diff options
Diffstat (limited to 'dts/src/arm/r8a7743.dtsi')
| -rw-r--r-- | dts/src/arm/r8a7743.dtsi | 339 |
1 files changed, 331 insertions, 8 deletions
diff --git a/dts/src/arm/r8a7743.dtsi b/dts/src/arm/r8a7743.dtsi index 14222c72f0..7bbba4a36f 100644 --- a/dts/src/arm/r8a7743.dtsi +++ b/dts/src/arm/r8a7743.dtsi @@ -25,6 +25,13 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &iic0; + i2c7 = &iic1; + i2c8 = &iic3; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; }; cpus { @@ -56,6 +63,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; power-domains = <&sysc R8A7743_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -101,7 +109,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -116,7 +124,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -131,7 +139,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -146,7 +154,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -161,7 +169,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -176,7 +184,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -191,7 +199,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -206,7 +214,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -348,6 +356,34 @@ dma-channels = <15>; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + /* The memory map in the User's Manual maps the cores to bus * numbers */ @@ -436,6 +472,58 @@ status = "disabled"; }; + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + + iic3: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7743", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -779,6 +867,241 @@ max-frequency = <97500000>; status = "disabled"; }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7743", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + + /* + * pci1 and xhci share the same phy, therefore only one of them + * can be active at any one time. If both of them are enabled, + * a race condition will determine who'll control the phy. + * A firmware file is needed by the xhci driver in order for + * USB 3.0 to work properly. + */ + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7743", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7743"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7743"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7743"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7743", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7743", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7743", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7743", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; }; /* External root clock */ |