diff options
Diffstat (limited to 'dts/src/arm/r8a7745-iwg22d-sodimm.dts')
| -rw-r--r-- | dts/src/arm/r8a7745-iwg22d-sodimm.dts | 327 |
1 files changed, 0 insertions, 327 deletions
diff --git a/dts/src/arm/r8a7745-iwg22d-sodimm.dts b/dts/src/arm/r8a7745-iwg22d-sodimm.dts deleted file mode 100644 index 73bd62d8a9..0000000000 --- a/dts/src/arm/r8a7745-iwg22d-sodimm.dts +++ /dev/null @@ -1,327 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the iWave-RZG1E SODIMM carrier board - * - * Copyright (C) 2017 Renesas Electronics Corp. - */ - -/* - * SSI-SGTL5000 - * - * This command is required when Playback/Capture - * - * amixer set "DVC Out" 100% - * amixer set "DVC In" 100% - * - * You can use Mute - * - * amixer set "DVC Out Mute" on - * amixer set "DVC In Mute" on - * - * You can use Volume Ramp - * - * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" - * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" - * amixer set "DVC Out Ramp" on - * aplay xxx.wav & - * amixer set "DVC Out" 80% // Volume Down - * amixer set "DVC Out" 100% // Volume Up - */ - -/dts-v1/; -#include "r8a7745-iwg22m.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E"; - compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"; - - aliases { - ethernet0 = &avb; - serial3 = &scif4; - serial5 = &hscif1; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial3:115200n8"; - }; - - audio_clock: audio_clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - backlight_lcd: backlight { - compatible = "pwm-backlight"; - pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <7>; - }; - - lcd_panel: lcd { - compatible = "edt,etm043080dh6gp"; - power-supply = <&vccq_panel>; - backlight = <&backlight_lcd>; - - port { - lcd_in: endpoint { - remote-endpoint = <&du_out_rgb0>; - }; - }; - }; - - vccq_panel: regulator-vccq-panel { - compatible = "regulator-fixed"; - regulator-name = "Panel VccQ"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - rsnd_sgtl5000: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&sgtl5000>; - }; - }; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; - status = "okay"; - - phy3: ethernet-phy@3 { - /* - * On some older versions of the platform (before R4.0) the phy address - * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. - */ - reg = <3>; - micrel,led-mode = <1>; - }; -}; - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&du { - pinctrl-0 = <&du0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&lcd_in>; - }; - }; - }; -}; - -&hscif1 { - pinctrl-0 = <&hscif1_pins>; - pinctrl-names = "default"; - - uart-has-rtscts; - status = "okay"; -}; - -&hsusb { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; -}; - -&i2c5 { - pinctrl-0 = <&i2c5_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - #sound-dai-cells = <0>; - reg = <0x0a>; - clocks = <&audio_clock>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - }; - - stmpe811@44 { - compatible = "st,stmpe811"; - reg = <0x44>; - interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; - /* ADC conversion time: 80 clocks */ - st,sample-time = <4>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - /* 8 sample average control */ - st,ave-ctrl = <3>; - /* 7 length fractional part in z */ - st,fraction-z = <7>; - /* - * 50 mA typical 80 mA max touchscreen drivers - * current limit value - */ - st,i-drive = <1>; - /* 1 ms panel driver settling time */ - st,settling = <3>; - /* 5 ms touch detect interrupt delay */ - st,touch-det-delay = <5>; - }; - }; -}; - -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; -}; - -&pfc { - avb_pins: avb { - groups = "avb_mdio", "avb_gmii"; - function = "avb"; - }; - - backlight_pins: backlight { - groups = "tpu_to3_c"; - function = "tpu"; - }; - - can0_pins: can0 { - groups = "can0_data"; - function = "can0"; - }; - - du0_pins: du0 { - groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out"; - function = "du0"; - }; - - hscif1_pins: hscif1 { - groups = "hscif1_data", "hscif1_ctrl"; - function = "hscif1"; - }; - - i2c5_pins: i2c5 { - groups = "i2c5_b"; - function = "i2c5"; - }; - - scif4_pins: scif4 { - groups = "scif4_data_b"; - function = "scif4"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sound_pins: sound { - groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; - function = "ssi"; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - usb1_pins: usb1 { - groups = "usb1"; - function = "usb1"; - }; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>; - pinctrl-names = "default"; - status = "okay"; - - /* Single DAI */ - - #sound-dai-cells = <0>; - - rcar_sound,dai { - dai0 { - playback = <&ssi3>, <&src3>, <&dvc0>; - capture = <&ssi4>, <&src4>, <&dvc1>; - }; - }; -}; - -&scif4 { - pinctrl-0 = <&scif4_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&ssi4 { - shared-pin; -}; - -&tpu { - pinctrl-0 = <&backlight_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; |