diff options
Diffstat (limited to 'dts/src/arm/r8a7742-iwg21d-q7.dts')
| -rw-r--r-- | dts/src/arm/r8a7742-iwg21d-q7.dts | 443 |
1 files changed, 0 insertions, 443 deletions
diff --git a/dts/src/arm/r8a7742-iwg21d-q7.dts b/dts/src/arm/r8a7742-iwg21d-q7.dts deleted file mode 100644 index 94bf8a116b..0000000000 --- a/dts/src/arm/r8a7742-iwg21d-q7.dts +++ /dev/null @@ -1,443 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the iWave-RZ/G1H Qseven board - * - * Copyright (C) 2020 Renesas Electronics Corp. - */ - -/* - * SSI-SGTL5000 - * - * This command is required when Playback/Capture - * - * amixer set "DVC Out" 100% - * amixer set "DVC In" 100% - * - * You can use Mute - * - * amixer set "DVC Out Mute" on - * amixer set "DVC In Mute" on - * - * You can use Volume Ramp - * - * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" - * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" - * amixer set "DVC Out Ramp" on - * aplay xxx.wav & - * amixer set "DVC Out" 80% // Volume Down - * amixer set "DVC Out" 100% // Volume Up - */ - -/dts-v1/; -#include "r8a7742-iwg21m.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H"; - compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742"; - - aliases { - serial2 = &scifa2; - serial4 = &scifb2; - ethernet0 = &avb; - }; - - chosen { - bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait"; - stdout-path = "serial2:115200n8"; - }; - - audio_clock: audio_clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - lcd_backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&tpu 2 5000000 0>; - brightness-levels = <0 4 8 16 32 64 128 255>; - pinctrl-0 = <&backlight_pins>; - pinctrl-names = "default"; - default-brightness-level = <7>; - enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - - sdhi2_led { - label = "sdio-led"; - gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - }; - }; - - lvds-receiver { - compatible = "ti,ds90cf384a", "lvds-decoder"; - power-supply = <&vcc_3v3_tft1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - lvds_receiver_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - port@1 { - reg = <1>; - lvds_receiver_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; - - panel { - compatible = "edt,etm0700g0dh6"; - backlight = <&lcd_backlight>; - power-supply = <&vcc_3v3_tft1>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds_receiver_out>; - }; - }; - }; - - reg_1p5v: 1p5v { - compatible = "regulator-fixed"; - regulator-name = "1P5V"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - rsnd_sgtl5000: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&sgtl5000>; - }; - }; - - vcc_3v3_tft1: regulator-panel { - compatible = "regulator-fixed"; - - regulator-name = "vcc-3v3-tft1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - startup-delay-us = <500>; - gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>; - }; - - vcc_sdhi2: regulator-vcc-sdhi2 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI2 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; - }; - - vccq_sdhi2: regulator-vccq-sdhi2 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI2 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; - status = "okay"; - - phy3: ethernet-phy@3 { - reg = <3>; - micrel,led-mode = <1>; - }; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - #sound-dai-cells = <0>; - reg = <0x0a>; - clocks = <&audio_clock>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - VDDD-supply = <®_1p5v>; - }; - - touch: touchpanel@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&gpio0>; - interrupts = <24 IRQ_TYPE_EDGE_FALLING>; - /* GP1_29 is also shared with audio codec reset pin */ - reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - vcc-supply = <&vcc_3v3_tft1>; - }; -}; - -&can1 { - pinctrl-0 = <&can1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&cmt0 { - status = "okay"; -}; - -&du { - status = "okay"; -}; - -&gpio0 { - touch-interrupt { - gpio-hog; - gpios = <24 GPIO_ACTIVE_LOW>; - input; - }; -}; - -&gpio1 { - can-trx-en-gpio{ - gpio-hog; - gpios = <28 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "can-trx-en-gpio"; - }; -}; - -&hsusb { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&lvds0 { - status = "okay"; - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&lvds_receiver_in>; - }; - }; - }; -}; - -&msiof0 { - pinctrl-0 = <&msiof0_pins>; - pinctrl-names = "default"; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; - - status = "okay"; - - flash1: flash@0 { - compatible = "sst,sst25vf016b", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "user"; - reg = <0x00000000 0x00200000>; - }; - }; - }; -}; - -&pci0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - /* Disable hsusb to enable USB2.0 host mode support on J2 */ - /* status = "okay"; */ -}; - -&pci1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pci2 { - /* Disable xhci to enable USB2.0 host mode support on J23 bottom port */ - /* status = "okay"; */ -}; - -&pcie_bus_clk { - clock-frequency = <100000000>; -}; - -&pciec { - /* SW2[6] determines which connector is activated - * ON = PCIe X4 (connector-J7) - * OFF = mini-PCIe (connector-J26) - */ - status = "okay"; -}; - -&pfc { - avb_pins: avb { - groups = "avb_mdio", "avb_gmii"; - function = "avb"; - }; - - backlight_pins: backlight { - groups = "tpu0_to2"; - function = "tpu0"; - }; - - can1_pins: can1 { - groups = "can1_data_b"; - function = "can1"; - }; - - i2c2_pins: i2c2 { - groups = "i2c2_b"; - function = "i2c2"; - }; - - msiof0_pins: msiof0 { - groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx"; - function = "msiof0"; - }; - - scifa2_pins: scifa2 { - groups = "scifa2_data_c"; - function = "scifa2"; - }; - - scifb2_pins: scifb2 { - groups = "scifb2_data", "scifb2_ctrl"; - function = "scifb2"; - }; - - sdhi2_pins: sd2 { - groups = "sdhi2_data4", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data4", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <1800>; - }; - - sound_pins: sound { - groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; - function = "ssi"; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - usb1_pins: usb1 { - groups = "usb1_pwen"; - function = "usb1"; - }; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>; - pinctrl-names = "default"; - status = "okay"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - rcar_sound,dai { - dai0 { - playback = <&ssi4>, <&src4>, <&dvc1>; - capture = <&ssi3>, <&src3>, <&dvc0>; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scifa2 { - pinctrl-0 = <&scifa2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scifb2 { - pinctrl-0 = <&scifb2_pins>; - pinctrl-names = "default"; - - uart-has-rtscts; - status = "okay"; -}; - -&sdhi2 { - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi2>; - vqmmc-supply = <&vccq_sdhi2>; - cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - sd-uhs-sdr50; - status = "okay"; -}; - -&ssi4 { - shared-pin; -}; - -&tpu { - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&xhci { - status = "okay"; -}; |