diff options
Diffstat (limited to 'dts/src/arm/r8a7790-lager.dts')
-rw-r--r-- | dts/src/arm/r8a7790-lager.dts | 945 |
1 files changed, 0 insertions, 945 deletions
diff --git a/dts/src/arm/r8a7790-lager.dts b/dts/src/arm/r8a7790-lager.dts deleted file mode 100644 index fa6d986b5d..0000000000 --- a/dts/src/arm/r8a7790-lager.dts +++ /dev/null @@ -1,945 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the Lager board - * - * Copyright (C) 2013-2014 Renesas Solutions Corp. - * Copyright (C) 2014 Cogent Embedded, Inc. - * Copyright (C) 2015-2016 Renesas Electronics Corporation - */ - -/* - * SSI-AK4643 - * - * SW1: 1: AK4643 - * 2: CN22 - * 3: ADV7511 - * - * This command is required when Playback/Capture - * - * amixer set "LINEOUT Mixer DACL" on - * amixer set "DVC Out" 100% - * amixer set "DVC In" 100% - * - * You can use Mute - * - * amixer set "DVC Out Mute" on - * amixer set "DVC In Mute" on - * - * You can use Volume Ramp - * - * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" - * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" - * amixer set "DVC Out Ramp" on - * aplay xxx.wav & - * amixer set "DVC Out" 80% // Volume Down - * amixer set "DVC Out" 100% // Volume Up - */ - -/dts-v1/; -#include "r8a7790.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Lager"; - compatible = "renesas,lager", "renesas,r8a7790"; - - aliases { - serial0 = &scif0; - serial1 = &scifa1; - i2c8 = &gpioi2c1; - i2c9 = &gpioi2c2; - i2c10 = &i2cexio0; - i2c11 = &i2cexio1; - i2c12 = &i2chdmi; - i2c13 = &i2cpwr; - mmc0 = &mmcif1; - mmc1 = &sdhi0; - mmc2 = &sdhi2; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0 0x40000000>; - }; - - memory@140000000 { - device_type = "memory"; - reg = <1 0x40000000 0 0xc0000000>; - }; - - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; - - keyboard { - compatible = "gpio-keys"; - - pinctrl-0 = <&keyboard_pins>; - pinctrl-names = "default"; - - one { - linux,code = <KEY_1>; - label = "SW2-1"; - wakeup-source; - debounce-interval = <20>; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - two { - linux,code = <KEY_2>; - label = "SW2-2"; - wakeup-source; - debounce-interval = <20>; - gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; - }; - three { - linux,code = <KEY_3>; - label = "SW2-3"; - wakeup-source; - debounce-interval = <20>; - gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; - }; - four { - linux,code = <KEY_4>; - label = "SW2-4"; - wakeup-source; - debounce-interval = <20>; - gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - led6 { - gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; - }; - led7 { - gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; - }; - led8 { - gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; - }; - }; - - fixedregulator3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vcc_sdhi2: regulator-vcc-sdhi2 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI2 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi2: regulator-vccq-sdhi2 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI2 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - audio_clock: audio_clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - rsnd_ak4643: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4643>; - clocks = <&audio_clock>; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; - }; - - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - hdmi-in { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&adv7612_in>; - }; - }; - }; - - cec_clock: cec-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - x2_clk: x2-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <148500000>; - }; - - x13_clk: x13-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <148500000>; - }; - - gpioi2c1: i2c-8 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "i2c-gpio"; - status = "disabled"; - scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <5>; - }; - - gpioi2c2: i2c-9 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "i2c-gpio"; - status = "disabled"; - scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <5>; - }; - - /* - * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. - * We use the I2C demuxer, so the desired IP core can be selected at runtime - * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). - * Note: For testing the I2C slave feature, it is convenient to connect this - * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and - * instantiate the slave device at runtime according to the documentation. - * You can then communicate with the slave via IIC3. - * - * IIC0/I2C0 does not appear to support fallback to GPIO. - */ - i2cexio0: i2c-10 { - compatible = "i2c-demux-pinctrl"; - i2c-parent = <&iic0>, <&i2c0>; - i2c-bus-name = "i2c-exio0"; - #address-cells = <1>; - #size-cells = <0>; - }; - - /* - * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA). - * This is similar to the arangement described for i2cexio0 (above) - * with a fallback to GPIO also provided. - */ - i2cexio1: i2c-11 { - compatible = "i2c-demux-pinctrl"; - i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>; - i2c-bus-name = "i2c-exio1"; - #address-cells = <1>; - #size-cells = <0>; - }; - - /* - * IIC2 and I2C2 may be switched using pinmux. - * A fallback to GPIO is also provided. - */ - i2chdmi: i2c-12 { - compatible = "i2c-demux-pinctrl"; - i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; - i2c-bus-name = "i2c-hdmi"; - #address-cells = <1>; - #size-cells = <0>; - - ak4643: codec@12 { - compatible = "asahi-kasei,ak4643"; - #sound-dai-cells = <0>; - reg = <0x12>; - }; - - composite-in@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep0>; - }; - }; - }; - - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; - clocks = <&cec_clock>; - clock-names = "cec"; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - hdmi-in@4c { - compatible = "adi,adv7612"; - reg = <0x4c>; - interrupt-parent = <&gpio1>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; - default-input = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7612_in: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - - port@2 { - reg = <2>; - adv7612_out: endpoint { - remote-endpoint = <&vin0ep2>; - }; - }; - }; - }; - }; - - /* - * IIC3 and I2C3 may be switched using pinmux. - * IIC3/I2C3 does not appear to support fallback to GPIO. - */ - i2cpwr: i2c-13 { - compatible = "i2c-demux-pinctrl"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_irq_pins>; - i2c-parent = <&iic3>, <&i2c3>; - i2c-bus-name = "i2c-pwr"; - #address-cells = <1>; - #size-cells = <0>; - - pmic@58 { - compatible = "dlg,da9063"; - reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9063-rtc"; - }; - - wdt { - compatible = "dlg,da9063-watchdog"; - }; - }; - - vdd_dvfs: regulator@68 { - compatible = "dlg,da9210"; - reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-boot-on; - regulator-always-on; - }; - }; -}; - -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&x13_clk>, <&x2_clk>; - clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; - }; - }; - }; -}; - -&lvds0 { - status = "okay"; - - ports { - port@1 { - endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; -}; - -&lvds1 { - ports { - port@1 { - lvds_connector: endpoint { - }; - }; - }; -}; - -&extal_clk { - clock-frequency = <20000000>; -}; - -&pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - - du_pins: du { - groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; - function = "du"; - }; - - scif0_pins: scif0 { - groups = "scif0_data"; - function = "scif0"; - }; - - scif_clk_pins: scif_clk { - groups = "scif_clk"; - function = "scif_clk"; - }; - - ether_pins: ether { - groups = "eth_link", "eth_mdio", "eth_rmii"; - function = "eth"; - }; - - phy1_pins: phy1 { - groups = "intc_irq0"; - function = "intc"; - }; - - scifa1_pins: scifa1 { - groups = "scifa1_data"; - function = "scifa1"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi2_pins: sd2 { - groups = "sdhi2_data4", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data4", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <1800>; - }; - - mmc1_pins: mmc1 { - groups = "mmc1_data8", "mmc1_ctrl"; - function = "mmc1"; - }; - - qspi_pins: qspi { - groups = "qspi_ctrl", "qspi_data4"; - function = "qspi"; - }; - - msiof1_pins: msiof1 { - groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", - "msiof1_tx"; - function = "msiof1"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - iic0_pins: iic0 { - groups = "iic0"; - function = "iic0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - iic1_pins: iic1 { - groups = "iic1"; - function = "iic1"; - }; - - i2c2_pins: i2c2 { - groups = "i2c2"; - function = "i2c2"; - }; - - iic2_pins: iic2 { - groups = "iic2"; - function = "iic2"; - }; - - i2c3_pins: i2c3 { - groups = "i2c3"; - function = "i2c3"; - }; - - iic3_pins: iic3 { - groups = "iic3"; - function = "iic3"; - }; - - pmic_irq_pins: pmicirq { - groups = "intc_irq2"; - function = "intc"; - }; - - hsusb_pins: hsusb { - groups = "usb0_ovc_vbus"; - function = "usb0"; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - usb1_pins: usb1 { - groups = "usb1"; - function = "usb1"; - }; - - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; - - vin0_pins: vin0 { - groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; - function = "vin0"; - }; - - vin1_pins: vin1 { - groups = "vin1_data8", "vin1_clk"; - function = "vin1"; - }; - - sound_pins: sound { - groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - function = "ssi"; - }; - - sound_clk_pins: sound_clk { - groups = "audio_clk_a"; - function = "audio_clk"; - }; - - keyboard_pins: keyboard { - pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28"; - bias-pull-up; - }; -}; - -ðer { - pinctrl-0 = <ðer_pins>, <&phy1_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy1>; - renesas,ether-link-active-low; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - micrel,led-mode = <1>; - reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; - }; -}; - -&cmt0 { - status = "okay"; -}; - -&mmcif1 { - pinctrl-0 = <&mmc1_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&qspi { - pinctrl-0 = <&qspi_pins>; - pinctrl-names = "default"; - - status = "okay"; - - flash: flash@0 { - compatible = "spansion,s25fl512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <30000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - spi-cpha; - spi-cpol; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "loader"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "user"; - reg = <0x00040000 0x00400000>; - read-only; - }; - partition@440000 { - label = "flash"; - reg = <0x00440000 0x03bc0000>; - }; - }; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scifa1 { - pinctrl-0 = <&scifa1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scif_clk { - clock-frequency = <14745600>; -}; - -&msiof1 { - pinctrl-0 = <&msiof1_pins>; - pinctrl-names = "default"; - - status = "okay"; - - pmic: pmic@0 { - compatible = "renesas,r2a11302ft"; - reg = <0>; - spi-max-frequency = <6000000>; - spi-cpol; - spi-cpha; - }; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhi2 { - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi2>; - vqmmc-supply = <&vccq_sdhi2>; - cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; - sd-uhs-sdr50; - status = "okay"; -}; - -&cpu0 { - cpu0-supply = <&vdd_dvfs>; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "i2c-exio0"; -}; - -&iic0 { - pinctrl-0 = <&iic0_pins>; - pinctrl-names = "i2c-exio0"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "i2c-exio1"; -}; - -&iic1 { - pinctrl-0 = <&iic1_pins>; - pinctrl-names = "i2c-exio1"; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "i2c-hdmi"; - - clock-frequency = <100000>; -}; - -&iic2 { - pinctrl-0 = <&iic2_pins>; - pinctrl-names = "i2c-hdmi"; - - clock-frequency = <100000>; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "i2c-pwr"; -}; - -&iic3 { - pinctrl-0 = <&iic3_pins>; - pinctrl-names = "i2c-pwr"; -}; - -&pci0 { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; -}; - -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; -}; - -&xhci { - status = "okay"; - pinctrl-0 = <&usb2_pins>; - pinctrl-names = "default"; -}; - -&pci2 { - status = "okay"; - pinctrl-0 = <&usb2_pins>; - pinctrl-names = "default"; -}; - -&hsusb { - status = "okay"; - pinctrl-0 = <&hsusb_pins>; - pinctrl-names = "default"; - renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; -}; - -&usbphy { - status = "okay"; -}; - -/* HDMI video input */ -&vin0 { - pinctrl-0 = <&vin0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - port { - vin0ep2: endpoint { - remote-endpoint = <&adv7612_out>; - bus-width = <24>; - hsync-active = <0>; - vsync-active = <0>; - pclk-sample = <1>; - data-active = <1>; - }; - }; -}; - -/* composite video input */ -&vin1 { - pinctrl-0 = <&vin1_pins>; - pinctrl-names = "default"; - - status = "okay"; - - port { - vin1ep0: endpoint { - remote-endpoint = <&adv7180>; - bus-width = <8>; - }; - }; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - status = "okay"; - - rcar_sound,dai { - dai0 { - playback = <&ssi0>, <&src2>, <&dvc0>; - capture = <&ssi1>, <&src3>, <&dvc1>; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&ssi1 { - shared-pin; -}; |