diff options
Diffstat (limited to 'dts/src/arm/r8a7742-iwg21d-q7-dbcm-ca.dts')
-rw-r--r-- | dts/src/arm/r8a7742-iwg21d-q7-dbcm-ca.dts | 329 |
1 files changed, 0 insertions, 329 deletions
diff --git a/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ca.dts b/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ca.dts deleted file mode 100644 index 2bcb229844..0000000000 --- a/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ca.dts +++ /dev/null @@ -1,329 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the iWave-RZ/G1H Qseven board development - * platform with camera daughter board - * - * Copyright (C) 2020 Renesas Electronics Corp. - */ - -/dts-v1/; -#include "r8a7742-iwg21d-q7.dts" - -/ { - model = "iWave Systems RZ/G1H Qseven development platform with camera add-on"; - compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742"; - - aliases { - serial0 = &scif0; - serial1 = &scif1; - serial3 = &scifb1; - serial5 = &hscif0; - ethernet1 = ðer; - }; - - mclk_cam1: mclk-cam1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - mclk_cam2: mclk-cam2 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - mclk_cam3: mclk-cam3 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - mclk_cam4: mclk-cam4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; -}; - -&avb { - /* Pins shared with VIN0, keep status disabled */ - status = "disabled"; -}; - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -ðer { - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy1>; - renesas,ether-link-active-low; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - micrel,led-mode = <1>; - }; -}; - -&gpio0 { - /* Disable hogging GP0_18 to output LOW */ - /delete-node/ qspi_en; - - /* Hog GP0_18 to output HIGH to enable VIN2 */ - vin2_en { - gpio-hog; - gpios = <18 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "VIN2_EN"; - }; -}; - -&hscif0 { - pinctrl-0 = <&hscif0_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - /* status set to "okay" when needed by camera configuration below */ - clock-frequency = <400000>; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - - /* status set to "okay" when needed by camera configuration below */ - clock-frequency = <400000>; -}; - -&pfc { - can0_pins: can0 { - groups = "can0_data_d"; - function = "can0"; - }; - - ether_pins: ether { - groups = "eth_mdio", "eth_rmii"; - function = "eth"; - }; - - hscif0_pins: hscif0 { - groups = "hscif0_data", "hscif0_ctrl"; - function = "hscif0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1_c"; - function = "i2c1"; - }; - - i2c3_pins: i2c3 { - groups = "i2c3"; - function = "i2c3"; - }; - - scif0_pins: scif0 { - groups = "scif0_data"; - function = "scif0"; - }; - - scif1_pins: scif1 { - groups = "scif1_data"; - function = "scif1"; - }; - - scifb1_pins: scifb1 { - groups = "scifb1_data"; - function = "scifb1"; - }; - - vin0_8bit_pins: vin0 { - groups = "vin0_data8", "vin0_clk", "vin0_sync"; - function = "vin0"; - }; - - vin1_8bit_pins: vin1 { - groups = "vin1_data8_b", "vin1_clk_b", "vin1_sync_b"; - function = "vin1"; - }; - - vin2_pins: vin2 { - groups = "vin2_g8", "vin2_clk"; - function = "vin2"; - }; - - vin3_pins: vin3 { - groups = "vin3_data8", "vin3_clk", "vin3_sync"; - function = "vin3"; - }; -}; - -&qspi { - /* Pins shared with VIN2, keep status disabled */ - status = "disabled"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&scif1 { - pinctrl-0 = <&scif1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&scifb1 { - pinctrl-0 = <&scifb1_pins>; - pinctrl-names = "default"; - status = "okay"; - - rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; -}; - -/* - * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints - * - * (un)comment the #include statements to change configuration - */ - -/* 8bit CMOS Camera 1 (J13) */ -#define CAM_PARENT_I2C i2c0 -#define MCLK_CAM mclk_cam1 -#define CAM_EP cam0ep -#define VIN_EP vin0ep -#undef CAM_ENABLED -#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" -//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" - -#ifdef CAM_ENABLED -&vin0 { - /* - * Set SW2 switch on the SOM to 'ON' - * Set SW1 switch on camera board to 'OFF' as we are using 8bit mode - */ - status = "okay"; - pinctrl-0 = <&vin0_8bit_pins>; - pinctrl-names = "default"; - - port { - vin0ep: endpoint { - remote-endpoint = <&cam0ep>; - bus-width = <8>; - bus-type = <6>; - }; - }; -}; -#endif /* CAM_ENABLED */ - -#undef CAM_PARENT_I2C -#undef MCLK_CAM -#undef CAM_EP -#undef VIN_EP - -/* 8bit CMOS Camera 2 (J14) */ -#define CAM_PARENT_I2C i2c1 -#define MCLK_CAM mclk_cam2 -#define CAM_EP cam1ep -#define VIN_EP vin1ep -#undef CAM_ENABLED -#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" -//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" - -#ifdef CAM_ENABLED -&vin1 { - /* Set SW1 switch on the SOM to 'ON' */ - status = "okay"; - pinctrl-0 = <&vin1_8bit_pins>; - pinctrl-names = "default"; - - port { - vin1ep: endpoint { - remote-endpoint = <&cam1ep>; - bus-width = <8>; - bus-type = <6>; - }; - }; -}; - -#endif /* CAM_ENABLED */ - -#undef CAM_PARENT_I2C -#undef MCLK_CAM -#undef CAM_EP -#undef VIN_EP - -/* 8bit CMOS Camera 3 (J12) */ -#define CAM_PARENT_I2C i2c2 -#define MCLK_CAM mclk_cam3 -#define CAM_EP cam2ep -#define VIN_EP vin2ep -#undef CAM_ENABLED -#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" -//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" - -#ifdef CAM_ENABLED -&vin2 { - status = "okay"; - pinctrl-0 = <&vin2_pins>; - pinctrl-names = "default"; - - port { - vin2ep: endpoint { - remote-endpoint = <&cam2ep>; - bus-width = <8>; - data-shift = <8>; - bus-type = <6>; - }; - }; -}; -#endif /* CAM_ENABLED */ - -#undef CAM_PARENT_I2C -#undef MCLK_CAM -#undef CAM_EP -#undef VIN_EP - -/* 8bit CMOS Camera 4 (J11) */ -#define CAM_PARENT_I2C i2c3 -#define MCLK_CAM mclk_cam4 -#define CAM_EP cam3ep -#define VIN_EP vin3ep -#undef CAM_ENABLED -#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" -//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" - -#ifdef CAM_ENABLED -&vin3 { - status = "okay"; - pinctrl-0 = <&vin3_pins>; - pinctrl-names = "default"; - - port { - vin3ep: endpoint { - remote-endpoint = <&cam3ep>; - bus-width = <8>; - bus-type = <6>; - }; - }; -}; -#endif /* CAM_ENABLED */ - -#undef CAM_PARENT_I2C -#undef MCLK_CAM -#undef CAM_EP -#undef VIN_EP |