@16540000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16540000 0x100>, + <0x16500000 0x03>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c6_pins>; + pinctrl-1 = <&i2c6_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI6_QUP_CLK>, + <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi7: gsbi@16600000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <7>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + syscon-tcsr = <&tcsr>; + + gsbi7_serial: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi7_i2c: i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c7_pins>; + pinctrl-1 = <&i2c7_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16680000 0x1000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI7_QUP_CLK>, + <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + + ssbi2: ssbi@c00000 { + compatible = "qcom,ssbi"; + reg = <0x00c00000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + ssbi: ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + qfprom: qfprom@700000 { + compatible = "qcom,apq8064-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + tsens_calib: calib@404 { + reg = <0x404 0x10>; + }; + tsens_backup: backup_calib@414 { + reg = <0x414 0x10>; + }; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-apq8064", "syscon"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + clocks = <&cxo_board>, + <&pxo_board>, + <&lcc PLL4>; + clock-names = "cxo", "pxo", "pll4"; + + tsens: thermal-sensor { + compatible = "qcom,msm8960-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-apq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, <0>, + <0>, <0>, + <0>; + clock-names = "pxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; + }; + + mmcc: clock-controller@4000000 { + compatible = "qcom,mmcc-apq8064"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL3>, + <&gcc PLL8_VOTE>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 0>, + <&hdmi_phy>; + clock-names = "pxo", + "pll3", + "pll8_vote", + "dsi1pll", + "dsi1pllbyte", + "dsi2pll", + "dsi2pllbyte", + "hdmipll"; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; + }; + + rpm: rpm@108000 { + compatible = "qcom,rpm-apq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; + }; + }; + + usb1: usb@12500000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x200>, + <0x12500200 0x200>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS1_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS1_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs1_phy>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs1_phy: phy { + compatible = "qcom,usb-hs-phy-apq8064", + "qcom,usb-hs-phy"; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb1 0>; + reset-names = "por"; + #phy-cells = <0>; + }; + }; + }; + + usb3: usb@12520000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12520000 0x200>, + <0x12520200 0x200>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS3_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS3_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs3_phy>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs3_phy: phy { + compatible = "qcom,usb-hs-phy-apq8064", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb3 0>; + reset-names = "por"; + }; + }; + }; + + usb4: usb@12530000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12530000 0x200>, + <0x12530200 0x200>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS4_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS4_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs4_phy>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs4_phy: phy { + compatible = "qcom,usb-hs-phy-apq8064", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb4 0>; + reset-names = "por"; + }; + }; + }; + + sata_phy0: phy@1b400000 { + compatible = "qcom,apq8064-sata-phy"; + status = "disabled"; + reg = <0x1b400000 0x200>; + reg-names = "phy_mem"; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + #phy-cells = <0>; + }; + + sata0: sata@29000000 { + compatible = "qcom,apq8064-ahci", "generic-ahci"; + status = "disabled"; + reg = <0x29000000 0x180>; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_iface", + "iface", + "bus", + "rxoob", + "core_pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy0>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + }; + + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc3bam: dma-controller@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc4: mmc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x2000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc4_gpios>; + }; + + sdcc4bam: dma-controller@121c2000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x121c2000 0x8000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC4_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc1: mmc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + pinctrl-names = "default"; + pinctrl-0 = <&sdcc1_pins>; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc1bam: dma-controller@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-apq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; + + gpu: adreno-3xx@4300000 { + compatible = "qcom,adreno-320.2", "qcom,adreno"; + reg = <0x04300000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core", + "iface", + "mem", + "mem_iface"; + clocks = + <&mmcc GFX3D_CLK>, + <&mmcc GFX3D_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>, + <&mmcc MMSS_IMEM_AHB_CLK>; + + iommus = <&gfx3d 0 + &gfx3d 1 + &gfx3d 2 + &gfx3d 3 + &gfx3d 4 + &gfx3d 5 + &gfx3d 6 + &gfx3d 7 + &gfx3d 8 + &gfx3d 9 + &gfx3d 10 + &gfx3d 11 + &gfx3d 12 + &gfx3d 13 + &gfx3d 14 + &gfx3d 15 + &gfx3d 16 + &gfx3d 17 + &gfx3d 18 + &gfx3d 19 + &gfx3d 20 + &gfx3d 21 + &gfx3d 22 + &gfx3d 23 + &gfx3d 24 + &gfx3d 25 + &gfx3d 26 + &gfx3d 27 + &gfx3d 28 + &gfx3d 29 + &gfx3d 30 + &gfx3d 31 + &gfx3d1 0 + &gfx3d1 1 + &gfx3d1 2 + &gfx3d1 3 + &gfx3d1 4 + &gfx3d1 5 + &gfx3d1 6 + &gfx3d1 7 + &gfx3d1 8 + &gfx3d1 9 + &gfx3d1 10 + &gfx3d1 11 + &gfx3d1 12 + &gfx3d1 13 + &gfx3d1 14 + &gfx3d1 15 + &gfx3d1 16 + &gfx3d1 17 + &gfx3d1 18 + &gfx3d1 19 + &gfx3d1 20 + &gfx3d1 21 + &gfx3d1 22 + &gfx3d1 23 + &gfx3d1 24 + &gfx3d1 25 + &gfx3d1 26 + &gfx3d1 27 + &gfx3d1 28 + &gfx3d1 29 + &gfx3d1 30 + &gfx3d1 31>; + + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + + mmss_sfpb: syscon@5700000 { + compatible = "syscon"; + reg = <0x5700000 0x70>; + }; + + dsi0: dsi@4700000 { + compatible = "qcom,apq8064-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x04700000 0x200>; + reg-names = "dsi_ctrl"; + + clocks = <&mmcc DSI_M_AHB_CLK>, + <&mmcc DSI_S_AHB_CLK>, + <&mmcc AMP_AHB_CLK>, + <&mmcc DSI_CLK>, + <&mmcc DSI1_BYTE_CLK>, + <&mmcc DSI_PIXEL_CLK>, + <&mmcc DSI1_ESC_CLK>; + clock-names = "iface", "bus", "core_mmss", + "src", "byte", "pixel", + "core"; + + assigned-clocks = <&mmcc DSI1_BYTE_SRC>, + <&mmcc DSI1_ESC_SRC>, + <&mmcc DSI_SRC>, + <&mmcc DSI_PIXEL_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi0_phy 1>; + syscon-sfpb = <&mmss_sfpb>; + phys = <&dsi0_phy>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + + dsi0_phy: phy@4700200 { + compatible = "qcom,dsi-phy-28nm-8960"; + #clock-cells = <1>; + #phy-cells = <0>; + + reg = <0x04700200 0x100>, + <0x04700300 0x200>, + <0x04700500 0x5c>; + reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; + clock-names = "iface", "ref"; + clocks = <&mmcc DSI_M_AHB_CLK>, + <&pxo_board>; + status = "disabled"; + }; + + dsi1: dsi@5800000 { + compatible = "qcom,mdss-dsi-ctrl"; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x05800000 0x200>; + reg-names = "dsi_ctrl"; + + clocks = <&mmcc DSI2_M_AHB_CLK>, + <&mmcc DSI2_S_AHB_CLK>, + <&mmcc AMP_AHB_CLK>, + <&mmcc DSI2_CLK>, + <&mmcc DSI2_BYTE_CLK>, + <&mmcc DSI2_PIXEL_CLK>, + <&mmcc DSI2_ESC_CLK>; + clock-names = "iface", + "bus", + "core_mmss", + "src", + "byte", + "pixel", + "core"; + + assigned-clocks = <&mmcc DSI2_BYTE_SRC>, + <&mmcc DSI2_ESC_SRC>, + <&mmcc DSI2_SRC>, + <&mmcc DSI2_PIXEL_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 1>; + + syscon-sfpb = <&mmss_sfpb>; + phys = <&dsi1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + + dsi1_phy: dsi-phy@5800200 { + compatible = "qcom,dsi-phy-28nm-8960"; + reg = <0x05800200 0x100>, + <0x05800300 0x200>, + <0x05800500 0x5c>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + clock-names = "iface", + "ref"; + clocks = <&mmcc DSI2_M_AHB_CLK>, + <&pxo_board>; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdp_port0: iommu@7500000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg = <0x07500000 0x100000>; + interrupts = + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + qcom,ncb = <2>; + }; + + mdp_port1: iommu@7600000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg = <0x07600000 0x100000>; + interrupts = + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + qcom,ncb = <2>; + }; + + gfx3d: iommu@7c00000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>; + reg = <0x07c00000 0x100000>; + interrupts = + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + qcom,ncb = <3>; + }; + + gfx3d1: iommu@7d00000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>; + reg = <0x07d00000 0x100000>; + interrupts = + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + qcom,ncb = <3>; + }; + + pcie: pcie@1b500000 { + compatible = "qcom,pcie-apq8064"; + reg = <0x1b500000 0x1000>, + <0x1b502000 0x80>, + <0x1b600000 0x100>, + <0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */ + <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */ + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_REF_CLK>; + clock-names = "core", "iface", "phy"; + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + status = "disabled"; + }; + + hdmi: hdmi-tx@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pinctrl>; + reg = <0x04a00000 0x2f0>; + reg-names = "core_physical"; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc HDMI_APP_CLK>, + <&mmcc HDMI_M_AHB_CLK>, + <&mmcc HDMI_S_AHB_CLK>; + clock-names = "core", + "master_iface", + "slave_iface"; + + phys = <&hdmi_phy>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + hdmi_out: endpoint { + }; + }; + }; + }; + + hdmi_phy: phy@4a00400 { + compatible = "qcom,hdmi-phy-8960"; + reg = <0x4a00400 0x60>, + <0x4a00500 0x100>; + reg-names = "hdmi_phy", + "hdmi_pll"; + + clocks = <&mmcc HDMI_S_AHB_CLK>; + clock-names = "slave_iface"; + #phy-cells = <0>; + #clock-cells = <0>; + + status = "disabled"; + }; + + mdp: display-controller@5100000 { + compatible = "qcom,mdp4"; + reg = <0x05100000 0xf0000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc MDP_CLK>, + <&mmcc MDP_AHB_CLK>, + <&mmcc MDP_AXI_CLK>, + <&mmcc MDP_LUT_CLK>, + <&mmcc HDMI_TV_CLK>, + <&mmcc MDP_TV_CLK>; + clock-names = "core_clk", + "iface_clk", + "bus_clk", + "lut_clk", + "hdmi_clk", + "tv_clk"; + + iommus = <&mdp_port0 0 + &mdp_port0 2 + &mdp_port1 0 + &mdp_port1 2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp_lvds_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + mdp_dsi1_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + mdp_dsi2_out: endpoint { + }; + }; + + port@3 { + reg = <3>; + mdp_dtv_out: endpoint { + }; + }; + }; + }; + + riva: riva-pil@3200800 { + compatible = "qcom,riva-pil"; + + reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>; + reg-names = "ccu", "dxe", "pmu"; + + interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal"; + + memory-region = <&wcnss_mem>; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3660"; + + clocks = <&cxo_board>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&l2cc 8 25>; + qcom,smd-edge = <6>; + + label = "riva"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&riva>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; + }; + + etb@1a01000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x1a01000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; + }; + }; + }; + + tpiu@1a03000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x1a03000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-static-replicator"; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&funnel_out>; + }; + }; + }; + }; + + funnel@1a04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x1a04000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 2 - connected to STM component + * 3 - not-connected + * 6 - not-connected + * 7 - not-connected + */ + port@0 { + reg = <0>; + funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@4 { + reg = <4>; + funnel_in4: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@5 { + reg = <5>; + funnel_in5: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + funnel_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etm@1a1c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1c000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in0>; + }; + }; + }; + }; + + etm@1a1d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1d000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in1>; + }; + }; + }; + }; + + etm@1a1e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1e000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in4>; + }; + }; + }; + }; + + etm@1a1f000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1f000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in5>; + }; + }; + }; + }; + }; +}; +#include "qcom-apq8064-pins.dtsi" diff --git a/dts/src/arm/qcom/qcom-apq8074-dragonboard.dts b/dts/src/arm/qcom/qcom-apq8074-dragonboard.dts new file mode 100644 index 0000000000..6fce011236 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8074-dragonboard.dts @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-msm8974.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" + +/delete-node/ &mpss_region; + +/ { + model = "Qualcomm APQ8074 Dragonboard"; + compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; + + aliases { + serial0 = &blsp1_uart2; + usid0 = &pm8941_0; + usid4 = &pm8841_0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-0 = <&msm_keys_default>; + pinctrl-names = "default"; + + button-volup { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + }; + + button-general { + label = "General"; + linux,code = <KEY_PROG1>; + gpios = <&pm8941_gpios 23 GPIO_ACTIVE_LOW>; + }; + }; + + reserved-memory { + mpss_region: mpss@ac00000 { + reg = <0x0ac00000 0x2500000>; + no-map; + }; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <200000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_l22>; + vddio-supply = <&pm8941_l12>; + + status = "okay"; + + panel: panel@0 { + compatible = "sharp,ls043t1le01-qhd"; + reg = <0>; + + avdd-supply = <&pm8941_l22>; + backlight = <&pm8941_wled>; + reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + + vddio-supply = <&pm8941_l12>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8941_gpios { + msm_keys_default: pm8941-gpio-keys-state { + pins = "gpio5", "gpio23"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8941_GPIO_S3>; /* 1.8V */ + }; +}; + +&pm8941_lpg { + qcom,power-source = <1>; + status = "okay"; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + }; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + }; +}; + +&pm8941_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8941_wled { + qcom,cs-out; + qcom,switching-freq = <3200>; + qcom,ovp = <32>; + qcom,num-strings = <1>; + + status = "okay"; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + + firmware-name = "qcom/apq8074/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + + firmware-name = "qcom/apq8074/mba.mbn", "qcom/apq8074/modem.mbn"; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + status = "okay"; +}; + +&tlmm { + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd-pins { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; + +&usb { + status = "okay"; + + phys = <&usb_hs2_phy>; + phy-select = <&tcsr 0xb000 1>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs2_phy { + status = "okay"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; +}; diff --git a/dts/src/arm/qcom/qcom-apq8084-ifc6540.dts b/dts/src/arm/qcom/qcom-apq8084-ifc6540.dts new file mode 100644 index 0000000000..1df24c922b --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8084-ifc6540.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-apq8084.dtsi" +#include "pma8084.dtsi" + +/ { + model = "Qualcomm APQ8084/IFC6540"; + compatible = "qcom,apq8084-sbc", "qcom,apq8084"; + + aliases { + serial0 = &blsp2_uart2; + usid0 = &pma8084_0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + serial@f995e000 { + status = "okay"; + }; + }; +}; + +&sdhc_1 { + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; + bus-width = <4>; +}; diff --git a/dts/src/arm/qcom/qcom-apq8084-mtp.dts b/dts/src/arm/qcom/qcom-apq8084-mtp.dts new file mode 100644 index 0000000000..d4e6aee034 --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8084-mtp.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-apq8084.dtsi" +#include "pma8084.dtsi" + +/ { + model = "Qualcomm APQ 8084-MTP"; + compatible = "qcom,apq8084-mtp", "qcom,apq8084"; + + aliases { + serial0 = &blsp2_uart2; + usid0 = &pma8084_0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + serial@f995e000 { + status = "okay"; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-apq8084.dtsi b/dts/src/arm/qcom/qcom-apq8084.dtsi new file mode 100644 index 0000000000..8204e64d9a --- /dev/null +++ b/dts/src/arm/qcom/qcom-apq8084.dtsi @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-apq8084.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm APQ 8084"; + compatible = "qcom,apq8084"; + interrupt-parent = <&intc>; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_mem: smem_region@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <0>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <1>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <2>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <3>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + qcom,saw = <&saw_l2>; + }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + firmware { + scm { + compatible = "qcom,scm-apq8084", "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 7 0xf04>; + }; + + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; + clock-frequency = <19200000>; + }; + + smem { + compatible = "qcom,smem"; + + qcom,rpm-msg-ram = <&rpm_msg_ram>; + memory-region = <&smem_mem>; + + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + + sram@fc190000 { + compatible = "qcom,apq8084-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + + qfprom: qfprom@fc4bc000 { + compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@d0 { + reg = <0xd0 0x1>; + bits = <0 8>; + }; + + tsens_s0_p1: s0-p1@d1 { + reg = <0xd1 0x1>; + bits = <0 6>; + }; + + tsens_s1_p1: s1-p1@d2 { + reg = <0xd1 0x2>; + bits = <6 6>; + }; + + tsens_s2_p1: s2-p1@d2 { + reg = <0xd2 0x2>; + bits = <4 6>; + }; + + tsens_s3_p1: s3-p1@d3 { + reg = <0xd3 0x1>; + bits = <2 6>; + }; + + tsens_s4_p1: s4-p1@d4 { + reg = <0xd4 0x1>; + bits = <0 6>; + }; + + tsens_s5_p1: s5-p1@d4 { + reg = <0xd4 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@d5 { + reg = <0xd5 0x2>; + bits = <4 6>; + }; + + tsens_s7_p1: s7-p1@d6 { + reg = <0xd6 0x1>; + bits = <2 6>; + }; + + tsens_s8_p1: s8-p1@d7 { + reg = <0xd7 0x1>; + bits = <0 6>; + }; + + tsens_mode: mode@d7 { + reg = <0xd7 0x1>; + bits = <6 2>; + }; + + tsens_s9_p1: s9-p1@d8 { + reg = <0xd8 0x1>; + bits = <0 6>; + }; + + tsens_s10_p1: s10_p1@d8 { + reg = <0xd8 0x2>; + bits = <6 6>; + }; + + tsens_base2: base2@d9 { + reg = <0xd9 0x2>; + bits = <4 8>; + }; + + tsens_s0_p2: s0-p2@da { + reg = <0xda 0x2>; + bits = <4 6>; + }; + + tsens_s1_p2: s1-p2@db { + reg = <0xdb 0x1>; + bits = <2 6>; + }; + + tsens_s2_p2: s2-p2@dc { + reg = <0xdc 0x1>; + bits = <0 6>; + }; + + tsens_s3_p2: s3-p2@dc { + reg = <0xdc 0x2>; + bits = <6 6>; + }; + + tsens_s4_p2: s4-p2@dd { + reg = <0xdd 0x2>; + bits = <4 6>; + }; + + tsens_s5_p2: s5-p2@de { + reg = <0xde 0x2>; + bits = <2 6>; + }; + + tsens_s6_p2: s6-p2@df { + reg = <0xdf 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@e0 { + reg = <0xe0 0x1>; + bits = <0 6>; + }; + + tsens_s8_p2: s8-p2@e0 { + reg = <0xe0 0x2>; + bits = <6 6>; + }; + + tsens_s9_p2: s9-p2@e1 { + reg = <0xe1 0x2>; + bits = <4 6>; + }; + + tsens_s10_p2: s10_p2@e2 { + reg = <0xe2 0x2>; + bits = <2 6>; + }; + + tsens_s5_p2_backup: s5-p2_backup@e3 { + reg = <0xe3 0x2>; + bits = <0 6>; + }; + + tsens_mode_backup: mode_backup@e3 { + reg = <0xe3 0x1>; + bits = <6 2>; + }; + + tsens_s6_p2_backup: s6-p2_backup@e4 { + reg = <0xe4 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2_backup: s7-p2_backup@e4 { + reg = <0xe4 0x2>; + bits = <6 6>; + }; + + tsens_s8_p2_backup: s8-p2_backup@e5 { + reg = <0xe5 0x2>; + bits = <4 6>; + }; + + tsens_s9_p2_backup: s9-p2_backup@e6 { + reg = <0xe6 0x2>; + bits = <2 6>; + }; + + tsens_s10_p2_backup: s10_p2_backup@e7 { + reg = <0xe7 0x1>; + bits = <0 6>; + }; + + tsens_base1_backup: base1_backup@440 { + reg = <0x440 0x1>; + bits = <0 8>; + }; + + tsens_s0_p1_backup: s0-p1_backup@441 { + reg = <0x441 0x1>; + bits = <0 6>; + }; + + tsens_s1_p1_backup: s1-p1_backup@442 { + reg = <0x441 0x2>; + bits = <6 6>; + }; + + tsens_s2_p1_backup: s2-p1_backup@442 { + reg = <0x442 0x2>; + bits = <4 6>; + }; + + tsens_s3_p1_backup: s3-p1_backup@443 { + reg = <0x443 0x1>; + bits = <2 6>; + }; + + tsens_s4_p1_backup: s4-p1_backup@444 { + reg = <0x444 0x1>; + bits = <0 6>; + }; + + tsens_s5_p1_backup: s5-p1_backup@444 { + reg = <0x444 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1_backup: s6-p1_backup@445 { + reg = <0x445 0x2>; + bits = <4 6>; + }; + + tsens_s7_p1_backup: s7-p1_backup@446 { + reg = <0x446 0x1>; + bits = <2 6>; + }; + + tsens_use_backup: use_backup@447 { + reg = <0x447 0x1>; + bits = <5 3>; + }; + + tsens_s8_p1_backup: s8-p1_backup@448 { + reg = <0x448 0x1>; + bits = <0 6>; + }; + + tsens_s9_p1_backup: s9-p1_backup@448 { + reg = <0x448 0x2>; + bits = <6 6>; + }; + + tsens_s10_p1_backup: s10_p1_backup@449 { + reg = <0x449 0x2>; + bits = <4 6>; + }; + + tsens_base2_backup: base2_backup@44a { + reg = <0x44a 0x2>; + bits = <2 8>; + }; + + tsens_s0_p2_backup: s0-p2_backup@44b { + reg = <0x44b 0x3>; + bits = <2 6>; + }; + + tsens_s1_p2_backup: s1-p2_backup@44c { + reg = <0x44c 0x1>; + bits = <0 6>; + }; + + tsens_s2_p2_backup: s2-p2_backup@44c { + reg = <0x44c 0x2>; + bits = <6 6>; + }; + + tsens_s3_p2_backup: s3-p2_backup@44d { + reg = <0x44d 0x2>; + bits = <4 6>; + }; + + tsens_s4_p2_backup: s4-p2_backup@44e { + reg = <0x44e 0x1>; + bits = <2 6>; + }; + }; + + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_use_backup>, + <&tsens_mode_backup>, + <&tsens_base1_backup>, <&tsens_base2_backup>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>, + <&tsens_s10_p1>, <&tsens_s10_p2>, + <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>, + <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>, + <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>, + <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>, + <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>, + <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>, + <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>, + <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>, + <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>, + <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>, + <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>; + nvmem-cell-names = "mode", + "base1", "base2", + "use_backup", + "mode_backup", + "base1_backup", "base2_backup", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2", + "s10_p1", "s10_p2", + "s0_p1_backup", "s0_p2_backup", + "s1_p1_backup", "s1_p2_backup", + "s2_p1_backup", "s2_p2_backup", + "s3_p1_backup", "s3_p2_backup", + "s4_p1_backup", "s4_p2_backup", + "s5_p1_backup", "s5_p2_backup", + "s6_p1_backup", "s6_p2_backup", + "s7_p1_backup", "s7_p2_backup", + "s8_p1_backup", "s8_p2_backup", + "s9_p1_backup", "s9_p2_backup", + "s10_p1_backup", "s10_p2_backup"; + #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + clock-frequency = <19200000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + saw0: power-manager@f9089000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + + saw1: power-manager@f9099000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + + saw2: power-manager@f90a9000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw3: power-manager@f90b9000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw_l2: power-manager@f9012000 { + compatible = "qcom,apq8084-saw2-v2.1-l2", "qcom,saw2"; + reg = <0xf9012000 0x1000>; + }; + + acc0: power-manager@f9088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9088000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc1: power-manager@f9098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9098000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc2: power-manager@f90a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90a8000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc3: power-manager@f90b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90b8000 0x1000>, + <0xf9008000 0x1000>; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-apq8084"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, /* ufs */ + <0>, + <0>, + <0>, + <0>, /* sata */ + <0>, + <0>; /* pcie */ + clock-names = "xo", + "sleep_clk", + "ufs_rx_symbol_0_clk_src", + "ufs_rx_symbol_1_clk_src", + "ufs_tx_symbol_0_clk_src", + "ufs_tx_symbol_1_clk_src", + "sata_asic0_clk", + "sata_rx_clk", + "pcie_pipe"; + }; + + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; + #hwlock-cells = <1>; + }; + + rpm_msg_ram: sram@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,apq8084-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 147>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + }; + + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhc_1: mmc@f9824900 { + compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc", "core"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + status = "disabled"; + }; + + sdhc_2: mmc@f98a4900 { + compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc", "core"; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + status = "disabled"; + }; + + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + }; + + rpm: remoteproc { + compatible = "qcom,apq8084-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-apq8084"; + qcom,smd-channels = "rpm_requests"; + + regulators-0 { + compatible = "qcom,rpm-pma8084-regulators"; + + pma8084_s1: s1 {}; + pma8084_s2: s2 {}; + pma8084_s3: s3 {}; + pma8084_s4: s4 {}; + pma8084_s5: s5 {}; + pma8084_s6: s6 {}; + pma8084_s7: s7 {}; + pma8084_s8: s8 {}; + pma8084_s9: s9 {}; + pma8084_s10: s10 {}; + pma8084_s11: s11 {}; + pma8084_s12: s12 {}; + + pma8084_l1: l1 {}; + pma8084_l2: l2 {}; + pma8084_l3: l3 {}; + pma8084_l4: l4 {}; + pma8084_l5: l5 {}; + pma8084_l6: l6 {}; + pma8084_l7: l7 {}; + pma8084_l8: l8 {}; + pma8084_l9: l9 {}; + pma8084_l10: l10 {}; + pma8084_l11: l11 {}; + pma8084_l12: l12 {}; + pma8084_l13: l13 {}; + pma8084_l14: l14 {}; + pma8084_l15: l15 {}; + pma8084_l16: l16 {}; + pma8084_l17: l17 {}; + pma8084_l18: l18 {}; + pma8084_l19: l19 {}; + pma8084_l20: l20 {}; + pma8084_l21: l21 {}; + pma8084_l22: l22 {}; + pma8084_l23: l23 {}; + pma8084_l24: l24 {}; + pma8084_l25: l25 {}; + pma8084_l26: l26 {}; + pma8084_l27: l27 {}; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; + }; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4018-ap120c-ac-bit.dts b/dts/src/arm/qcom/qcom-ipq4018-ap120c-ac-bit.dts new file mode 100644 index 0000000000..1b27edce9d --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4018-ap120c-ac-bit.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/leds/common.h> +#include "qcom-ipq4018-ap120c-ac.dtsi" + +/ { + model = "ALFA Network AP120C-AC Bit"; + + leds { + compatible = "gpio-leds"; + + led-power { + label = "ap120c-ac:green:power"; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-wlan { + label = "ap120c-ac:green:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + led-support { + label = "ap120c-ac:green:support"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4018-ap120c-ac.dts b/dts/src/arm/qcom/qcom-ipq4018-ap120c-ac.dts new file mode 100644 index 0000000000..a707057c88 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4018-ap120c-ac.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/leds/common.h> +#include "qcom-ipq4018-ap120c-ac.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + + status: led-status { + label = "ap120c-ac:blue:status"; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + led-wlan2g { + label = "ap120c-ac:green:wlan2g"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + led-wlan5g { + label = "ap120c-ac:red:wlan5g"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_RED>; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4018-ap120c-ac.dtsi b/dts/src/arm/qcom/qcom-ipq4018-ap120c-ac.dtsi new file mode 100644 index 0000000000..da67d55fa5 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4018-ap120c-ac.dtsi @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "ALFA Network AP120C-AC"; + compatible = "alfa-network,ap120c-ac", "qcom,ipq4018"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&tlmm { + i2c0_pins: i2c0_pinmux { + mux_i2c { + function = "blsp_i2c0"; + pins = "gpio58", "gpio59"; + drive-strength = <16>; + bias-disable; + }; + }; + + mdio_pins: mdio_pinmux { + mux_mdio { + pins = "gpio53"; + function = "mdio"; + bias-pull-up; + }; + + mux_mdc { + pins = "gpio52"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial0_pins: serial0_pinmux { + mux_uart { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi0_pins: spi0_pinmux { + mux_spi { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54", "gpio4"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + usb-power-hog { + line-name = "USB-power"; + gpios = <1 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; +}; + +&watchdog { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_i2c3 { + status = "okay"; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + tpm@29 { + compatible = "atmel,at97sc3204t"; + reg = <0x29>; + }; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x000e0000 0x00010000>; + }; + + partition@f0000 { + label = "u-boot"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; + }; + + partition@180000 { + label = "priv_data1"; + reg = <0x00180000 0x00010000>; + read-only; + }; + + partition@190000 { + label = "priv_data2"; + reg = <0x00190000 0x00010000>; + read-only; + }; + }; + }; + + flash@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x04000000>; + }; + + partition@4000000 { + label = "ubi2"; + reg = <0x04000000 0x04000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial0_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&wifi0 { + status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; +}; + +&wifi1 { + status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; + qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3 { + status = "okay"; + + }; + +&usb3_dwc { + phys = <&usb3_hs_phy>; + phy-names = "usb2-phy"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4018-jalapeno.dts b/dts/src/arm/qcom/qcom-ipq4018-jalapeno.dts new file mode 100644 index 0000000000..365fbac417 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4018-jalapeno.dts @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (c) 2018, Robert Marko <robimarko@gmail.com> + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "8devices Jalapeno"; + compatible = "8dev,jalapeno", "qcom,ipq4018"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + pinmux_1 { + pins = "gpio53"; + function = "mdio"; + }; + + pinmux_2 { + pins = "gpio52"; + function = "mdc"; + }; + + pinconf { + pins = "gpio52", "gpio53"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <2>; + bias-disable; + }; + + pin_cs { + function = "gpio"; + pins = "gpio54", "gpio59"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; + + flash@0 { + status = "okay"; + + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x000e0000 0x00010000>; + }; + + partition@f0000 { + label = "u-boot"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + }; + }; + + spi-nand@1 { + status = "okay"; + + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x04000000>; + }; + + partition@4000000 { + label = "ubi2"; + reg = <0x04000000 0x04000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&wifi0 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Jalapeno"; +}; + +&wifi1 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Jalapeno"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4019-ap.dk01.1-c1.dts b/dts/src/arm/qcom/qcom-ipq4019-ap.dk01.1-c1.dts new file mode 100644 index 0000000000..ddaa273f72 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4019-ap.dk01.1-c1.dts @@ -0,0 +1,22 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019-ap.dk01.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; + compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/dts/src/arm/qcom/qcom-ipq4019-ap.dk01.1.dtsi new file mode 100644 index 0000000000..f7ac8f9d0b --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4019-ap.dk01.1.dtsi @@ -0,0 +1,109 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <dt-bindings/gpio/gpio.h> +#include "qcom-ipq4019.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&prng { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio54"; + }; + pinconf { + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <24000000>; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi0 { + status = "okay"; +}; + +&wifi1 { + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4019-ap.dk04.1-c1.dts b/dts/src/arm/qcom/qcom-ipq4019-ap.dk04.1-c1.dts new file mode 100644 index 0000000000..0993f840d1 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4019-ap.dk04.1-c1.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk04.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1"; + compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019"; + + soc { + dma-controller@7984000 { + status = "okay"; + }; + }; +}; + +&nand { + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4019-ap.dk04.1-c3.dts b/dts/src/arm/qcom/qcom-ipq4019-ap.dk04.1-c3.dts new file mode 100644 index 0000000000..7765247125 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4019-ap.dk04.1-c3.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk04.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3"; + compatible = "qcom,ipq4019-ap-dk04.1-c3", "qcom,ipq4019"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/dts/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi new file mode 100644 index 0000000000..374af6dd36 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; + + aliases { + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256MB */ + }; + + soc { + pinctrl@1000000 { + serial_0_pins: serial0-pinmux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + + serial_1_pins: serial1-pinmux { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + function = "blsp_uart1"; + bias-disable; + }; + + spi_0_pins: spi-0-pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + bias-disable; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + bias-disable; + output-high; + }; + }; + + i2c_0_pins: i2c-0-pinmux { + pins = "gpio20", "gpio21"; + function = "blsp_i2c0"; + bias-disable; + }; + + nand_pins: nand-pins { + pins = "gpio53", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", + "gpio60", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68", "gpio69"; + function = "qpic"; + }; + }; + + serial@78af000 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + dma-controller@7884000 { + status = "okay"; + }; + + spi@78b5000 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "micron,n25q128a11", "jedec,spi-nor"; + spi-max-frequency = <24000000>; + }; + }; + + pcie@40000000 { + status = "okay"; + perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4019-ap.dk07.1-c1.dts b/dts/src/arm/qcom/qcom-ipq4019-ap.dk07.1-c1.dts new file mode 100644 index 0000000000..ea2987fcbf --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4019-ap.dk07.1-c1.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include <dt-bindings/gpio/gpio.h> +#include "qcom-ipq4019-ap.dk07.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; + compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019"; + + soc { + pci@40000000 { + status = "okay"; + perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + }; + + spi@78b6000 { + status = "okay"; + }; + + pinctrl@1000000 { + serial_1_pins: serial1-pinmux { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + function = "blsp_uart1"; + bias-disable; + }; + + spi_0_pins: spi-0-pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + bias-disable; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + bias-disable; + output-high; + }; + }; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + spi@78b5000 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "micron,n25q128a11", "jedec,spi-nor"; + spi-max-frequency = <24000000>; + }; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4019-ap.dk07.1-c2.dts b/dts/src/arm/qcom/qcom-ipq4019-ap.dk07.1-c2.dts new file mode 100644 index 0000000000..bd3553dd20 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4019-ap.dk07.1-c2.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk07.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2"; + compatible = "qcom,ipq4019-ap-dk07.1-c2", "qcom,ipq4019"; + + soc { + pinctrl@1000000 { + serial_1_pins: serial1-pinmux { + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4019-ap.dk07.1.dtsi b/dts/src/arm/qcom/qcom-ipq4019-ap.dk07.1.dtsi new file mode 100644 index 0000000000..7ef635997e --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4019-ap.dk07.1.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MB */ + }; + + aliases { + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + pinctrl@1000000 { + serial_0_pins: serial0-pinmux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + + i2c_0_pins: i2c-0-pinmux { + pins = "gpio20", "gpio21"; + function = "blsp_i2c0"; + bias-disable; + }; + + nand_pins: nand-pins { + pins = "gpio53", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", + "gpio60", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68", "gpio69"; + function = "qpic"; + }; + }; + + serial@78af000 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + dma-controller@7884000 { + status = "okay"; + }; + + i2c@78b7000 { /* BLSP1 QUP2 */ + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + dma-controller@7984000 { + status = "okay"; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq4019.dtsi b/dts/src/arm/qcom/qcom-ipq4019.dtsi new file mode 100644 index 0000000000..681cb3fc80 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq4019.dtsi @@ -0,0 +1,696 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/clock/qcom,gcc-ipq4019.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + model = "Qualcomm Technologies, Inc. IPQ4019"; + compatible = "qcom,ipq4019"; + interrupt-parent = <&intc>; + + reserved-memory { + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + + smem_region: smem@87e00000 { + reg = <0x87e00000 0x080000>; + no-map; + }; + + tz@87e80000 { + reg = <0x87e80000 0x180000>; + no-map; + }; + }; + + aliases { + spi0 = &blsp1_spi1; + spi1 = &blsp1_spi2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp1_i2c4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + reg = <0x0>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; + clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + reg = <0x1>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; + clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + reg = <0x2>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; + clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + reg = <0x3>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; + clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + qcom,saw = <&saw_l2>; + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-48000000 { + opp-hz = /bits/ 64 <48000000>; + clock-latency-ns = <256000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + clock-latency-ns = <256000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <256000>; + }; + opp-716000000 { + opp-hz = /bits/ 64 <716000000>; + clock-latency-ns = <256000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq4019", "qcom,scm"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <48000000>; + always-on; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq4019"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x1800000 0x60000>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; + }; + + prng: rng@22000 { + compatible = "qcom,prng"; + reg = <0x22000 0x140>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + status = "disabled"; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq4019-pinctrl"; + reg = <0x01000000 0x300000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 100>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + }; + + vqmmc: regulator@1948000 { + compatible = "qcom,vqmmc-ipq4019-regulator"; + reg = <0x01948000 0x4>; + regulator-name = "vqmmc"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + status = "disabled"; + }; + + sdhci: mmc@7824900 { + compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x11c>, <0x7824000 0x800>; + reg-names = "hc", "core"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + bus-width = <8>; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo>; + clock-names = "iface", + "core", + "xo"; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */ + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x78b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */ + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x78b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */ + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */ + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + cryptobam: dma-controller@8e04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x08e04000 0x20000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + status = "disabled"; + }; + + crypto: crypto@8e3a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x08e3a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + acc0: power-manager@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; + }; + + acc1: power-manager@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; + }; + + acc2: power-manager@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; + }; + + acc3: power-manager@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; + }; + + saw0: power-manager@b089000 { + compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; + }; + + saw1: power-manager@b099000 { + compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; + }; + + saw2: power-manager@b0a9000 { + compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; + }; + + saw3: power-manager@b0b9000 { + compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; + }; + + saw_l2: power-manager@b012000 { + compatible = "qcom,ipq4019-saw2-l2", "qcom,saw2"; + reg = <0xb012000 0x1000>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + }; + + watchdog: watchdog@b017000 { + compatible = "qcom,kpss-wdt-ipq4019", "qcom,kpss-wdt"; + reg = <0xb017000 0x40>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + status = "disabled"; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x4ab000 0x4>; + }; + + pcie0: pcie@40000000 { + compatible = "qcom,pcie-ipq4019"; + reg = <0x40000000 0xf1d>, + <0x40000f20 0xa8>, + <0x80000 0x2000>, + <0x40100000 0x1000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>, + <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc GCC_PCIE_AHB_CLK>, + <&gcc GCC_PCIE_AXI_M_CLK>, + <&gcc GCC_PCIE_AXI_S_CLK>; + clock-names = "aux", + "master_bus", + "slave_bus"; + + resets = <&gcc PCIE_AXI_M_ARES>, + <&gcc PCIE_AXI_S_ARES>, + <&gcc PCIE_PIPE_ARES>, + <&gcc PCIE_AXI_M_VMIDMT_ARES>, + <&gcc PCIE_AXI_S_XPU_ARES>, + <&gcc PCIE_PARF_XPU_ARES>, + <&gcc PCIE_PHY_ARES>, + <&gcc PCIE_AXI_M_STICKY_ARES>, + <&gcc PCIE_PIPE_STICKY_ARES>, + <&gcc PCIE_PWR_ARES>, + <&gcc PCIE_AHB_ARES>, + <&gcc PCIE_PHY_AHB_ARES>; + reset-names = "axi_m", + "axi_s", + "pipe", + "axi_m_vmid", + "axi_s_xpu", + "parf", + "phy", + "axi_m_sticky", + "pipe_sticky", + "pwr", + "ahb", + "phy_ahb"; + + status = "disabled"; + }; + + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x7984000 0x1a000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + nand: nand-controller@79b0000 { + compatible = "qcom,ipq4019-nand"; + reg = <0x79b0000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; + }; + + wifi0: wifi@a000000 { + compatible = "qcom,ipq4019-wifi"; + reg = <0xa000000 0x200000>; + resets = <&gcc WIFI0_CPU_INIT_RESET>, + <&gcc WIFI0_RADIO_SRIF_RESET>, + <&gcc WIFI0_RADIO_WARM_RESET>, + <&gcc WIFI0_RADIO_COLD_RESET>, + <&gcc WIFI0_CORE_WARM_RESET>, + <&gcc WIFI0_CORE_COLD_RESET>; + reset-names = "wifi_cpu_init", "wifi_radio_srif", + "wifi_radio_warm", "wifi_radio_cold", + "wifi_core_warm", "wifi_core_cold"; + clocks = <&gcc GCC_WCSS2G_CLK>, + <&gcc GCC_WCSS2G_REF_CLK>, + <&gcc GCC_WCSS2G_RTC_CLK>; + clock-names = "wifi_wcss_cmd", "wifi_wcss_ref", + "wifi_wcss_rtc"; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7", + "msi8", "msi9", "msi10", "msi11", + "msi12", "msi13", "msi14", "msi15", + "legacy"; + status = "disabled"; + }; + + wifi1: wifi@a800000 { + compatible = "qcom,ipq4019-wifi"; + reg = <0xa800000 0x200000>; + resets = <&gcc WIFI1_CPU_INIT_RESET>, + <&gcc WIFI1_RADIO_SRIF_RESET>, + <&gcc WIFI1_RADIO_WARM_RESET>, + <&gcc WIFI1_RADIO_COLD_RESET>, + <&gcc WIFI1_CORE_WARM_RESET>, + <&gcc WIFI1_CORE_COLD_RESET>; + reset-names = "wifi_cpu_init", "wifi_radio_srif", + "wifi_radio_warm", "wifi_radio_cold", + "wifi_core_warm", "wifi_core_cold"; + clocks = <&gcc GCC_WCSS5G_CLK>, + <&gcc GCC_WCSS5G_REF_CLK>, + <&gcc GCC_WCSS5G_RTC_CLK>; + clock-names = "wifi_wcss_cmd", "wifi_wcss_ref", + "wifi_wcss_rtc"; + interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7", + "msi8", "msi9", "msi10", "msi11", + "msi12", "msi13", "msi14", "msi15", + "legacy"; + status = "disabled"; + }; + + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq4019-mdio"; + reg = <0x90000 0x64>; + status = "disabled"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + + ethphy4: ethernet-phy@4 { + reg = <4>; + }; + }; + + usb3_ss_phy: usb-phy@9a000 { + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; + reg = <0x9a000 0x800>; + reg-names = "phy_base"; + resets = <&gcc USB3_UNIPHY_PHY_ARES>; + reset-names = "por_rst"; + status = "disabled"; + }; + + usb3_hs_phy: usb-phy@a6000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa6000 0x40>; + reg-names = "phy_base"; + resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb3: usb@8af8800 { + compatible = "qcom,ipq4019-dwc3", "qcom,dwc3"; + reg = <0x8af8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB3_MASTER_CLK>, + <&gcc GCC_USB3_SLEEP_CLK>, + <&gcc GCC_USB3_MOCK_UTMI_CLK>; + clock-names = "core", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + usb3_dwc: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xf8000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_hs_phy>, <&usb3_ss_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + }; + }; + + usb2_hs_phy: usb-phy@a8000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa8000 0x40>; + reg-names = "phy_base"; + resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb2: usb@60f8800 { + compatible = "qcom,ipq4019-dwc3", "qcom,dwc3"; + reg = <0x60f8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB2_MASTER_CLK>, + <&gcc GCC_USB2_SLEEP_CLK>, + <&gcc GCC_USB2_MOCK_UTMI_CLK>; + clock-names = "core", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + usb@6000000 { + compatible = "snps,dwc3"; + reg = <0x6000000 0xf8000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_hs_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + }; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8062-smb208.dtsi b/dts/src/arm/qcom/qcom-ipq8062-smb208.dtsi new file mode 100644 index 0000000000..9d06255104 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8062-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "qcom-ipq8062.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8062.dtsi b/dts/src/arm/qcom/qcom-ipq8062.dtsi new file mode 100644 index 0000000000..5d3ebd3e2e --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8062.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "qcom-ipq8064-v2.0.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8062"; + compatible = "qcom,ipq8062", "qcom,ipq8064"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8064-ap148.dts b/dts/src/arm/qcom/qcom-ipq8064-ap148.dts new file mode 100644 index 0000000000..a654d3c22c --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8064-ap148.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + + soc { + pinmux@800000 { + buttons_pins: buttons_pins { + mux { + pins = "gpio54", "gpio65"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + gsbi@16300000 { + i2c@16380000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8064-rb3011.dts b/dts/src/arm/qcom/qcom-ipq8064-rb3011.dts new file mode 100644 index 0000000000..12e806adcd --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8064-rb3011.dts @@ -0,0 +1,472 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-ipq8064.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "MikroTik RB3011UiAS-RM"; + compatible = "mikrotik,rb3011", "qcom,ipq8064"; + + aliases { + serial0 = &gsbi7_serial; + ethernet0 = &gmac0; + ethernet1 = &gmac3; + mdio-gpio0 = &mdio0; + mdio-gpio1 = &mdio1; + }; + + chosen { + bootargs = "loglevel=8 console=ttyMSM0,115200"; + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led-0 { + label = "rb3011:green:user"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + memory@42000000 { + reg = <0x42000000 0x3e000000>; + device_type = "memory"; + }; + + mdio0: mdio-0 { + status = "okay"; + compatible = "virtual,mdio-gpio"; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + switch0: switch@10 { + compatible = "qca,qca8337"; + + dsa,member = <0 0>; + + pinctrl-0 = <&sw0_reset_pin>; + pinctrl-names = "default"; + + reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch0cpu: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "sw1"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + port@2 { + reg = <2>; + label = "sw2"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + port@3 { + reg = <3>; + label = "sw3"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + port@4 { + reg = <4>; + label = "sw4"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + port@5 { + reg = <5>; + label = "sw5"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + }; + }; + }; + + mdio1: mdio-1 { + status = "okay"; + compatible = "virtual,mdio-gpio"; + gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 10 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + + switch1: switch@14 { + compatible = "qca,qca8337"; + + dsa,member = <1 0>; + + pinctrl-0 = <&sw1_reset_pin>; + pinctrl-names = "default"; + + reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch1cpu: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac3>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "sw6"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + port@2 { + reg = <2>; + label = "sw7"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + port@3 { + reg = <3>; + label = "sw8"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + port@4 { + reg = <4>; + label = "sw9"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + + port@5 { + reg = <5>; + label = "sw10"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; + }; + }; + }; + + soc { + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + norflash: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "RouterBoot"; + reg = <0x0 0x40000>; + }; + }; + }; + }; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + qcom,id = <0>; + phy-handle = <&switch0cpu>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac3 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <3>; + phy-handle = <&switch1cpu>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gsbi7 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C_UART>; +}; + +&gsbi7_serial { + status = "okay"; +}; + +&hs_phy_1 { + status = "okay"; +}; + +&nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "RouterBoard NAND 1 Boot"; + reg = <0x0000000 0x0800000>; + }; + + main@800000 { + label = "RouterBoard NAND 1 Main"; + reg = <0x0800000 0x7800000>; + }; + }; + }; +}; + +&qcom_pinmux { + buttons_pins: buttons_pins { + mux { + pins = "gpio66"; + drive-strength = <16>; + bias-disable; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio33"; + drive-strength = <16>; + bias-disable; + }; + }; + + mdio1_pins: mdio1_pins { + mux { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + sw0_reset_pin: sw0_reset_pin { + mux { + pins = "gpio16"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; + }; + }; + + sw1_reset_pin: sw1_reset_pin { + mux { + pins = "gpio17"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio4"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; +}; + +&ss_phy_1 { + status = "okay"; +}; + +&usb3_1 { + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8064-smb208.dtsi b/dts/src/arm/qcom/qcom-ipq8064-smb208.dtsi new file mode 100644 index 0000000000..ac9c44f0c1 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8064-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8064-v1.0.dtsi b/dts/src/arm/qcom/qcom-ipq8064-v1.0.dtsi new file mode 100644 index 0000000000..49de975263 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8064-v1.0.dtsi @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-ipq8064.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064-v1.0"; + + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button-1 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + button-2 { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led-0 { + label = "led_usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led-1 { + label = "led_usb3"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led-2 { + label = "status_led_fail"; + function = LED_FUNCTION_STATUS; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + label = "sata_led"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + label = "status_led_pass"; + function = LED_FUNCTION_STATUS; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + soc { + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + + serial@16340000 { + status = "okay"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: flash@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "rootfs"; + reg = <0x0 0x1000000>; + }; + + partition@1 { + label = "scratch"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + ports-implemented = <0x1>; + status = "okay"; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8064-v2.0-smb208.dtsi b/dts/src/arm/qcom/qcom-ipq8064-v2.0-smb208.dtsi new file mode 100644 index 0000000000..0442580b22 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8064-v2.0-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064-v2.0.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8064-v2.0.dtsi b/dts/src/arm/qcom/qcom-ipq8064-v2.0.dtsi new file mode 100644 index 0000000000..2f117d576d --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8064-v2.0.dtsi @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064-v2.0"; + + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; +}; + +&gsbi4 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; + + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ +}; + +&pcie0 { + compatible = "qcom,pcie-ipq8064-v2"; +}; + +&pcie1 { + compatible = "qcom,pcie-ipq8064-v2"; +}; + +&pcie2 { + compatible = "qcom,pcie-ipq8064-v2"; +}; + +&sata { + ports-implemented = <0x1>; +}; + +&ss_phy_0 { + qcom,rx-eq = <2>; + qcom,tx-deamp_3_5db = <32>; + qcom,mpll = <5>; +}; + +&ss_phy_1 { + qcom,rx-eq = <2>; + qcom,tx-deamp_3_5db = <32>; + qcom,mpll = <5>; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8064.dtsi b/dts/src/arm/qcom/qcom-ipq8064.dtsi new file mode 100644 index 0000000000..2eb6758b6a --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8064.dtsi @@ -0,0 +1,1373 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/clock/qcom,gcc-ipq806x.h> +#include <dt-bindings/clock/qcom,lcc-ipq806x.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/qcom,gcc-ipq806x.h> +#include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm IPQ8064"; + compatible = "qcom,ipq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu1: cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + thermal-zones { + sensor0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 0>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 1>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 2>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor5-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 5>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor6-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 6>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor7-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 7>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor8-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 8>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor9-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 9>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + sensor10-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 10>; + + trips { + cpu-critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu-hot { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nss@40000000 { + reg = <0x40000000 0x1000000>; + no-map; + }; + + smem: smem@41000000 { + compatible = "qcom,smem"; + reg = <0x41000000 0x200000>; + no-map; + + hwlocks = <&sfpb_mutex 3>; + }; + }; + + clocks { + cxo_board: cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + pxo_board: pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq806x", "qcom,scm"; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <7>; + snps,rd_osr_lmt = <7>; + snps,blen = <16 0 0 0 0 0 0>; + }; + + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + rpm: rpm@108000 { + compatible = "qcom,rpm-ipq8064"; + reg = <0x00108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ack", "err", "wakeup"; + + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + + ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + qfprom: qfprom@700000 { + compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + speedbin_efuse: speedbin@c0 { + reg = <0xc0 0x4>; + }; + tsens_calib: calib@400 { + reg = <0x400 0xb>; + }; + tsens_calib_backup: calib_backup@410 { + reg = <0x410 0xb>; + }; + }; + + qcom_pinmux: pinmux@800000 { + compatible = "qcom,ipq8064-pinctrl"; + reg = <0x00800000 0x4000>; + + gpio-controller; + gpio-ranges = <&qcom_pinmux 0 0 69>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + i2c4_pins: i2c4-default { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", + "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + }; + + buttons_pins: buttons_pins { + mux { + pins = "gpio54"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", + "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + function = "nand"; + drive-strength = <10>; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-bus-hold; + }; + }; + + mdio0_pins: mdio0-pins { + mux { + pins = "gpio0", "gpio1"; + function = "mdio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2-pins { + mux { + pins = "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", + "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064", "syscon"; + clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>; + clock-names = "pxo", "cxo", "pll4"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + tsens: thermal-sensor { + compatible = "qcom,ipq8064-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; + + sfpb_mutex: hwlock@1200600 { + compatible = "qcom,sfpb-mutex"; + reg = <0x01200600 0x100>; + + #hwlock-cells = <1>; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer", + "qcom,msm-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + reg = <0x0200a000 0x100>; + clock-frequency = <25000000>; + clocks = <&sleep_clk>; + clock-names = "sleep"; + cpu-offset = <0x80000>; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon"; + reg = <0x02011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; + }; + + saw0: power-manager@2089000 { + compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; + }; + + saw1: power-manager@2099000 { + compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + }; + + nss_common: syscon@3000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; + }; + + usb3_0: usb@100f8800 { + compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x100f8800 0x8000>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_0_MASTER_RESET>; + + status = "disabled"; + + dwc3_0: usb@10000000 { + compatible = "snps,dwc3"; + reg = <0x10000000 0xcd00>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hs_phy_0>, <&ss_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + hs_phy_0: phy@100f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x100f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + ss_phy_0: phy@100f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x100f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + usb3_1: usb@110f8800 { + compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x110f8800 0x8000>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_1_MASTER_RESET>; + + status = "disabled"; + + dwc3_1: usb@11000000 { + compatible = "snps,dwc3"; + reg = <0x11000000 0xcd00>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hs_phy_1>, <&ss_phy_1>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + hs_phy_1: phy@110f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x110f8800 0x30>; + clocks = <&gcc USB30_1_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + ss_phy_1: phy@110f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x110f8830 0x30>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + sdcc3bam: dma-controller@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc1bam: dma-controller@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba: amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + sd-uhs-sdr104; + sd-uhs-ddr50; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc1: mmc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + }; + + gsbi1: gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi1_serial: serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + + status = "disabled"; + }; + + gsbi1_i2c: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + gsbi2_serial: serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi2_i2c: i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + gsbi4_serial: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi6: gsbi@16500000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16500000 0x100>; + cell-index = <6>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + gsbi6_spi: spi@16580000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gsbi7: gsbi@16600000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <7>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + syscon-tcsr = <&tcsr>; + + gsbi7_serial: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi7_i2c: i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16680000 0x1000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + adm_dma: dma-controller@18300000 { + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc ADM0_RESET>, + <&gcc ADM0_PBUS_RESET>, + <&gcc ADM0_C0_RESET>, + <&gcc ADM0_C1_RESET>, + <&gcc ADM0_C2_RESET>; + reset-names = "clk", "pbus", "c0", "c1", "c2"; + qcom,ee = <0>; + + status = "disabled"; + }; + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + gsbi5_serial: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-ipq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + + nand: nand-controller@1ac00000 { + compatible = "qcom,ipq806x-nand"; + reg = <0x1ac00000 0x800>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; + + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + status = "disabled"; + }; + + pcie0: pcie@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */ + + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>, + <&gcc PCIE_AUX_CLK>, + <&gcc PCIE_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>, + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + }; + + pcie1: pcie@1b700000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b700000 0x1000 + 0x1b702000 0x80 + 0x1b800000 0x100 + 0x31f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */ + + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_1_A_CLK>, + <&gcc PCIE_1_H_CLK>, + <&gcc PCIE_1_PHY_CLK>, + <&gcc PCIE_1_AUX_CLK>, + <&gcc PCIE_1_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_1_ACLK_RESET>, + <&gcc PCIE_1_HCLK_RESET>, + <&gcc PCIE_1_POR_RESET>, + <&gcc PCIE_1_PCI_RESET>, + <&gcc PCIE_1_PHY_RESET>, + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + }; + + pcie2: pcie@1b900000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b900000 0x1000 + 0x1b902000 0x80 + 0x1ba00000 0x100 + 0x35f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */ + + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_2_A_CLK>, + <&gcc PCIE_2_H_CLK>, + <&gcc PCIE_2_PHY_CLK>, + <&gcc PCIE_2_AUX_CLK>, + <&gcc PCIE_2_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_2_ACLK_RESET>, + <&gcc PCIE_2_HCLK_RESET>, + <&gcc PCIE_2_POR_RESET>, + <&gcc PCIE_2_PCI_RESET>, + <&gcc PCIE_2_PHY_RESET>, + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + }; + + qsgmii_csr: syscon@1bb00000 { + compatible = "syscon"; + reg = <0x1bb00000 0x000001FF>; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + }; + + sata: sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_face", "iface", "core", + "rxoob", "pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + gmac0: ethernet@37000000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; + reg = <0x37000000 0x200000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE1_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE1_RESET>, + <&gcc GMAC_AHB_RESET>; + reset-names = "stmmaceth", "ahb"; + + status = "disabled"; + }; + + gmac1: ethernet@37200000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; + reg = <0x37200000 0x200000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE2_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE2_RESET>, + <&gcc GMAC_AHB_RESET>; + reset-names = "stmmaceth", "ahb"; + + status = "disabled"; + }; + + gmac2: ethernet@37400000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; + reg = <0x37400000 0x200000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE3_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE3_RESET>, + <&gcc GMAC_AHB_RESET>; + reset-names = "stmmaceth", "ahb"; + + status = "disabled"; + }; + + gmac3: ethernet@37600000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; + reg = <0x37600000 0x200000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE4_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE4_RESET>, + <&gcc GMAC_AHB_RESET>; + reset-names = "stmmaceth", "ahb"; + + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8065-smb208.dtsi b/dts/src/arm/qcom/qcom-ipq8065-smb208.dtsi new file mode 100644 index 0000000000..803e6ff99e --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8065-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8065.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-ipq8065.dtsi b/dts/src/arm/qcom/qcom-ipq8065.dtsi new file mode 100644 index 0000000000..ea49f6cc41 --- /dev/null +++ b/dts/src/arm/qcom/qcom-ipq8065.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064-v2.0.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8065"; + compatible = "qcom,ipq8065", "qcom,ipq8064"; +}; diff --git a/dts/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/dts/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts new file mode 100644 index 0000000000..e3b4b93c3d --- /dev/null +++ b/dts/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Device Tree Source for mangOH Green Board with WP8548 Module + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "qcom-mdm9615-wp8548.dtsi" + +/ { + model = "MangOH Green with WP8548 Module"; + compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615"; + + aliases { + spi0 = &gsbi3_spi; + serial0 = &gsbi4_serial; + serial1 = &gsbi5_serial; + i2c0 = &gsbi5_i2c; + mmc0 = &sdcc1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&msmgpio { + /* MangOH GPIO Mapping : + * - 2 : GPIOEXP_INT2 + * - 7 : IOT1_GPIO2 + * - 8 : IOT0_GPIO4 + * - 13: IOT0_GPIO3 + * - 21: IOT1_GPIO4 + * - 22: IOT2_GPIO1 + * - 23: IOT2_GPIO2 + * - 24: IOT2_GPIO3 + * - 25: IOT1_GPIO1 + * - 32: IOT1_GPIO3 + * - 33: IOT0_GPIO2 + * - 42: IOT0_GPIO1 and SD Card Detect + */ + + gpioext1_pins: gpioext1-state { + gpioext1-pins { + pins = "gpio2"; + function = "gpio"; + bias-disable; + }; + }; + + sdc_cd_pins: sdc-cd-state { + sdc-cd-pins { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&gsbi3_spi { + spi@0 { + compatible = "swir,mangoh-iotport-spi"; + spi-max-frequency = <24000000>; + reg = <0>; + }; +}; + +&gsbi5_i2c { + mux@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + i2c_iot0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_iot1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_iot2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + usbhub: hub@8 { + compatible = "smsc,usb3503a"; + reg = <0x8>; + connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>; + intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>; + initial-mode = <1>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpioext0: pinctrl@3e { + /* GPIO Expander 0 Mapping : + * - 0: ARDUINO_RESET_Level shift + * - 1: BattChrgr_PG_N + * - 2: BattGauge_GPIO + * - 3: LED_ON (out active high) + * - 4: ATmega_reset_GPIO + * - 5: X + * - 6: PCM_ANALOG_SELECT (out active high) + * - 7: X + * - 8: Board_rev_res1 (in) + * - 9: Board_rev_res2 (in) + * - 10: UART_EXP1_ENn (out active low / pull-down) + * - 11: UART_EXP1_IN (out pull-down) + * - 12: UART_EXP2_IN (out pull-down) + * - 13: SDIO_SEL (out pull-down) + * - 14: SPI_EXP1_ENn (out active low / pull-down) + * - 15: SPI_EXP1_IN (out pull-down) + */ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1509q"; + reg = <0x3e>; + interrupt-parent = <&gpioext1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + semtech,probe-reset; + + gpio-controller; + interrupt-controller; + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + gpioext1: pinctrl@3f { + /* GPIO Expander 1 Mapping : + * - 0: GPIOEXP_INT1 + * - 1: Battery detect + * - 2: GPIO_SCF3_RESET + * - 3: LED_CARD_DETECT_IOT0 (in) + * - 4: LED_CARD_DETECT_IOT1 (in) + * - 5: LED_CARD_DETECT_IOT2 (in) + * - 6: UIM2_PWM_SELECT + * - 7: UIM2_M2_S_SELECT + * - 8: TP900 + * - 9: SENSOR_INT1 (in) + * - 10: SENSOR_INT2 (in) + * - 11: CARD_DETECT_IOT0 (in pull-up) + * - 12: CARD_DETECT_IOT2 (in pull-up) + * - 13: CARD_DETECT_IOT1 (in pull-up) + * - 14: GPIOEXP_INT3 (in active low / pull-up) + * - 15: BattChrgr_INT_N + */ + pinctrl-0 = <&gpioext1_pins>; + pinctrl-names = "default"; + + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1509q"; + reg = <0x3f>; + interrupt-parent = <&msmgpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + semtech,probe-reset; + + gpio-controller; + interrupt-controller; + }; + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + gpioext2: pinctrl@70 { + /* GPIO Expander 2 Mapping : + * - 0: USB_HUB_INTn + * - 1: HUB_CONNECT + * - 2: GPIO_IOT2_RESET (out active low / pull-up) + * - 3: GPIO_IOT1_RESET (out active low / pull-up) + * - 4: GPIO_IOT0_RESET (out active low / pull-up) + * - 5: TP901 + * - 6: TP902 + * - 7: TP903 + * - 8: UART_EXP2_ENn (out active low / pull-down) + * - 9: PCM_EXP1_ENn (out active low) + * - 10: PCM_EXP1_SEL (out) + * - 11: ARD_FTDI + * - 12: TP904 + * - 13: TP905 + * - 14: TP906 + * - 15: RS232_Enable (out active high / pull-up) + */ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1509q"; + reg = <0x70>; + interrupt-parent = <&gpioext1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + semtech,probe-reset; + + gpio-controller; + interrupt-controller; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&sdcc1 { + pinctrl-0 = <&sdc_cd_pins>; + pinctrl-names = "default"; + disable-wp; + cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */ +}; diff --git a/dts/src/arm/qcom/qcom-mdm9615-wp8548.dtsi b/dts/src/arm/qcom/qcom-mdm9615-wp8548.dtsi new file mode 100644 index 0000000000..0dd52cac0e --- /dev/null +++ b/dts/src/arm/qcom/qcom-mdm9615-wp8548.dtsi @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Device Tree Source for Sierra Wireless WP8548 Module + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "qcom-mdm9615.dtsi" +#include "pm8018.dtsi" + +/ { + model = "Sierra Wireless WP8548 Module"; + compatible = "swir,wp8548", "qcom,mdm9615"; + + memory@48000000 { + device_type = "memory"; + reg = <0x48000000 0x7F00000>; + }; +}; + +&msmgpio { + pinctrl-0 = <&reset_out_pins>; + pinctrl-names = "default"; + + gsbi3_pins: gsbi3-state { + gsbi3-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + }; + + gsbi4_pins: gsbi4-state { + gsbi4-pins { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gsbi4"; + drive-strength = <8>; + bias-disable; + }; + }; + + gsbi5_i2c_pins: gsbi5-i2c-state { + sda-pins { + pins = "gpio16"; + function = "gsbi5_i2c"; + drive-strength = <8>; + bias-disable; + }; + + scl-pins { + pins = "gpio17"; + function = "gsbi5_i2c"; + drive-strength = <2>; + bias-disable; + }; + }; + + gsbi5_uart_pins: gsbi5-uart-state { + gsbi5-uart-pins { + pins = "gpio18", "gpio19"; + function = "gsbi5_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + reset_out_pins: reset-out-state { + reset-out-pins { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; + }; +}; + +&pm8018 { + interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pm8018_gpio { + usb_vbus_5v_pins: usb-vbus-5v-state { + pins = "gpio4"; + function = "normal"; + output-high; + bias-disable; + qcom,drive-strength = <1>; + power-source = <2>; + }; +}; + +&gsbi3 { + status = "okay"; + qcom,mode = <GSBI_PROT_SPI>; +}; + +&gsbi3_spi { + status = "okay"; + pinctrl-0 = <&gsbi3_pins>; + pinctrl-names = "default"; + assigned-clocks = <&gcc GSBI3_QUP_CLK>; + assigned-clock-rates = <24000000>; +}; + +&gsbi4 { + status = "okay"; + qcom,mode = <GSBI_PROT_UART_W_FC>; +}; + +&gsbi4_serial { + status = "okay"; + pinctrl-0 = <&gsbi4_pins>; + pinctrl-names = "default"; +}; + +&gsbi5 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C_UART>; +}; + +&gsbi5_i2c { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&gsbi5_i2c_pins>; + pinctrl-names = "default"; +}; + +&gsbi5_serial { + status = "okay"; + pinctrl-0 = <&gsbi5_uart_pins>; + pinctrl-names = "default"; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8018-regulators"; + + vin_lvs1-supply = <&pm8018_s3>; + + vdd_l7-supply = <&pm8018_s4>; + vdd_l8-supply = <&pm8018_s3>; + vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; + + /* Buck SMPS */ + pm8018_s1: s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s2: s2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s3: s3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s4: s4 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s5: s5 { + regulator-always-on; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8018_l2: l2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l3: l3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l4: l4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8018_l5: l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8018_l8: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8018_l9: l9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8018_l10: l10 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l11: l11 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l12: l12 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l13: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8018_l14: l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8018_lvs1: lvs1 { + bias-pull-down; + }; + }; +}; + +&sdcc1 { + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-mdm9615.dtsi b/dts/src/arm/qcom/qcom-mdm9615.dtsi new file mode 100644 index 0000000000..34c60994d0 --- /dev/null +++ b/dts/src/arm/qcom/qcom-mdm9615.dtsi @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Device Tree Source for Qualcomm MDM9615 SoC + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-mdm9615.h> +#include <dt-bindings/clock/qcom,lcc-msm8960.h> +#include <dt-bindings/reset/qcom,gcc-mdm9615.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm MDM9615"; + compatible = "qcom,mdm9615"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a5"; + reg = <0>; + device_type = "cpu"; + next-level-cache = <&L2>; + }; + }; + + cpu-pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + clocks { + cxo_board: cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + }; + + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + L2: cache-controller@2040000 { + compatible = "arm,pl310-cache"; + reg = <0x02040000 0x1000>; + arm,data-latency = <2 2 0>; + cache-unified; + cache-level = <2>; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-wdt-mdm9615", "qcom,kpss-timer", + "qcom,msm-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>; + cpu-offset = <0x80000>; + }; + + msmgpio: pinctrl@800000 { + compatible = "qcom,mdm9615-pinctrl"; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 88>; + #gpio-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-mdm9615"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + clocks = <&cxo_board>, + <&lcc PLL4>; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-mdm9615"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&cxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, <0>, + <0>, <0>, + <0>; + clock-names = "cxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon"; + reg = <0x02011000 0x1000>; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + assigned-clocks = <&gcc PRNG_CLK>; + assigned-clock-rates = <32000000>; + }; + + gsbi2: gsbi@16100000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; + reg = <0x16100000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi2_i2c: i2c@16180000 { + compatible = "qcom,i2c-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16180000 0x1000>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi3: gsbi@16200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <3>; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi3_spi: spi@16280000 { + compatible = "qcom,spi-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16280000 0x1000>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi4_serial: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x16400000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi5_i2c: i2c@16480000 { + compatible = "qcom,i2c-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16480000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + + /* QUP clock is not initialized, set rate */ + assigned-clocks = <&gcc GSBI5_QUP_CLK>; + assigned-clock-rates = <24000000>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi5_serial: serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + ssbi: ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + sdcc1bam: dma-controller@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc2bam: dma-controller@12142000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12142000 0x8000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC2_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc1: mmc@12180000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + assigned-clocks = <&gcc SDC1_CLK>; + assigned-clock-rates = <400000>; + }; + + sdcc2: mmc@12140000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12140000 0x2000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc2bam 2>, <&sdcc2bam 1>; + dma-names = "tx", "rx"; + assigned-clocks = <&gcc SDC2_CLK>; + assigned-clock-rates = <400000>; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-mdm9615", "syscon"; + reg = <0x1a400000 0x100>; + }; + + rpm: rpm@108000 { + compatible = "qcom,rpm-mdm9615"; + reg = <0x108000 0x1000>; + + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi b/dts/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi new file mode 100644 index 0000000000..525d8c608b --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common Board Device Tree for Microsoft MSM8x26-based Lumias + * + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" +#include <dt-bindings/input/input.h> + +/* + * Delete all generic (msm8226.dtsi) reserved + * memory mappings which are different on these devices. + */ +/delete-node/ &smem_region; + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* microSD */ + display0 = &framebuffer; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x3200000 0x800000>; + format = "a8r8g8b8"; + width = <720>; + height = <1280>; + stride = <(720 * 4)>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + /* + * This device being a WP platform has a different + * memory layout than other Android based devices. + * This smem memory region is directly copied from + * the original UEFI firmware. + */ + reserved-memory { + display_reserved: framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + /* These values were taken from the original firmware DSDT */ + pm8226_s1: s1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8226_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2075000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <3000000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio106", "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + touchscreen_default: touchscreen-default-state { + irq-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-msm8226-microsoft-dempsey.dts b/dts/src/arm/qcom/qcom-msm8226-microsoft-dempsey.dts new file mode 100644 index 0000000000..2c664b5934 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8226-microsoft-dempsey.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Microsoft Lumia 640"; + compatible = "microsoft,dempsey", "qcom,msm8226"; + chassis-type = "handset"; +}; diff --git a/dts/src/arm/qcom/qcom-msm8226-microsoft-makepeace.dts b/dts/src/arm/qcom/qcom-msm8226-microsoft-makepeace.dts new file mode 100644 index 0000000000..731c5c3756 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8226-microsoft-makepeace.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Microsoft Lumia 640 XL"; + compatible = "microsoft,makepeace", "qcom,msm8226"; + chassis-type = "handset"; +}; diff --git a/dts/src/arm/qcom/qcom-msm8226-microsoft-moneypenny.dts b/dts/src/arm/qcom/qcom-msm8226-microsoft-moneypenny.dts new file mode 100644 index 0000000000..992b7115b5 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8226-microsoft-moneypenny.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Nokia Lumia 630"; + compatible = "microsoft,moneypenny", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&framebuffer { + width = <480>; + height = <854>; + stride = <(480 * 4)>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8226-samsung-matisse-common.dtsi b/dts/src/arm/qcom/qcom-msm8226-samsung-matisse-common.dtsi new file mode 100644 index 0000000000..a15a44fc01 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8226-samsung-matisse-common.dtsi @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> + */ + +#include <dt-bindings/input/input.h> +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + display0 = &framebuffer0; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <1280>; + height = <800>; + stride = <(1280 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 110 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + key-home { + label = "Home"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-backlight { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&backlight_i2c_default_state>; + pinctrl-names = "default"; + + i2c-gpio,delay-us = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + + dev-ctrl = /bits/ 8 <0x80>; + init-brt = /bits/ 8 <0x3f>; + + pwms = <&backlight_pwm 0 100000>; + pwm-names = "lp8556"; + + rom-a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0x44>; + }; + + rom-a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x6c>; + }; + + rom-a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x24>; + }; + }; + }; + + backlight_pwm: pwm { + compatible = "clk-pwm"; + #pwm-cells = <2>; + clocks = <&mmcc CAMSS_GP0_CLK>; + pinctrl-0 = <&backlight_pwm_default_state>; + pinctrl-names = "default"; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default_state>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + mpss@8400000 { + reg = <0x08400000 0x1f00000>; + no-map; + }; + + mba@a300000 { + reg = <0x0a300000 0x100000>; + no-map; + }; + + reserved@cb00000 { + reg = <0x0cb00000 0x700000>; + no-map; + }; + + wcnss@d200000 { + reg = <0x0d200000 0x700000>; + no-map; + }; + + adsp_region: adsp@d900000 { + reg = <0x0d900000 0x1800000>; + no-map; + }; + + venus@f100000 { + reg = <0x0f100000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + reserved@fb00000 { + reg = <0x0fb00000 0x260000>; + no-map; + }; + + rfsa@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; +}; + +&adsp { + status = "okay"; +}; + +&blsp1_i2c4 { + status = "okay"; + + muic: usb-switch@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + + interrupt-parent = <&tlmm>; + interrupts = <67 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default_state>; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&tlmm { + accel_int_default_state: accel-int-default-state { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_i2c_default_state: backlight-i2c-default-state { + pins = "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_pwm_default_state: backlight-pwm-default-state { + pins = "gpio33"; + function = "gp0_clk"; + }; + + muic_int_default_state: muic-int-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default_state: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default_state: tsp-int-rst-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8226-samsung-s3ve3g.dts b/dts/src/arm/qcom/qcom-msm8226-samsung-s3ve3g.dts new file mode 100644 index 0000000000..288cacd5d1 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8226-samsung-s3ve3g.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "qcom-msm8226.dtsi" + +/ { + model = "Samsung Galaxy S III Neo"; + compatible = "samsung,s3ve3g", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-msm8226.dtsi b/dts/src/arm/qcom/qcom-msm8226.dtsi new file mode 100644 index 0000000000..270973e856 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8226.dtsi @@ -0,0 +1,1210 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/reset/qcom,gcc-msm8974.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + chosen { }; + + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + compatible = "arm,cortex-a7"; + enable-method = "qcom,msm8226-smp"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + CPU1: cpu@1 { + compatible = "arm,cortex-a7"; + enable-method = "qcom,msm8226-smp"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + CPU2: cpu@2 { + compatible = "arm,cortex-a7"; + enable-method = "qcom,msm8226-smp"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + }; + + CPU3: cpu@3 { + compatible = "arm,cortex-a7"; + enable-method = "qcom,msm8226-smp"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8226", "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + rpm: remoteproc { + compatible = "qcom,msm8226-rpm-proc", "qcom,rpm-proc"; + + master-stats { + compatible = "qcom,rpm-master-stats"; + qcom,rpm-msg-ram = <&apss_master_stats>, + <&mpss_master_stats>, + <&lpss_master_stats>, + <&pronto_master_stats>; + qcom,master-names = "APSS", + "MPSS", + "LPSS", + "PRONTO"; + }; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8226"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8226", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8226-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@3000000 { + reg = <0x3000000 0x100000>; + no-map; + }; + + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + + saw_l2: power-manager@f9012000 { + compatible = "qcom,msm8226-saw2-v2.1-l2", "qcom,saw2"; + reg = <0xf9012000 0x1000>; + }; + + watchdog@f9017000 { + compatible = "qcom,apss-wdt-msm8226", "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + }; + + timer@f9020000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@f9021000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + acc0: power-manager@f9088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; + }; + + saw0: power-manager@f9089000 { + compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>; + }; + + acc1: power-manager@f9098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; + }; + + saw1: power-manager@f9099000 { + compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>; + }; + + acc2: power-manager@f90a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; + }; + + saw2: power-manager@f90a9000 { + compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>; + }; + + acc3: power-manager@f90b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; + }; + + saw3: power-manager@f90b9000 { + compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>; + }; + + sdhc_1: mmc@f9824900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc", "core"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_default_state>; + status = "disabled"; + }; + + sdhc_3: mmc@f9864900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc", "core"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_AHB_CLK>, + <&gcc GCC_SDCC3_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + pinctrl-names = "default"; + pinctrl-0 = <&sdhc3_default_state>; + status = "disabled"; + }; + + sdhc_2: mmc@f98a4900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc", "core"; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_default_state>; + status = "disabled"; + }; + + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + status = "disabled"; + }; + + blsp1_uart3: serial@f991f000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991f000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart4: serial@f9920000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9920000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@f9923000 { + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c1_pins>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c2: i2c@f9924000 { + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c2_pins>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c3: i2c@f9925000 { + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c3_pins>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c4: i2c@f9926000 { + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9926000 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c4_pins>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c5: i2c@f9927000 { + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9927000 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c5_pins>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c6: i2c@f9928000 { + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + pinctrl-0 = <&blsp1_i2c6_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x200>, + <0xf9a55200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <75000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8226", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + qcom,init-seq = /bits/ 8 <0x0 0x44 + 0x1 0x68 0x2 0x24 0x3 0x13>; + }; + }; + }; + + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + sram@fc190000 { + compatible = "qcom,msm8226-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8226"; + reg = <0xfc400000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>; + clock-names = "xo", + "sleep_clk"; + }; + + rpm_msg_ram: sram@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfc428000 0x4000>; + + apss_master_stats: sram@150 { + reg = <0x150 0x14>; + }; + + mpss_master_stats: sram@b50 { + reg = <0xb50 0x14>; + }; + + lpss_master_stats: sram@1550 { + reg = <0x1550 0x14>; + }; + + pronto_master_stats: sram@1f50 { + reg = <0x1f50 0x14>; + }; + }; + + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2"; + #qcom,sensors = <6>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + qfprom: qfprom@fc4bc000 { + compatible = "qcom,msm8226-qfprom", "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@1c1 { + reg = <0x1c1 0x2>; + bits = <5 8>; + }; + + tsens_s0_p1: s0-p1@1c2 { + reg = <0x1c2 0x2>; + bits = <5 6>; + }; + + tsens_s1_p1: s1-p1@1c4 { + reg = <0x1c4 0x1>; + bits = <0 6>; + }; + + tsens_s2_p1: s2-p1@1c4 { + reg = <0x1c4 0x2>; + bits = <6 6>; + }; + + tsens_s3_p1: s3-p1@1c5 { + reg = <0x1c5 0x2>; + bits = <4 6>; + }; + + tsens_s4_p1: s4-p1@1c6 { + reg = <0x1c6 0x1>; + bits = <2 6>; + }; + + tsens_s5_p1: s5-p1@1c7 { + reg = <0x1c7 0x1>; + bits = <0 6>; + }; + + tsens_s6_p1: s6-p1@1ca { + reg = <0x1ca 0x2>; + bits = <4 6>; + }; + + tsens_base2: base2@1cc { + reg = <0x1cc 0x1>; + bits = <0 8>; + }; + + tsens_s0_p2: s0-p2@1cd { + reg = <0x1cd 0x1>; + bits = <0 6>; + }; + + tsens_s1_p2: s1-p2@1cd { + reg = <0x1cd 0x2>; + bits = <6 6>; + }; + + tsens_s2_p2: s2-p2@1ce { + reg = <0x1ce 0x2>; + bits = <4 6>; + }; + + tsens_s3_p2: s3-p2@1cf { + reg = <0x1cf 0x1>; + bits = <2 6>; + }; + + tsens_s4_p2: s4-p2@446 { + reg = <0x446 0x2>; + bits = <4 6>; + }; + + tsens_s5_p2: s5-p2@447 { + reg = <0x447 0x1>; + bits = <2 6>; + }; + + tsens_s6_p2: s6-p2@44e { + reg = <0x44e 0x1>; + bits = <1 6>; + }; + + tsens_mode: mode@44f { + reg = <0x44f 0x1>; + bits = <5 3>; + }; + }; + + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8226-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + blsp1_i2c1_pins: blsp1-i2c1-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_pins: blsp1-i2c2-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_pins: blsp1-i2c3-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_pins: blsp1-i2c4-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c5_pins: blsp1-i2c5-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_pins: blsp1-i2c6-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + cci_default: cci-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c0"; + + drive-strength = <2>; + bias-disable; + }; + + cci_sleep: cci-sleep-state { + pins = "gpio29", "gpio30"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc1_default_state: sdhc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_default_state: sdhc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc3_default_state: sdhc3-default-state { + clk-pins { + pins = "gpio44"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio43"; + function = "sdc3"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio39", "gpio40", "gpio41", "gpio42"; + function = "sdc3"; + drive-strength = <8>; + bias-pull-up; + }; + }; + }; + + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8226"; + reg = <0xfd8c0000 0x6000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_MMSS_GPLL0_CLK_SRC>, + <&gcc GPLL0_VOTE>, + <&gcc GPLL1_VOTE>, + <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>; + clock-names = "xo", + "mmss_gpll0_vote", + "gpll0_vote", + "gpll1_vote", + "gfx3d_clk_src", + "dsi0pll", + "dsi0pllbyte"; + }; + + mdss: display-subsystem@fd900000 { + compatible = "qcom,mdss"; + reg = <0xfd900000 0x100>, <0xfd924000 0x1000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@fd900000 { + compatible = "qcom,msm8226-mdp5", "qcom,mdp5"; + reg = <0xfd900100 0x22000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_mdp_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@fd922800 { + compatible = "qcom,msm8226-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0xfd922800 0x1f8>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdss_mdp_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-8226"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x280>, + <0xfd922d80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + }; + }; + + cci: cci@fda0c000 { + compatible = "qcom,msm8226-cci"; + reg = <0xfda0c000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci_default>; + pinctrl-1 = <&cci_sleep>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-305.18", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-19000000 { + opp-hz = /bits/ 64 <19000000>; + }; + }; + }; + + sram@fdd00000 { + compatible = "qcom,msm8226-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x20000>; + reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x20000>; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>; + clock-names = "core"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x20000>; + }; + }; + + adsp: remoteproc@fe200000 { + compatible = "qcom,msm8226-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8226_VDDCX>; + power-domain-names = "cx"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + + label = "lpass"; + }; + }; + + sram@fe805000 { + compatible = "qcom,msm8226-imem", "syscon", "simple-mfd"; + reg = <0xfe805000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + + mode-bootloader = <0x77665500>; + mode-normal = <0x77665501>; + mode-recovery = <0x77665502>; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/dts/src/arm/qcom/qcom-msm8660-surf.dts b/dts/src/arm/qcom/qcom-msm8660-surf.dts new file mode 100644 index 0000000000..69fe651f56 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8660-surf.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/input/input.h> + +#include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" + +/ { + model = "Qualcomm MSM8660 SURF"; + compatible = "qcom,msm8660-surf", "qcom,msm8660"; + + aliases { + serial0 = &gsbi12_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; +}; + +&gsbi12 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi12_serial { + status = "okay"; +}; + +&pm8058 { + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8058_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_FN_F1) + MATRIX_KEY(0, 1, KEY_UP) + MATRIX_KEY(0, 2, KEY_LEFT) + MATRIX_KEY(0, 3, KEY_VOLUMEUP) + MATRIX_KEY(1, 0, KEY_FN_F2) + MATRIX_KEY(1, 1, KEY_RIGHT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) + MATRIX_KEY(2, 3, KEY_ENTER) + MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) + MATRIX_KEY(4, 1, KEY_UP) + MATRIX_KEY(4, 2, KEY_LEFT) + MATRIX_KEY(4, 3, KEY_HOME) + MATRIX_KEY(4, 4, KEY_FN_F3) + MATRIX_KEY(5, 0, KEY_CAMERA) + MATRIX_KEY(5, 1, KEY_RIGHT) + MATRIX_KEY(5, 2, KEY_DOWN) + MATRIX_KEY(5, 3, KEY_BACK) + MATRIX_KEY(5, 4, KEY_MENU) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; +}; + +&rpm { + regulators-0 { + compatible = "qcom,rpm-pm8901-regulators"; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8058-regulators"; + }; +}; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&vsdcc_fixed>; + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + vmmc-supply = <&vsdcc_fixed>; + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-msm8660.dtsi b/dts/src/arm/qcom/qcom-msm8660.dtsi new file mode 100644 index 0000000000..455ba4bf1b --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8660.dtsi @@ -0,0 +1,435 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8660.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm MSM8660"; + compatible = "qcom,msm8660"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,scorpion"; + enable-method = "qcom,gcc-msm8660"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + compatible = "qcom,scorpion"; + enable-method = "qcom,gcc-msm8660"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + cpu-pmu { + compatible = "qcom,scorpion-mp-pmu"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + clocks { + cxo_board: cxo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "cxo_board"; + }; + + pxo_board: pxo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "pxo_board"; + }; + + sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "sleep_clk"; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@2080000 { + compatible = "qcom,msm-8660-qgic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02080000 0x1000 >, + < 0x02081000 0x1000 >; + }; + + timer@2000000 { + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>; + cpu-offset = <0x40000>; + }; + + tlmm: pinctrl@800000 { + compatible = "qcom,msm8660-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + gpio-ranges = <&tlmm 0 0 173>; + #gpio-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8660"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; + }; + + gsbi1: gsbi@16000000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16000000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi1_spi: spi@16080000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16080000 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi3: gsbi@16200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + status = "disabled"; + + gsbi3_i2c: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16280000 0x1000>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi6: gsbi@16500000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16500000 0x100>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + gsbi6_serial: serial@16540000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16540000 0x1000>, + <0x16500000 0x1000>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi7: gsbi@16600000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + gsbi7_serial: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi7_i2c: i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16680000 0x1000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi8: gsbi@19800000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x19800000 0x100>; + clocks = <&gcc GSBI8_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + status = "disabled"; + + gsbi8_i2c: i2c@19880000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x19880000 0x1000>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi12: gsbi@19c00000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x19c00000 0x100>; + clocks = <&gcc GSBI12_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi12_serial: serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi12_i2c: i2c@19c80000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x19c80000 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + ebi2: external-bus@1a100000 { + compatible = "qcom,msm8660-ebi2"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x0 0x1a800000 0x00800000>, + <1 0x0 0x1b000000 0x00800000>, + <2 0x0 0x1b800000 0x00800000>, + <3 0x0 0x1d000000 0x08000000>, + <4 0x0 0x1c800000 0x00800000>, + <5 0x0 0x1c000000 0x00800000>; + reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>; + reg-names = "ebi2", "xmem"; + clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>; + clock-names = "ebi2x", "ebi2"; + status = "disabled"; + }; + + ssbi: ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + l2cc: clock-controller@2082000 { + compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon"; + reg = <0x02082000 0x1000>; + }; + + rpm: rpm@104000 { + compatible = "qcom,rpm-msm8660"; + reg = <0x00104000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&pxo_board>; + clock-names = "pxo"; + }; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: mmc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + }; + + sdcc2: mmc@12140000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12140000 0x8000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + }; + + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + }; + + sdcc4: mmc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x8000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + }; + + sdcc5: mmc@12200000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12200000 0x8000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + }; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8660", "syscon"; + reg = <0x1a400000 0x100>; + }; + }; + +}; diff --git a/dts/src/arm/qcom/qcom-msm8916-samsung-e5.dts b/dts/src/arm/qcom/qcom-msm8916-samsung-e5.dts new file mode 100644 index 0000000000..c8d34de8a7 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8916-samsung-e5.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-e5.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/dts/src/arm/qcom/qcom-msm8916-samsung-e7.dts b/dts/src/arm/qcom/qcom-msm8916-samsung-e7.dts new file mode 100644 index 0000000000..85be286c86 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8916-samsung-e7.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-e7.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/dts/src/arm/qcom/qcom-msm8916-samsung-grandmax.dts b/dts/src/arm/qcom/qcom-msm8916-samsung-grandmax.dts new file mode 100644 index 0000000000..d3abe05362 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8916-samsung-grandmax.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-grandmax.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/dts/src/arm/qcom/qcom-msm8916-samsung-serranove.dts b/dts/src/arm/qcom/qcom-msm8916-samsung-serranove.dts new file mode 100644 index 0000000000..dee2c20af3 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8916-samsung-serranove.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-serranove.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/dts/src/arm/qcom/qcom-msm8916-smp.dtsi b/dts/src/arm/qcom/qcom-msm8916-smp.dtsi new file mode 100644 index 0000000000..36328dbe42 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8916-smp.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/ { + cpus { + cpu@0 { + enable-method = "qcom,msm8916-smp"; + }; + cpu@1 { + enable-method = "qcom,msm8916-smp"; + }; + cpu@2 { + enable-method = "qcom,msm8916-smp"; + }; + cpu@3 { + enable-method = "qcom,msm8916-smp"; + }; + + idle-states { + /delete-property/ entry-method; + }; + }; + + psci { + status = "disabled"; + }; +}; + +&CPU_SLEEP_0 { + compatible = "qcom,idle-state-spc"; +}; + +&cpu0_acc { + status = "okay"; +}; + +&cpu0_saw { + status = "okay"; +}; + +&cpu1_acc { + status = "okay"; +}; + +&cpu1_saw { + status = "okay"; +}; + +&cpu2_acc { + status = "okay"; +}; + +&cpu2_saw { + status = "okay"; +}; + +&cpu3_acc { + status = "okay"; +}; + +&cpu3_saw { + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-msm8926-htc-memul.dts b/dts/src/arm/qcom/qcom-msm8926-htc-memul.dts new file mode 100644 index 0000000000..3037344eb2 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8926-htc-memul.dts @@ -0,0 +1,385 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + model = "HTC One Mini 2"; + compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + unknown@5b00000 { + reg = <0x05b00000 0x200000>; + no-map; + }; + + unknown@7500000 { + reg = <0x07500000 0xb00000>; + no-map; + }; + + mpss_region: mpss@8000000 { + reg = <0x08000000 0x4f00000>; + no-map; + }; + + unknown@cf00000 { + reg = <0x0cf00000 0x200000>; + no-map; + }; + + mba_region: mba@d100000 { + reg = <0x0d100000 0x3a000>; + no-map; + }; + + unknown@d13a000 { + reg = <0x0d13a000 0xc6000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0x650000>; + no-map; + }; + + unknown@d850000 { + reg = <0x0d850000 0x3b0000>; + no-map; + }; + + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1400000>; + no-map; + }; + + unknown@f000000 { + reg = <0x0f000000 0x500000>; + no-map; + }; + + venus_region: venus@f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + unknown@fb00000 { + reg = <0x0fb00000 0x280000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + unknown@ff00000 { + reg = <0x0ff00000 0x1700000>; + no-map; + }; + }; +}; + +&adsp { + firmware-name = "qcom/msm8926/memul/adsp.mbn"; + status = "okay"; +}; + +&blsp1_i2c2 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8226_l19>; + vid-supply = <&pm8226_l28>; + }; + + accelerometer@18 { + compatible = "bosch,bma250e"; + reg = <0x18>; + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_l28>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + /* TFA9887 @ 34 */ + /* TFA9887 @ 35 */ +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + + syna,startup-delay-ms = <160>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + /* NCP6924 Camera Regulators @ 10 */ + /* PN544 NFC @ 28 */ + /* TPS61310 Flash/Torch @ 33 */ +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <1750000>; + qcom,fast-charge-current-limit = <1750000>; + qcom,fast-charge-safe-voltage = <4360000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8926-microsoft-superman-lte.dts b/dts/src/arm/qcom/qcom-msm8926-microsoft-superman-lte.dts new file mode 100644 index 0000000000..9b48661d69 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8926-microsoft-superman-lte.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/* This device has touchscreen on i2c3 instead */ +/delete-node/ &touchscreen; + +/ { + model = "Nokia Lumia 735"; + compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&blsp1_i2c3 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5 { + status = "disabled"; +}; diff --git a/dts/src/arm/qcom/qcom-msm8926-microsoft-tesla.dts b/dts/src/arm/qcom/qcom-msm8926-microsoft-tesla.dts new file mode 100644 index 0000000000..53a6d4e859 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8926-microsoft-tesla.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/* This device has touchscreen on i2c1 instead */ +/delete-node/ &touchscreen; + +/ { + model = "Nokia Lumia 830"; + compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&blsp1_i2c1 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5 { + status = "disabled"; +}; + +&gpio_keys { + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + }; + + key-camera-focus { + label = "Camera Focus"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + }; +}; diff --git a/dts/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts b/dts/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts new file mode 100644 index 0000000000..0cbe2d2fbb --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Motorola Moto G 4G (2013)"; + compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + sensor@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + pm8226_lvs1: lvs1 { + /* Pull-up for I2C lines */ + regulator-always-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <2000000>; + qcom,fast-charge-current-limit = <1900000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8926-samsung-matisselte.dts b/dts/src/arm/qcom/qcom-msm8926-samsung-matisselte.dts new file mode 100644 index 0000000000..d0e1bc39f8 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8926-samsung-matisselte.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> + * Copyright (c) 2023, Stefan Hansson <newbyte@postmarketos.org> + */ + +/dts-v1/; + +#include "qcom-msm8226-samsung-matisse-common.dtsi" + +/ { + model = "Samsung Galaxy Tab 4 10.1 LTE"; + compatible = "samsung,matisselte", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "tablet"; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en1_default_state>; + }; +}; + +&tlmm { + tsp_en1_default_state: tsp-en1-default-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/dts/src/arm/qcom/qcom-msm8960-cdp.dts b/dts/src/arm/qcom/qcom-msm8960-cdp.dts new file mode 100644 index 0000000000..36f4c997b0 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8960-cdp.dts @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/input/input.h> + +#include "qcom-msm8960.dtsi" +#include "pm8921.dtsi" + +/ { + model = "Qualcomm MSM8960 CDP"; + compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + + aliases { + serial0 = &gsbi5_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_l2: gpio-regulator { + compatible = "regulator-fixed"; + regulator-name = "ext_l2"; + gpio = <&msmgpio 91 0>; + startup-delay-us = <10000>; + enable-active-high; + }; +}; + +&gsbi1 { + qcom,mode = <GSBI_PROT_SPI>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_default>; + status = "okay"; +}; + +&gsbi1_spi { + status = "okay"; + + ethernet@0 { + compatible = "micrel,ks8851"; + reg = <0>; + interrupt-parent = <&msmgpio>; + interrupts = <90 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <5400000>; + vdd-supply = <&ext_l2>; + vdd-io-supply = <&pm8921_lvs6>; + reset-gpios = <&msmgpio 89 0>; + }; +}; + +&gsbi5 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi5_serial { + status = "okay"; +}; + +&msmgpio { + spi1_default: spi1-default-state { + mosi-pins { + pins = "gpio6"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + miso-pins { + pins = "gpio7"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio8"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk-pins { + pins = "gpio9"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + }; +}; + +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; + + status = "okay"; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + vdd_ncp-supply = <&pm8921_l6>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l21_l23_l29-supply = <&pm8921_s8>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + pm8921_s4: s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s8: s8 { + regulator-always-on; + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8921_l1: l1 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l7: l7 { + regulator-always-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l8: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l10: l10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l11: l11 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8921_l12: l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l16: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + pm8921_l17: l17 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l18: l18 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + bias-pull-down; + }; + + pm8921_l21: l21 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_l22: l22 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l24: l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8921_l25: l25 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs2: lvs2 { + bias-pull-down; + }; + + pm8921_lvs3: lvs3 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + + pm8921_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; +}; + +/* eMMC */ +&sdcc1 { + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-msm8960-pins.dtsi b/dts/src/arm/qcom/qcom-msm8960-pins.dtsi new file mode 100644 index 0000000000..4fa9827712 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8960-pins.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-only + +&msmgpio { + i2c3_default_state: i2c3-default-state { + i2c3-pins { + pins = "gpio16", "gpio17"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + }; + + i2c3_sleep_state: i2c3-sleep-state { + i2c3-pins { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + }; +}; diff --git a/dts/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts b/dts/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts new file mode 100644 index 0000000000..af6cc6393d --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/input/input.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> + +#include "qcom-msm8960.dtsi" +#include "pm8921.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + model = "Samsung Galaxy Express SGH-I437"; + compatible = "samsung,expressatt", "qcom,msm8960"; + chassis-type = "handset"; + + aliases { + serial0 = &gsbi5_serial; + mmc0 = &sdcc1; /* SDCC1 eMMC slot */ + mmc1 = &sdcc3; /* SDCC3 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-home { + label = "Home"; + gpios = <&msmgpio 40 GPIO_ACTIVE_LOW>; + debounce-interval = <5>; + linux,code = <KEY_HOMEPAGE>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 50 GPIO_ACTIVE_LOW>; + debounce-interval = <5>; + linux,code = <KEY_VOLUMEUP>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&msmgpio 81 GPIO_ACTIVE_LOW>; + debounce-interval = <5>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; +}; + +&gsbi5 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi5_serial { + status = "okay"; +}; + +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + status = "okay"; +}; + +&sdcc3 { + vmmc-supply = <&pm8921_l6>; + vqmmc-supply = <&pm8921_l7>; + status = "okay"; +}; + +&gsbi1 { + qcom,mode = <GSBI_PROT_SPI>; + pinctrl-0 = <&spi1_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gsbi1_spi { + status = "okay"; +}; + +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi3_i2c { + status = "okay"; + + // Atmel mXT224S touchscreen + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&msmgpio>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + vdda-supply = <&pm8921_lvs6>; + vdd-supply = <&pm8921_l17>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen>; + }; +}; + +&msmgpio { + spi1_default: spi1-default-state { + mosi-pins { + pins = "gpio6"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + miso-pins { + pins = "gpio7"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio8"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk-pins { + pins = "gpio9"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + }; + + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio40", "gpio50", "gpio81"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + touchscreen: touchscreen-int-state { + pins = "gpio11"; + function = "gpio"; + output-enable; + bias-disable; + drive-strength = <2>; + }; +}; + +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + vdd_ncp-supply = <&pm8921_l6>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l21_l23_l29-supply = <&pm8921_s8>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + pm8921_s4: s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s8: s8 { + regulator-always-on; + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8921_l1: l1 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l7: l7 { + regulator-always-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l8: l8 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + bias-pull-down; + }; + + pm8921_l9: l9 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8921_l10: l10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l11: l11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l12: l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l16: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l17: l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l18: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + bias-pull-down; + }; + + pm8921_l21: l21 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_l22: l22 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l24: l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8921_l25: l25 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs2: lvs2 { + bias-pull-down; + }; + + pm8921_lvs3: lvs3 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + + pm8921_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; +}; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-msm8960.dtsi b/dts/src/arm/qcom/qcom-msm8960.dtsi new file mode 100644 index 0000000000..922f9e4946 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8960.dtsi @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,lcc-msm8960.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm MSM8960"; + compatible = "qcom,msm8960"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_PPI 14 0x304>; + + cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 10 0x304>; + qcom,no-pc-write; + }; + + clocks { + cxo_board: cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "cxo_board"; + }; + + pxo_board: pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "pxo_board"; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "sleep_clk"; + }; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer", + "qcom,msm-timer"; + interrupts = <GIC_PPI 1 0x301>, + <GIC_PPI 2 0x301>, + <GIC_PPI 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>; + cpu-offset = <0x80000>; + }; + + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 152>; + #gpio-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + clocks = <&cxo_board>, + <&pxo_board>, + <&lcc PLL4>; + clock-names = "cxo", "pxo", "pll4"; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-msm8960"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, <0>, + <0>, <0>, + <0>; + clock-names = "pxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; + }; + + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL3>, + <&gcc PLL8_VOTE>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll3", + "pll8_vote", + "dsi1pll", + "dsi1pllbyte", + "dsi2pll", + "dsi2pllbyte", + "hdmipll"; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; + }; + + rpm: rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; + }; + + saw0: power-manager@2089000 { + compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + + saw0_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + }; + + saw1: power-manager@2099000 { + compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + + saw1_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + }; + + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x16400000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi5_serial: serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + ssbi: ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc1: mmc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8960", "syscon"; + reg = <0x1a400000 0x100>; + }; + + gsbi1: gsbi@16000000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <1>; + reg = <0x16000000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi1_spi: spi@16080000 { + compatible = "qcom,spi-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16080000 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + cs-gpios = <&msmgpio 8 0>; + + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + usb1: usb@12500000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x200>, + <0x12500200 0x200>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS1_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS1_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs1_phy>; + phy-names = "usb-phy"; + #reset-cells = <1>; + status = "disabled"; + + ulpi { + usb_hs1_phy: phy { + compatible = "qcom,usb-hs-phy-msm8960", + "qcom,usb-hs-phy"; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb1 0>; + reset-names = "por"; + #phy-cells = <0>; + }; + }; + }; + + gsbi3: gsbi@16200000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16200000 0x100>; + ranges; + cell-index = <3>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + gsbi3_i2c: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16280000 0x1000>; + pinctrl-0 = <&i2c3_default_state>; + pinctrl-1 = <&i2c3_sleep_state>; + pinctrl-names = "default", "sleep"; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI3_QUP_CLK>, + <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + }; +}; +#include "qcom-msm8960-pins.dtsi" diff --git a/dts/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts new file mode 100644 index 0000000000..4aaae8537a --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -0,0 +1,725 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "LGE MSM 8974 HAMMERHEAD"; + compatible = "lge,hammerhead", "qcom,msm8974"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart1; + serial1 = &blsp2_uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + + key-volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + clk_pwm: pwm { + compatible = "clk-pwm"; + clocks = <&mmcc CAMSS_GP1_CLK>; + + pinctrl-0 = <&vibrator_pin>; + pinctrl-names = "default"; + + #pwm-cells = <2>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&clk_pwm 0 100000>; + pwm-names = "enable"; + + vcc-supply = <&pm8941_l19>; + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; +}; + +&blsp1_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; + }; + + fuelgauge: max17048@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x4d>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + + maxim,alert-low-soc-level = <2>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + + interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + clock-frequency = <100000>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + led-controller@38 { + compatible = "ti,lm3630a"; + status = "okay"; + reg = <0x38>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; + }; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + clock-frequency = <100000>; + + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; + }; + + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; +}; + +&blsp2_uart4 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_pin>; + + host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + status = "okay"; + + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_lvs3>; + vddio-supply = <&pm8941_l12>; + + panel: panel@0 { + reg = <0>; + compatible = "lg,acx467akm-7"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + + vddio-supply = <&pm8941_l12>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio3"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + fuelgauge_pin: fuelgauge-int-state { + pins = "gpio9"; + function = "normal"; + + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_sleep_clk_pin: wl-sleep-clk-state { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_regulator_pin: wl-reg-active-state { + pins = "gpio17"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; + }; +}; + +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + status = "okay"; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&tlmm { + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + mpu6515_pin: mpu6515-state { + pins = "gpio73"; + function = "gpio"; + bias-disable; + }; + + touch_pin: touch-state { + int-pins { + pins = "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + reset-pins { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + panel_pin: panel-state { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + + bt_pin: bt-state { + hostwake-pins { + pins = "gpio42"; + function = "gpio"; + }; + + devwake-pins { + pins = "gpio62"; + function = "gpio"; + }; + + shutdown-pins { + pins = "gpio41"; + function = "gpio"; + }; + }; + + vibrator_pin: vibrator-state { + core-pins { + pins = "gpio27"; + function = "gp1_clk"; + drive-strength = <6>; + bias-disable; + }; + + enable-pins { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts b/dts/src/arm/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts new file mode 100644 index 0000000000..9f2ab5c122 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1 Compact"; + compatible = "sony,xperia-amami", "qcom,msm8974"; + chassis-type = "handset"; +}; + +&smbb { + qcom,fast-charge-safe-current = <1300000>; + qcom,fast-charge-current-limit = <1300000>; + qcom,dc-current-limit = <1300000>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts b/dts/src/arm/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts new file mode 100644 index 0000000000..9028f17e5c --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; + chassis-type = "handset"; +}; diff --git a/dts/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/dts/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi new file mode 100644 index 0000000000..d34659ebac --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi @@ -0,0 +1,526 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@3e8e0000 { + compatible = "ramoops"; + reg = <0x3e8e0000 0x200000>; + + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + }; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + clock-frequency = <355000>; + + nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <59 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* sii8334 MHL HDMI bridge */ +}; + +&pm8941_coincell { + status = "okay"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + +&pm8941_wled { + status = "okay"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + status = "okay"; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&tlmm { + ts_int_pin: touch-int-state { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd-pins { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8974.dtsi b/dts/src/arm/qcom/qcom-msm8974.dtsi new file mode 100644 index 0000000000..5efc38d712 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974.dtsi @@ -0,0 +1,2411 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/interconnect/qcom,msm8974.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/reset/qcom,gcc-msm8974.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + + CPU0: cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; + }; + + CPU1: cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; + }; + + CPU2: cpu@2 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; + }; + + CPU3: cpu@3 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + qcom,saw = <&saw_l2>; + }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8974", "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + rpm: remoteproc { + compatible = "qcom,msm8974-rpm-proc", "qcom,rpm-proc"; + + master-stats { + compatible = "qcom,rpm-master-stats"; + qcom,rpm-msg-ram = <&apss_master_stats>, + <&mpss_master_stats>, + <&lpss_master_stats>, + <&pronto_master_stats>; + qcom,master-names = "APSS", + "MPSS", + "LPSS", + "PRONTO"; + }; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + }; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_region: mpss@8000000 { + reg = <0x08000000 0x5100000>; + no-map; + }; + + mba_region: mba@d100000 { + reg = <0x0d100000 0x100000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0xa00000>; + no-map; + }; + + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; + }; + + venus_region: memory@f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; + + tz_region: memory@fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; + }; + + rfsa_mem: memory@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-2 = <&apcs 8 9>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + adsp_smsm: adsp@2 { + reg = <2>; + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + + saw_l2: power-manager@f9012000 { + compatible = "qcom,msm8974-saw2-v2.1-l2", "qcom,saw2"; + reg = <0xf9012000 0x1000>; + }; + + watchdog@f9017000 { + compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + clock-frequency = <19200000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + acc0: power-manager@f9088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; + }; + + saw0: power-manager@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + + acc1: power-manager@f9098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; + }; + + saw1: power-manager@f9099000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + + acc2: power-manager@f90a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; + }; + + saw2: power-manager@f90a9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + + acc3: power-manager@f90b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; + }; + + saw3: power-manager@f90b9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + + sdhc_1: mmc@f9824900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc", "core"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + bus-width = <8>; + non-removable; + + status = "disabled"; + }; + + sdhc_3: mmc@f9864900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc", "core"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_AHB_CLK>, + <&gcc GCC_SDCC3_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + bus-width = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + sdhc_2: mmc@f98a4900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc", "core"; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + bus-width = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; + status = "disabled"; + }; + + blsp1_i2c1: i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart1: serial@f995d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995d000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_default>; + pinctrl-1 = <&blsp2_uart1_sleep>; + status = "disabled"; + }; + + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_uart4: serial@f9960000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9960000 0x1000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart4_default>; + status = "disabled"; + }; + + blsp2_i2c2: i2c@f9964000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9964000 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c5: i2c@f9967000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c6: i2c@f9968000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb: usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x200>, + <0xf9a55200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <75000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs1_phy: phy-0 { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + usb_hs2_phy: phy-1 { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>; + reset-names = "phy", "por"; + status = "disabled"; + }; + }; + }; + + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + pronto: remoteproc@fb204000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_region>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3680"; + + clocks = <&rpmcc RPM_SMD_CXO_A2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + status = "disabled"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + sram@fc190000 { + compatible = "qcom,msm8974-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + + etf@fc307000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc307000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merger_out>; + }; + }; + }; + }; + + tpiu@fc318000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xfc318000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; + }; + }; + }; + + funnel@fc31a000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc31a000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - not-connected + * 1 - connected trought funnel to Multimedia CPU + * 2 - connected to Wireless CPU + * 3 - not-connected + * 4 - not-connected + * 6 - not-connected + * 7 - connected to STM + */ + port@5 { + reg = <5>; + funnel1_in5: endpoint { + remote-endpoint = <&kpss_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merger_in1>; + }; + }; + }; + }; + + funnel@fc31b000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc31b000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - connected trought funnel to Audio, Modem and + * Resource and Power Manager CPU's + * 2...7 - not-connected + */ + port@1 { + reg = <1>; + merger_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + + out-ports { + port { + merger_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + }; + + replicator@fc31c000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0xfc31c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; + }; + }; + }; + + etm@fc33c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&kpss_in0>; + }; + }; + }; + }; + + etm@fc33d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33d000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&kpss_in1>; + }; + }; + }; + }; + + etm@fc33e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33e000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&kpss_in2>; + }; + }; + }; + }; + + etm@fc33f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33f000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&kpss_in3>; + }; + }; + }; + }; + + /* KPSS funnel, only 4 inputs are used */ + funnel@fc345000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; + }; + }; + + bimc: interconnect@fc380000 { + reg = <0xfc380000 0x6a000>; + compatible = "qcom,msm8974-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>; + clock-names = "xo", + "sleep_clk"; + }; + + rpm_msg_ram: sram@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfc428000 0x4000>; + + apss_master_stats: sram@150 { + reg = <0x150 0x14>; + }; + + mpss_master_stats: sram@b50 { + reg = <0xb50 0x14>; + }; + + lpss_master_stats: sram@1550 { + reg = <0x1550 0x14>; + }; + + pronto_master_stats: sram@1f50 { + reg = <0x1f50 0x14>; + }; + }; + + snoc: interconnect@fc460000 { + reg = <0xfc460000 0x4000>; + compatible = "qcom,msm8974-snoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + pnoc: interconnect@fc468000 { + reg = <0xfc468000 0x4000>; + compatible = "qcom,msm8974-pnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + ocmemnoc: interconnect@fc470000 { + reg = <0xfc470000 0x4000>; + compatible = "qcom,msm8974-ocmemnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; + }; + + mmssnoc: interconnect@fc478000 { + reg = <0xfc478000 0x4000>; + compatible = "qcom,msm8974-mmssnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&mmcc MMSS_S0_AXI_CLK>, + <&mmcc MMSS_S0_AXI_CLK>; + }; + + cnoc: interconnect@fc480000 { + reg = <0xfc480000 0x4000>; + compatible = "qcom,msm8974-cnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_use_backup>, + <&tsens_mode_backup>, + <&tsens_base1_backup>, <&tsens_base2_backup>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>, + <&tsens_s10_p1>, <&tsens_s10_p2>, + <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>, + <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>, + <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>, + <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>, + <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>, + <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>, + <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>, + <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>, + <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>, + <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>, + <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>; + nvmem-cell-names = "mode", + "base1", "base2", + "use_backup", + "mode_backup", + "base1_backup", "base2_backup", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2", + "s10_p1", "s10_p2", + "s0_p1_backup", "s0_p2_backup", + "s1_p1_backup", "s1_p2_backup", + "s2_p1_backup", "s2_p2_backup", + "s3_p1_backup", "s3_p2_backup", + "s4_p1_backup", "s4_p2_backup", + "s5_p1_backup", "s5_p2_backup", + "s6_p1_backup", "s6_p2_backup", + "s7_p1_backup", "s7_p2_backup", + "s8_p1_backup", "s8_p2_backup", + "s9_p1_backup", "s9_p2_backup", + "s10_p1_backup", "s10_p2_backup"; + #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + qfprom: qfprom@fc4bc000 { + compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; + reg = <0xfc4bc000 0x2100>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@d0 { + reg = <0xd0 0x1>; + bits = <0 8>; + }; + + tsens_s0_p1: s0-p1@d1 { + reg = <0xd1 0x1>; + bits = <0 6>; + }; + + tsens_s1_p1: s1-p1@d2 { + reg = <0xd1 0x2>; + bits = <6 6>; + }; + + tsens_s2_p1: s2-p1@d2 { + reg = <0xd2 0x2>; + bits = <4 6>; + }; + + tsens_s3_p1: s3-p1@d3 { + reg = <0xd3 0x1>; + bits = <2 6>; + }; + + tsens_s4_p1: s4-p1@d4 { + reg = <0xd4 0x1>; + bits = <0 6>; + }; + + tsens_s5_p1: s5-p1@d4 { + reg = <0xd4 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@d5 { + reg = <0xd5 0x2>; + bits = <4 6>; + }; + + tsens_s7_p1: s7-p1@d6 { + reg = <0xd6 0x1>; + bits = <2 6>; + }; + + tsens_s8_p1: s8-p1@d7 { + reg = <0xd7 0x1>; + bits = <0 6>; + }; + + tsens_mode: mode@d7 { + reg = <0xd7 0x1>; + bits = <6 2>; + }; + + tsens_s9_p1: s9-p1@d8 { + reg = <0xd8 0x1>; + bits = <0 6>; + }; + + tsens_s10_p1: s10_p1@d8 { + reg = <0xd8 0x2>; + bits = <6 6>; + }; + + tsens_base2: base2@d9 { + reg = <0xd9 0x2>; + bits = <4 8>; + }; + + tsens_s0_p2: s0-p2@da { + reg = <0xda 0x2>; + bits = <4 6>; + }; + + tsens_s1_p2: s1-p2@db { + reg = <0xdb 0x1>; + bits = <2 6>; + }; + + tsens_s2_p2: s2-p2@dc { + reg = <0xdc 0x1>; + bits = <0 6>; + }; + + tsens_s3_p2: s3-p2@dc { + reg = <0xdc 0x2>; + bits = <6 6>; + }; + + tsens_s4_p2: s4-p2@dd { + reg = <0xdd 0x2>; + bits = <4 6>; + }; + + tsens_s5_p2: s5-p2@de { + reg = <0xde 0x2>; + bits = <2 6>; + }; + + tsens_s6_p2: s6-p2@df { + reg = <0xdf 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@e0 { + reg = <0xe0 0x1>; + bits = <0 6>; + }; + + tsens_s8_p2: s8-p2@e0 { + reg = <0xe0 0x2>; + bits = <6 6>; + }; + + tsens_s9_p2: s9-p2@e1 { + reg = <0xe1 0x2>; + bits = <4 6>; + }; + + tsens_s10_p2: s10_p2@e2 { + reg = <0xe2 0x2>; + bits = <2 6>; + }; + + tsens_s5_p2_backup: s5-p2_backup@e3 { + reg = <0xe3 0x2>; + bits = <0 6>; + }; + + tsens_mode_backup: mode_backup@e3 { + reg = <0xe3 0x1>; + bits = <6 2>; + }; + + tsens_s6_p2_backup: s6-p2_backup@e4 { + reg = <0xe4 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2_backup: s7-p2_backup@e4 { + reg = <0xe4 0x2>; + bits = <6 6>; + }; + + tsens_s8_p2_backup: s8-p2_backup@e5 { + reg = <0xe5 0x2>; + bits = <4 6>; + }; + + tsens_s9_p2_backup: s9-p2_backup@e6 { + reg = <0xe6 0x2>; + bits = <2 6>; + }; + + tsens_s10_p2_backup: s10_p2_backup@e7 { + reg = <0xe7 0x1>; + bits = <0 6>; + }; + + tsens_base1_backup: base1_backup@440 { + reg = <0x440 0x1>; + bits = <0 8>; + }; + + tsens_s0_p1_backup: s0-p1_backup@441 { + reg = <0x441 0x1>; + bits = <0 6>; + }; + + tsens_s1_p1_backup: s1-p1_backup@442 { + reg = <0x441 0x2>; + bits = <6 6>; + }; + + tsens_s2_p1_backup: s2-p1_backup@442 { + reg = <0x442 0x2>; + bits = <4 6>; + }; + + tsens_s3_p1_backup: s3-p1_backup@443 { + reg = <0x443 0x1>; + bits = <2 6>; + }; + + tsens_s4_p1_backup: s4-p1_backup@444 { + reg = <0x444 0x1>; + bits = <0 6>; + }; + + tsens_s5_p1_backup: s5-p1_backup@444 { + reg = <0x444 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1_backup: s6-p1_backup@445 { + reg = <0x445 0x2>; + bits = <4 6>; + }; + + tsens_s7_p1_backup: s7-p1_backup@446 { + reg = <0x446 0x1>; + bits = <2 6>; + }; + + tsens_use_backup: use_backup@447 { + reg = <0x447 0x1>; + bits = <5 3>; + }; + + tsens_s8_p1_backup: s8-p1_backup@448 { + reg = <0x448 0x1>; + bits = <0 6>; + }; + + tsens_s9_p1_backup: s9-p1_backup@448 { + reg = <0x448 0x2>; + bits = <6 6>; + }; + + tsens_s10_p1_backup: s10_p1_backup@449 { + reg = <0x449 0x2>; + bits = <4 6>; + }; + + tsens_base2_backup: base2_backup@44a { + reg = <0x44a 0x2>; + bits = <2 8>; + }; + + tsens_s0_p2_backup: s0-p2_backup@44b { + reg = <0x44b 0x3>; + bits = <2 6>; + }; + + tsens_s1_p2_backup: s1-p2_backup@44c { + reg = <0x44c 0x1>; + bits = <0 6>; + }; + + tsens_s2_p2_backup: s2-p2_backup@44c { + reg = <0x44c 0x2>; + bits = <6 6>; + }; + + tsens_s3_p2_backup: s3-p2_backup@44d { + reg = <0x44d 0x2>; + bits = <4 6>; + }; + + tsens_s4_p2_backup: s4-p2_backup@44e { + reg = <0x44e 0x1>; + bits = <2 6>; + }; + }; + + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + bam_dmux_dma: dma-controller@fc834000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xfc834000 0x7000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + }; + + remoteproc_mss: remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&modem_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon"; + reg = <0xfd484000 0x2000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@fd4a0000 { + compatible = "qcom,tcsr-msm8974", "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + sdc1_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + rx-pins { + pins = "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-up; + }; + + tx-pins { + pins = "gpio4"; + function = "blsp_uart2"; + drive-strength = <4>; + bias-disable; + }; + }; + + blsp2_uart1_default: blsp2-uart1-default-state { + tx-rts-pins { + pins = "gpio41", "gpio44"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts-pins { + pins = "gpio42", "gpio43"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp2_uart1_sleep: blsp2-uart1-sleep-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart4_default: blsp2-uart4-default-state { + tx-rts-pins { + pins = "gpio53", "gpio56"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts-pins { + pins = "gpio54", "gpio55"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP1_I2C4 info is missing */ + + /* BLSP1_I2C5 info is missing */ + + blsp1_i2c6_default: blsp1-i2c6-default-state { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + + /* BLSP2_I2C1 info is missing */ + + blsp2_i2c2_default: blsp2-i2c2-default-state { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C3 info is missing */ + + /* BLSP2_I2C4 info is missing */ + + blsp2_i2c5_default: blsp2-i2c5-default-state { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep-state { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c6_default: blsp2-i2c6-default-state { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-pull-up; + }; + + cci_default: cci-default-state { + cci_i2c0_default: cci-i2c0-default-pins { + pins = "gpio19", "gpio20"; + function = "cci_i2c0"; + drive-strength = <2>; + bias-disable; + }; + + cci_i2c1_default: cci-i2c1-default-pins { + pins = "gpio21", "gpio22"; + function = "cci_i2c1"; + drive-strength = <2>; + bias-disable; + }; + }; + + cci_sleep: cci-sleep-state { + cci_i2c0_sleep: cci-i2c0-sleep-pins { + pins = "gpio19", "gpio20"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cci_i2c1_sleep: cci-i2c1-sleep-pins { + pins = "gpio21", "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + spi8_default: spi8_default-state { + mosi-pins { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso-pins { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs-pins { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk-pins { + pins = "gpio48"; + function = "blsp_spi8"; + }; + }; + }; + + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfd8c0000 0x6000>; + clocks = <&xo_board>, + <&gcc GCC_MMSS_GPLL0_CLK_SRC>, + <&gcc GPLL0_VOTE>, + <&gcc GPLL1_VOTE>, + <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "mmss_gpll0_vote", + "gpll0_vote", + "gpll1_vote", + "gfx3d_clk_src", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll", + "edp_link_clk", + "edp_vco_div"; + }; + + mdss: display-subsystem@fd900000 { + compatible = "qcom,mdss"; + reg = <0xfd900000 0x100>, <0xfd924000 0x1000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "vsync"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: display-controller@fd900000 { + compatible = "qcom,msm8974-mdp5", "qcom,mdp5"; + reg = <0xfd900100 0x22000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>; + interconnect-names = "mdp0-mem"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@fd922800 { + compatible = "qcom,msm8974-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0xfd922800 0x1f8>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&mdss_dsi0_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-hpm"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x280>, + <0xfd922d80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@fd922e00 { + compatible = "qcom,msm8974-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0xfd922e00 0x1f8>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&mdss_dsi1_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@fd923000 { + compatible = "qcom,dsi-phy-28nm-hpm"; + reg = <0xfd923000 0xd4>, + <0xfd923100 0x280>, + <0xfd923380 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + cci: cci@fda0c000 { + compatible = "qcom,msm8974-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfda0c000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci_default>; + pinctrl-1 = <&cci_sleep>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.1", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", "ocmem"; + + // iommus = <&gpu_iommu 0>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + + sram@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x180000>; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + + remoteproc_adsp: remoteproc@fe200000 { + compatible = "qcom,msm8974-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + label = "lpass"; + }; + }; + + imem: sram@fe805000 { + compatible = "qcom,msm8974-imem", "syscon", "simple-mfd"; + reg = <0xfe805000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; diff --git a/dts/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts b/dts/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts new file mode 100644 index 0000000000..fe227fd3f9 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Fairphone 2"; + compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@41 { + compatible = "ilitek,ili2120"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&imem { + reboot-mode { + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio1", "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pronto { + status = "okay"; + + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&remoteproc_adsp { + status = "okay"; + cx-supply = <&pm8841_s2>; +}; + +&remoteproc_mss { + status = "okay"; + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,fast-charge-safe-voltage = <4380000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4240000>; + qcom,minimum-input-voltage = <4450000>; + + status = "okay"; +}; + +&tlmm { + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active-state { + wlan-pins { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + bt-pins { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + + drive-strength = <2>; + bias-pull-down; + }; + + fm-pins { + pins = "gpio41", "gpio42"; + function = "fm"; + + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts b/dts/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts new file mode 100644 index 0000000000..4c8edadea0 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts @@ -0,0 +1,543 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "OnePlus One"; + compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + qcom,msm-id = <194 0x10000>; + qcom,board-id = <8 0>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + debounce-interval = <150>; + }; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&blsp1_i2c1 { + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + power-supplies = <&bq24196_charger>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + rmi4-i2c-dev@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + syna,startup-delay-ms = <100>; + + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_default_state>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + /* + * Touchscreen size is 2040x1080, y-values between + * 1920-2040 are used for touchkey (menu, home & back). + * For now clip it off so we don't get touch events + * outside of the display area. + */ + syna,clip-y-high = <1920>; + }; + }; + + led-controller@36 { + compatible = "ti,lm3630a"; + reg = <0x36>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <80>; + }; + }; + + led-controller@68 { + compatible = "si-en,sn3193"; + reg = <0x68>; + + shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + label = "red:status"; + led-max-microamp = <17500>; + }; + + led@2 { + reg = <2>; + label = "green:status"; + led-max-microamp = <17500>; + }; + + led@3 { + reg = <3>; + label = "blue:status"; + led-max-microamp = <17500>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + bq24196_charger: charger@6b { + compatible = "ti,bq24196"; + reg = <0x6b>; + interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + omit-battery-class; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&gcc { + compatible = "qcom,gcc-msm8974pro-ac"; +}; + +&pm8941_coincell { + qcom,rset-ohms = <800>; + qcom,vset-millivolts = <3200>; + + status = "okay"; +}; + +&pm8941_gpios { + gpio_keys_default: gpio-keys-active-state { + pins = "gpio2", "gpio5"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pm8941_vib { + status = "okay"; +}; + +&pronto { + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "okay"; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-allow-set-load; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + + status = "okay"; +}; + +&smbb { + status = "okay"; +}; + +&tlmm { + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio68"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + touch_default_state: touch-default-state { + int-pins { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + reset-pins { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active-state { + wlan-pins { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + drive-strength = <6>; + bias-pull-down; + }; + + bt-pins { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&usb { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts b/dts/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts new file mode 100644 index 0000000000..b93539e2b8 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts @@ -0,0 +1,817 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "pma8084.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Samsung Galaxy S5"; + compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + aliases { + serial0 = &blsp1_uart1; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC2 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-home { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; + }; + + i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_gpioex_pins>; + + i2c-gpio,delay-us = <2>; + + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + }; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_pins_active>; + pinctrl-1 = <&blsp2_uart2_pins_sleep>; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&tlmm>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + status = "okay"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + + vddio-supply = <&pma8084_l12>; +}; + +&pma8084_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + }; + + touchkey_pin: touchkey-int-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + touch_pin: touchscreen-int-state { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + panel_en_pin: panel-en-state { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + wlan_sleep_clk_pin: wlan-sleep-clk-state { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; + + panel_rst_pin: panel-rst-state { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + fuelgauge_pin: fuelgauge-int-state { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; +}; + +&remoteproc_adsp { + status = "okay"; + cx-supply = <&pma8084_s2>; +}; + +&remoteproc_mss { + status = "okay"; + cx-supply = <&pma8084_s2>; + mss-supply = <&pma8084_s6>; + mx-supply = <&pma8084_s1>; + pll-supply = <&pma8084_l12>; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pma8084-regulators"; + + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; +}; + +&sdhc_3 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + /* + * cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>; + /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ +}; + +&tlmm { + /* This seems suspicious, but somebody with this device should look into it. */ + blsp2_uart2_pins_active: blsp2-uart2-pins-active-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart8"; + drive-strength = <8>; + bias-disable; + }; + + blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + bt_pins: bt-pins-state { + hostwake-pins { + pins = "gpio75"; + function = "gpio"; + drive-strength = <16>; + }; + + devwake-pins { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + }; + }; + + sdc1_on: sdhc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdc3_on: sdc3-on-state { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + + sdhc3_cd_pin: sdc3-cd-on-state { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_on: sdhc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c_touchkey_pins: i2c-touchkey-state { + pins = "gpio95", "gpio96"; + function = "gpio"; + bias-pull-up; + }; + + i2c_led_gpioex_pins: i2c-led-gpioex-state { + pins = "gpio120", "gpio121"; + function = "gpio"; + bias-pull-down; + }; + + gpioex_pin: gpioex-state { + pins = "gpio145"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + wifi_pin: wifi-state { + pins = "gpio92"; + function = "gpio"; + bias-pull-down; + }; + + panel_te_pin: panel-state { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; +}; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/dts/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts new file mode 100644 index 0000000000..ee94741a26 --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -0,0 +1,705 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia Z2 Tablet"; + compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "tablet"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + vreg_bl_vddio: lcd-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_bl_vddio"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + gpio = <&tlmm 69 0>; + enable-active-high; + + vin-supply = <&pm8941_s3>; + startup-delay-us = <70000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_backlight_en_pin_a>; + }; + + vreg_vsp: lcd-dcdc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_vsp"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + + gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_dcdc_en_pin_a>; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupt-parent = <&tlmm>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <100>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + touchscreen-inverted-x; + }; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + lp8566_wled: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + power-supply = <&vreg_bl_vddio>; + + bl-name = "backlight"; + dev-ctrl = /bits/ 8 <0x05>; + init-brt = /bits/ 8 <0x3f>; + + rom-a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + rom-a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + rom-a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + rom-a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + rom-a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x02>; + }; + rom-a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x04>; + }; + rom-a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + rom-a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf7>; + }; + rom-a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0x80>; + }; + rom-aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x0f>; + }; + rom-aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; + }; +}; + +&blsp2_uart1 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>; + + host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; + }; +}; + +&pm8941_coincell { + status = "okay"; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + bt_reg_on_pin: bt-reg-on-state { + pins = "gpio16"; + function = "normal"; + + output-low; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_sleep_clk_pin: wl-sleep-clk-state { + pins = "gpio17"; + function = "func2"; + + output-high; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_regulator_pin: wl-reg-active-state { + pins = "gpio18"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state { + pins = "gpio20"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + input-disable; + output-low; + }; + +}; + +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + status = "okay"; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + usb-charge-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&tlmm { + lcd_backlight_en_pin_a: lcd-backlight-vddio-state { + pins = "gpio69"; + function = "gpio"; + drive-strength = <10>; + output-low; + bias-disable; + }; + + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd-pins { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc3_on: sdc3-on-state { + clk-pins { + pins = "gpio40"; + function = "sdc3"; + drive-strength = <10>; + bias-disable; + }; + + cmd-pins { + pins = "gpio39"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + ts_int_pin: ts-int-pin-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + bt_host_wake_pin: bt-host-wake-state { + pins = "gpio95"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + bt_dev_wake_pin: bt-dev-wake-state { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&usb { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; +}; + +&usb_hs1_phy { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; +}; diff --git a/dts/src/arm/qcom/qcom-msm8974pro.dtsi b/dts/src/arm/qcom/qcom-msm8974pro.dtsi new file mode 100644 index 0000000000..58df6e75ab --- /dev/null +++ b/dts/src/arm/qcom/qcom-msm8974pro.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" + +&gcc { + compatible = "qcom,gcc-msm8974pro"; +}; + +&gpu { + compatible = "qcom,adreno-330.2", "qcom,adreno"; +}; + +&sdhc_1 { + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, + <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; + clock-names = "iface", "core", "xo", "cal", "sleep"; +}; diff --git a/dts/src/arm/qcom/qcom-sdx55-mtp.dts b/dts/src/arm/qcom/qcom-sdx55-mtp.dts new file mode 100644 index 0000000000..2470693619 --- /dev/null +++ b/dts/src/arm/qcom/qcom-sdx55-mtp.dts @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Ltd. + */ + +/dts-v1/; + +#include "qcom-sdx55.dtsi" +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <arm64/qcom/pm8150b.dtsi> +#include "pmx55.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDX55 MTP"; + compatible = "qcom,sdx55-mtp", "qcom,sdx55"; + qcom,board-id = <0x5010008 0x0>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_debug_mem: memory@8ef00000 { + no-map; + reg = <0x8ef00000 0x800000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90c00000 { + no-map; + reg = <0x90c00000 0xd400000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx55-bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s7e_mx_0p752: pmx55-s7e { + compatible = "regulator-fixed"; + regulator-name = "vreg_s7e_mx_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmx55-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-l1-l2-supply = <&vreg_s2e_1p224>; + vdd-l3-l9-supply = <&vreg_s3e_0p824>; + vdd-l4-l12-supply = <&vreg_s4e_1p904>; + vdd-l5-l6-supply = <&vreg_s4e_1p904>; + vdd-l7-l8-supply = <&vreg_s3e_0p824>; + vdd-l10-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l14-supply = <&vreg_s7e_mx_0p752>; + vdd-l15-supply = <&vreg_s2e_1p224>; + vdd-l16-supply = <&vreg_s4e_1p904>; + + vreg_s2e_1p224: smps2 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3e_0p824: smps3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s4e_1p904: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1960000>; + }; + + vreg_l1e_bb_1p2: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4e_bb_0p875: ldo4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <872000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5e_bb_1p7: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo7 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo8 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10e_3p1: ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; + +&remoteproc_mpss { + memory-region = <&mpss_adsp_mem>; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + vdda33-supply = <&vreg_l10e_3p1>; + vdda18-supply = <&vreg_l5e_bb_1p7>; +}; + +&usb_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l4e_bb_0p875>; + vdda-pll-supply = <&vreg_l1e_bb_1p2>; +}; diff --git a/dts/src/arm/qcom/qcom-sdx55-t55.dts b/dts/src/arm/qcom/qcom-sdx55-t55.dts new file mode 100644 index 0000000000..082f7ed1a0 --- /dev/null +++ b/dts/src/arm/qcom/qcom-sdx55-t55.dts @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qcom-sdx55.dtsi" +#include "pmx55.dtsi" + +/ { + model = "Thundercomm T55 Development Kit"; + compatible = "qcom,sdx55-t55", "qcom,sdx55"; + qcom,board-id = <0xb010008 0x4>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_debug_mem: memory@8ef00000 { + no-map; + reg = <0x8ef00000 0x800000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90800000 { + no-map; + reg = <0x90800000 0xf800000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx55-bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s7e_mx_0p752: pmx55-s7e { + compatible = "regulator-fixed"; + regulator-name = "vreg_s7e_mx_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + + vin-supply = <&vph_pwr>; + }; + + vreg_sd_vdd: sd-vdd { + compatible = "regulator-fixed"; + regulator-name = "vreg_sd_vdd"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + vin-supply = <&vreg_vddpx_2>; + }; + + vreg_vddpx_2: vddpx-2 { + compatible = "regulator-gpio"; + regulator-name = "vreg_vddpx_2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; + states = <1800000 0>, <2850000 1>; + startup-delay-us = <200000>; + enable-active-high; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmx55-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-l1-l2-supply = <&vreg_s2e_1p224>; + vdd-l3-l9-supply = <&vreg_s3e_0p824>; + vdd-l4-l12-supply = <&vreg_s4e_1p904>; + vdd-l5-l6-supply = <&vreg_s4e_1p904>; + vdd-l7-l8-supply = <&vreg_s3e_0p824>; + vdd-l10-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l14-supply = <&vreg_s7e_mx_0p752>; + vdd-l15-supply = <&vreg_s2e_1p224>; + vdd-l16-supply = <&vreg_s4e_1p904>; + + vreg_s2e_1p224: smps2 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3e_0p824: smps3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s4e_1p904: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1960000>; + }; + + vreg_l1e_bb_1p2: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4e_bb_0p875: ldo4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <872000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5e_bb_1p7: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo7 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo8 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10e_3p1: ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + status = "okay"; +}; + +&pcie_phy { + vdda-phy-supply = <&vreg_l1e_bb_1p2>; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + + status = "okay"; +}; + +&pcie_rc { + perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + /* efs2 partition is secured */ + secure-regions = /bits/ 64 <0x500000 0xb00000>; + }; +}; + +&remoteproc_mpss { + memory-region = <&mpss_adsp_mem>; + status = "okay"; +}; + +&tlmm { + pcie_default: pcie-default-state { + clkreq-pins { + pins = "gpio56"; + function = "pcie_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-pins { + pins = "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&usb_hsphy { + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + vdda33-supply = <&vreg_l10e_3p1>; + vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4e_bb_0p875>; + vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/dts/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts b/dts/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts new file mode 100644 index 0000000000..e336a15b45 --- /dev/null +++ b/dts/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qcom-sdx55.dtsi" +#include "pmx55.dtsi" + +/ { + model = "Telit FN980 TLB"; + compatible = "qcom,sdx55-telit-fn980-tlb", "qcom,sdx55"; + qcom,board-id = <0xb010008 0x0>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_debug_mem: memory@8ef00000 { + no-map; + reg = <0x8ef00000 0x800000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90800000 { + no-map; + reg = <0x90800000 0xf800000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx55-bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s7e_mx_0p752: pmx55-s7e { + compatible = "regulator-fixed"; + regulator-name = "vreg_s7e_mx_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + + vin-supply = <&vph_pwr>; + }; + + vreg_sd_vdd: sd-vdd { + compatible = "regulator-fixed"; + regulator-name = "vreg_sd_vdd"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + vin-supply = <&vreg_vddpx_2>; + }; + + vreg_vddpx_2: vddpx-2 { + compatible = "regulator-gpio"; + regulator-name = "vreg_vddpx_2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; + states = <1800000 0>, <2850000 1>; + startup-delay-us = <200000>; + enable-active-high; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmx55-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-l1-l2-supply = <&vreg_s2e_1p224>; + vdd-l3-l9-supply = <&vreg_s3e_0p824>; + vdd-l4-l12-supply = <&vreg_s4e_1p904>; + vdd-l5-l6-supply = <&vreg_s4e_1p904>; + vdd-l7-l8-supply = <&vreg_s3e_0p824>; + vdd-l10-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l14-supply = <&vreg_s7e_mx_0p752>; + vdd-l15-supply = <&vreg_s2e_1p224>; + vdd-l16-supply = <&vreg_s4e_1p904>; + + vreg_s2e_1p224: smps2 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3e_0p824: smps3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s4e_1p904: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1960000>; + }; + + vreg_l1e_bb_1p2: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4e_bb_0p875: ldo4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <872000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5e_bb_1p7: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo7 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo8 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10e_3p1: ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + status = "okay"; +}; + +&pcie_phy { + vdda-phy-supply = <&vreg_l1e_bb_1p2>; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + + status = "okay"; +}; + +&pcie_ep { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default + &pcie_ep_wake_default>; + + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + /* ico and efs2 partitions are secured */ + secure-regions = /bits/ 64 <0x500000 0x500000 + 0xa00000 0xb00000>; + }; +}; + +&remoteproc_mpss { + memory-region = <&mpss_adsp_mem>; + status = "okay"; +}; + +&tlmm { + pcie_ep_clkreq_default: pcie-ep-clkreq-default-state { + pins = "gpio56"; + function = "pcie_clkreq"; + drive-strength = <2>; + bias-disable; + }; + + pcie_ep_perst_default: pcie-ep-perst-default-state { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + pcie_ep_wake_default: pcie-ep-wake-default-state { + pins = "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&usb_hsphy { + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + vdda33-supply = <&vreg_l10e_3p1>; + vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4e_bb_0p875>; + vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/dts/src/arm/qcom/qcom-sdx55.dtsi b/dts/src/arm/qcom/qcom-sdx55.dtsi new file mode 100644 index 0000000000..edc9aaf828 --- /dev/null +++ b/dts/src/arm/qcom/qcom-sdx55.dtsi @@ -0,0 +1,872 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SDX55 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Ltd. + */ + +#include <dt-bindings/clock/qcom,gcc-sdx55.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,sdx55.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>; + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + enable-method = "psci"; + clocks = <&apcs>; + power-domains = <&rpmhpd SDX55_CX>; + power-domain-names = "rpmhpd"; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdx55", "qcom,scm"; + }; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + hyp_mem: memory@8fc00000 { + no-map; + reg = <0x8fc00000 0x80000>; + }; + + ac_db_mem: memory@8fc80000 { + no-map; + reg = <0x8fc80000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + sbl_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x100000>; + }; + + aop_image: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + aop_cmd_db: memory@8fe20000 { + compatible = "qcom,cmd-db"; + reg = <0x8fe20000 0x20000>; + no-map; + }; + + smem_mem: memory@8fe40000 { + no-map; + reg = <0x8fe40000 0xc0000>; + }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdx55"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + blsp1_uart3: serial@831000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x00831000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 30>, + <&gcc 9>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + usb_hsphy: phy@ff4000 { + compatible = "qcom,sdx55-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0x00ff4000 0x114>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_BCR>; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx55-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x1000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + status = "disabled"; + }; + + mc_virt: interconnect@1100000 { + compatible = "qcom,sdx55-mc-virt"; + reg = <0x01100000 0x400000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mem_noc: interconnect@9680000 { + compatible = "qcom,sdx55-mem-noc"; + reg = <0x09680000 0x40000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@162c000 { + compatible = "qcom,sdx55-system-noc"; + reg = <0x0162c000 0x31200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qpic_bam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x01b04000 0x1c000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + status = "disabled"; + }; + + qpic_nand: nand-controller@1b30000 { + compatible = "qcom,sdx55-nand"; + reg = <0x01b30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmhcc RPMH_QPIC_CLK>, + <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + + pcie_rc: pcie@1c00000 { + compatible = "qcom,pcie-sdx55"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40100000 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_PIPE_CLK>, + <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep"; + + assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommu-map = <0x0 &apps_smmu 0x0200 0x1>, + <0x100 &apps_smmu 0x0201 0x1>, + <0x200 &apps_smmu 0x0202 0x1>, + <0x300 &apps_smmu 0x0203 0x1>, + <0x400 &apps_smmu 0x0204 0x1>; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_GDSC>; + + phys = <&pcie_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie_ep: pcie-ep@1c00000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep", + "ref"; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", + "doorbell"; + + interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "pcie-mem"; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie_phy>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + + pcie_phy: phy@1c06000 { + compatible = "qcom,sdx55-qmp-pcie-phy"; + reg = <0x01c06000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE_RCHNG_PHY_CLK>, + <&gcc GCC_PCIE_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + + resets = <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sdx55-ipa"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + reg = <0x1e40000 0x7000>, + <0x1e50000 0x4b20>, + <0x1e04000 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>, + <&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>, + <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1fc0000 { + compatible = "qcom,sdx55-tcsr", "syscon"; + reg = <0x01fc0000 0x1000>; + }; + + sdhc_1: mmc@8804000 { + compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sdx55-mpss-pas"; + reg = <0x04080000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SDX55_CX>, + <&rpmhpd SDX55_MSS>; + power-domain-names = "cx", "mss"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs 15>; + }; + }; + + usb: usb@a6f8800 { + compatible = "qcom,sdx55-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, + <&pdc 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b210000 { + compatible = "qcom,sdx55-pdc", "qcom,pdc"; + reg = <0x0b210000 0x30000>; + qcom,pdc-ranges = <0 179 52>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0x0c264000 0x1000>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0c440000 0x0000d00>, + <0x0c600000 0x2000000>, + <0x0e600000 0x0100000>, + <0x0e700000 0x00a0000>, + <0x0c40a000 0x0000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx55-pinctrl"; + reg = <0xf100000 0x300000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 108>; + }; + + sram@1468f000 { + compatible = "qcom,sdx55-imem", "syscon", "simple-mfd"; + reg = <0x1468f000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x1468f000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0x200>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17800000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + interrupt-parent = <&intc>; + #interrupt-cells = <3>; + reg = <0x17800000 0x1000>, + <0x17802000 0x1000>; + }; + + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; + + apcs: mailbox@17810000 { + compatible = "qcom,sdx55-apcs-gcc", "syscon"; + reg = <0x17810000 0x2000>; + #mbox-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; + clock-names = "ref", "pll", "aux"; + #clock-cells = <0>; + }; + + watchdog@17817000 { + compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt"; + reg = <0x17817000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@17820000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17820000 0x1000>; + clock-frequency = <19200000>; + + frame@17821000 { + frame-number = <0>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17821000 0x1000>, + <0x17822000 0x1000>; + }; + + frame@17823000 { + frame-number = <1>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17823000 0x1000>; + status = "disabled"; + }; + + frame@17824000 { + frame-number = <2>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17824000 0x1000>; + status = "disabled"; + }; + + frame@17825000 { + frame-number = <3>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17825000 0x1000>; + status = "disabled"; + }; + + frame@17826000 { + frame-number = <4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17826000 0x1000>; + status = "disabled"; + }; + + frame@17827000 { + frame-number = <5>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17827000 0x1000>; + status = "disabled"; + }; + + frame@17828000 { + frame-number = <6>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17828000 0x1000>; + status = "disabled"; + }; + + frame@17829000 { + frame-number = <7>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17829000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17830000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x17830000 0x10000>, <0x17840000 0x10000>; + reg-names = "drv-0", "drv-1"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <1>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sdx55-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sdx55-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; diff --git a/dts/src/arm/qcom/qcom-sdx65-mtp.dts b/dts/src/arm/qcom/qcom-sdx65-mtp.dts new file mode 100644 index 0000000000..07c10c84ee --- /dev/null +++ b/dts/src/arm/qcom/qcom-sdx65-mtp.dts @@ -0,0 +1,342 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + */ +/dts-v1/; + +/* PM7250B is configured to use SID2/3 */ +#define PM7250B_SID 2 +#define PM7250B_SID1 3 + +#include "qcom-sdx65.dtsi" +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <arm64/qcom/pmk8350.dtsi> +#include <arm64/qcom/pm7250b.dtsi> +#include "pmx65.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDX65 MTP"; + compatible = "qcom,sdx65-mtp", "qcom,sdx65"; + qcom,board-id = <0x2010008 0x302>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_dsm: memory@8c400000 { + no-map; + reg = <0x8c400000 0x3200000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90800000 { + no-map; + reg = <0x90800000 0x10000000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx65_bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmx65-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-supply = <&vreg_s2b_1p224>; + vdd-l2-l18-supply = <&vreg_s2b_1p224>; + vdd-l3-supply = <&vreg_s8b_0p824>; + vdd-l4-supply = <&vreg_s7b_0p936>; + vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>; + vdd-l7-supply = <&vreg_s3b_0p776>; + vdd-l8-l9-supply = <&vreg_s8b_0p824>; + vdd-l10-supply = <&vreg_bob_3p3>; + vdd-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l12-supply = <&vreg_s2b_1p224>; + vdd-l14-supply = <&vreg_s3b_0p776>; + vdd-l15-supply = <&vreg_s2b_1p224>; + vdd-l17-supply = <&vreg_s8b_0p824>; + vdd-l19-supply = <&vreg_s3b_0p776>; + vdd-l20-supply = <&vreg_s7b_0p936>; + vdd-l21-supply = <&vreg_s7b_0p936>; + + vreg_s2b_1p224: smps2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3b_0p776: smps3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s4b_1p824: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s7b_0p936: smps7 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s8b_0p824: smps8 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_l1b_1p2: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo3 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_0p88: ldo4 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_1p8: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo7 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo8 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_3p08: ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo16 { + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo17 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo19 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo20 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo21 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "skip"; + status = "okay"; +}; + +&pcie_ep { + pinctrl-0 = <&pcie_ep_clkreq_default + &pcie_ep_perst_default + &pcie_ep_wake_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&pcie_phy { + vdda-phy-supply = <&vreg_l1b_1p2>; + vdda-pll-supply = <&vreg_l4b_0p88>; + + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + /* ico and efs2 partitions are secured */ + secure-regions = /bits/ 64 <0x500000 0x500000 + 0xa00000 0xb00000>; + }; +}; + +&remoteproc_mpss { + memory-region = <&mpss_adsp_mem>; + status = "okay"; +}; + +&tlmm { + pcie_ep_clkreq_default: pcie-ep-clkreq-default-state { + pins = "gpio56"; + function = "pcie_clkreq"; + drive-strength = <2>; + bias-disable; + }; + + pcie_ep_perst_default: pcie-ep-perst-default-state { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + pcie_ep_wake_default: pcie-ep-wake-default-state { + pins = "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdda-pll-supply = <&vreg_l4b_0p88>; + vdda33-supply = <&vreg_l10b_3p08>; + vdda18-supply = <&vreg_l5b_1p8>; + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4b_0p88>; + vdda-pll-supply = <&vreg_l1b_1p2>; + status = "okay"; +}; diff --git a/dts/src/arm/qcom/qcom-sdx65.dtsi b/dts/src/arm/qcom/qcom-sdx65.dtsi new file mode 100644 index 0000000000..a949454212 --- /dev/null +++ b/dts/src/arm/qcom/qcom-sdx65.dtsi @@ -0,0 +1,815 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SDX65 SoC device tree source + * + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. + * + */ + +#include <dt-bindings/clock/qcom,gcc-sdx65.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/interconnect/qcom,sdx65.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>; + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + clock-output-names = "xo_board"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + #clock-cells = <0>; + }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + enable-method = "psci"; + clocks = <&apcs>; + power-domains = <&rpmhpd SDX65_CX_AO>; + power-domain-names = "rpmhpd"; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdx65", "qcom,scm"; + }; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sdx65-mc-virt"; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tz_heap_mem: memory@8fcad000 { + no-map; + reg = <0x8fcad000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + hyp_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x80000>; + }; + + access_control_mem: memory@8fd80000 { + no-map; + reg = <0x8fd80000 0x80000>; + }; + + aop_mem: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + smem_mem: memory@8fe20000 { + compatible = "qcom,smem"; + reg = <0x8fe20000 0xc0000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + cmd_db: reserved-memory@8fee0000 { + compatible = "qcom,cmd-db"; + reg = <0x8fee0000 0x20000>; + no-map; + }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + + llcc_tcm_mem: memory@15800000 { + no-map; + reg = <0x15800000 0x800000>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdx65"; + reg = <0x00100000 0x001f7400>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie_phy>, + <0>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk", + "pcie_pipe_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; + #power-domain-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + blsp1_uart3: serial@831000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x00831000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + usb_hsphy: phy@ff4000 { + compatible = "qcom,sdx65-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0xff4000 0x120>; + #phy-cells = <0>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_BCR>; + status = "disabled"; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx65-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x2000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_EN>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + status = "disabled"; + + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sdx65-system-noc"; + reg = <0x01620000 0x31200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qpic_bam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x01b04000 0x1c000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + status = "disabled"; + }; + + qpic_nand: nand-controller@1b30000 { + compatible = "qcom,sdx55-nand"; + reg = <0x01b30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmhcc RPMH_QPIC_CLK>, + <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + + pcie_ep: pcie-ep@1c00000 { + compatible = "qcom,sdx65-pcie-ep", "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xa8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep", + "ref"; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", "doorbell"; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + + power-domains = <&gcc PCIE_GDSC>; + + phys = <&pcie_phy>; + phy-names = "pciephy"; + + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + + pcie_phy: phy@1c06000 { + compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy"; + reg = <0x01c06000 0x2000>; + + clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_RCHNG_PHY_CLK>, + <&gcc GCC_PCIE_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1fcb000 { + compatible = "qcom,sdx65-tcsr", "syscon"; + reg = <0x01fc0000 0x1000>; + }; + + ipa: ipa@3f40000 { + compatible = "qcom,sdx65-ipa"; + + reg = <0x03f40000 0x10000>, + <0x03f50000 0x5000>, + <0x03e04000 0xfc000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>, + <&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sdx55-mpss-pas"; + reg = <0x04080000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SDX65_CX>, + <&rpmhpd SDX65_MSS>; + power-domain-names = "cx", "mss"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs 15>; + }; + }; + + sdhc_1: mmc@8804000 { + compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + reg-names = "hc"; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + + mem_noc: interconnect@9680000 { + compatible = "qcom,sdx65-mem-noc"; + reg = <0x09680000 0x27200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb: usb@a6f8800 { + compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 19 IRQ_TYPE_EDGE_BOTH>, + <&pdc 18 IRQ_TYPE_EDGE_BOTH>, + <&pdc 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + status = "disabled"; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0x0c264000 0x1000>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xc440000 0xd00>, + <0xc600000 0x2000000>, + <0xe600000 0x100000>, + <0xe700000 0xa0000>, + <0xc40a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + qcom,channel = <0>; + qcom,ee = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx65-tlmm"; + reg = <0xf100000 0x300000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 109>; + interrupt-controller; + interrupt-parent = <&intc>; + #interrupt-cells = <2>; + }; + + pdc: interrupt-controller@b210000 { + compatible = "qcom,sdx65-pdc", "qcom,pdc"; + reg = <0xb210000 0x10000>; + qcom,pdc-ranges = <0 147 52>, <52 266 32>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + sram@1468f000 { + compatible = "qcom,sdx65-imem", "syscon", "simple-mfd"; + reg = <0x1468f000 0x1000>; + ranges = <0x0 0x1468f000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17800000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + interrupt-parent = <&intc>; + #interrupt-cells = <3>; + reg = <0x17800000 0x1000>, + <0x17802000 0x1000>; + }; + + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; + + apcs: mailbox@17810000 { + compatible = "qcom,sdx55-apcs-gcc", "syscon"; + reg = <0x17810000 0x2000>; + #mbox-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; + clock-names = "ref", "pll", "aux"; + #clock-cells = <0>; + }; + + watchdog@17817000 { + compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt"; + reg = <0x17817000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@17820000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17820000 0x1000>; + clock-frequency = <19200000>; + + frame@17821000 { + frame-number = <0>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17821000 0x1000>, + <0x17822000 0x1000>; + }; + + frame@17823000 { + frame-number = <1>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17823000 0x1000>; + status = "disabled"; + }; + + frame@17824000 { + frame-number = <2>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17824000 0x1000>; + status = "disabled"; + }; + + frame@17825000 { + frame-number = <3>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17825000 0x1000>; + status = "disabled"; + }; + + frame@17826000 { + frame-number = <4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17826000 0x1000>; + status = "disabled"; + }; + + frame@17827000 { + frame-number = <5>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17827000 0x1000>; + status = "disabled"; + }; + + frame@17828000 { + frame-number = <6>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17828000 0x1000>; + status = "disabled"; + }; + + frame@17829000 { + frame-number = <7>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17829000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17830000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x17830000 0x10000>, + <0x17840000 0x10000>; + reg-names = "drv-0", "drv-1"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <1>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 2>, + <WAKE_TCS 2>, + <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sdx65-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sdx65-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; |