summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/r8a7790-lager.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/r8a7790-lager.dts')
-rw-r--r--dts/src/arm/r8a7790-lager.dts947
1 files changed, 0 insertions, 947 deletions
diff --git a/dts/src/arm/r8a7790-lager.dts b/dts/src/arm/r8a7790-lager.dts
deleted file mode 100644
index 57cd2fa722..0000000000
--- a/dts/src/arm/r8a7790-lager.dts
+++ /dev/null
@@ -1,947 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Lager board
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- * Copyright (C) 2015-2016 Renesas Electronics Corporation
- */
-
-/*
- * SSI-AK4643
- *
- * SW1: 1: AK4643
- * 2: CN22
- * 3: ADV7511
- *
- * This command is required when Playback/Capture
- *
- * amixer set "LINEOUT Mixer DACL" on
- * amixer set "DVC Out" 100%
- * amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- * amixer set "DVC Out Mute" on
- * amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
- * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- * amixer set "DVC Out Ramp" on
- * aplay xxx.wav &
- * amixer set "DVC Out" 80% // Volume Down
- * amixer set "DVC Out" 100% // Volume Up
- */
-
-/dts-v1/;
-#include "r8a7790.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Lager";
- compatible = "renesas,lager", "renesas,r8a7790";
-
- aliases {
- serial0 = &scif0;
- serial1 = &scifa1;
- i2c8 = &gpioi2c1;
- i2c9 = &gpioi2c2;
- i2c10 = &i2cexio0;
- i2c11 = &i2cexio1;
- i2c12 = &i2chdmi;
- i2c13 = &i2cpwr;
- mmc0 = &mmcif1;
- mmc1 = &sdhi0;
- mmc2 = &sdhi2;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
- stdout-path = "serial0:115200n8";
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- memory@140000000 {
- device_type = "memory";
- reg = <1 0x40000000 0 0xc0000000>;
- };
-
- lbsc {
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- keyboard {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&keyboard_pins>;
- pinctrl-names = "default";
-
- one {
- linux,code = <KEY_1>;
- label = "SW2-1";
- wakeup-source;
- debounce-interval = <20>;
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- two {
- linux,code = <KEY_2>;
- label = "SW2-2";
- wakeup-source;
- debounce-interval = <20>;
- gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
- };
- three {
- linux,code = <KEY_3>;
- label = "SW2-3";
- wakeup-source;
- debounce-interval = <20>;
- gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
- };
- four {
- linux,code = <KEY_4>;
- label = "SW2-4";
- wakeup-source;
- debounce-interval = <20>;
- gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led6 {
- gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
- };
- led7 {
- gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
- };
- led8 {
- gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
- };
- };
-
- fixedregulator3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- vcc_sdhi2: regulator-vcc-sdhi2 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI2 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi2: regulator-vccq-sdhi2 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI2 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- audio_clock: audio_clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <11289600>;
- };
-
- rsnd_ak4643: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4643>;
- clocks = <&audio_clock>;
- };
- };
-
- vga-encoder {
- compatible = "adi,adv7123";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
- };
- };
- };
-
- vga {
- compatible = "vga-connector";
-
- port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
- };
- };
- };
-
- hdmi-in {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&adv7612_in>;
- };
- };
- };
-
- cec_clock: cec-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <12000000>;
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_out: endpoint {
- remote-endpoint = <&adv7511_out>;
- };
- };
- };
-
- x2_clk: x2-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <148500000>;
- };
-
- x13_clk: x13-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <148500000>;
- };
-
- gpioi2c1: i2c-8 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "i2c-gpio";
- status = "disabled";
- scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <5>;
- };
-
- gpioi2c2: i2c-9 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "i2c-gpio";
- status = "disabled";
- scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <5>;
- };
-
- /*
- * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
- * We use the I2C demuxer, so the desired IP core can be selected at runtime
- * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
- * Note: For testing the I2C slave feature, it is convenient to connect this
- * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
- * instantiate the slave device at runtime according to the documentation.
- * You can then communicate with the slave via IIC3.
- *
- * IIC0/I2C0 does not appear to support fallback to GPIO.
- */
- i2cexio0: i2c-10 {
- compatible = "i2c-demux-pinctrl";
- i2c-parent = <&iic0>, <&i2c0>;
- i2c-bus-name = "i2c-exio0";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- /*
- * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
- * This is similar to the arangement described for i2cexio0 (above)
- * with a fallback to GPIO also provided.
- */
- i2cexio1: i2c-11 {
- compatible = "i2c-demux-pinctrl";
- i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
- i2c-bus-name = "i2c-exio1";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- /*
- * IIC2 and I2C2 may be switched using pinmux.
- * A fallback to GPIO is also provided.
- */
- i2chdmi: i2c-12 {
- compatible = "i2c-demux-pinctrl";
- i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
- i2c-bus-name = "i2c-hdmi";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ak4643: codec@12 {
- compatible = "asahi-kasei,ak4643";
- #sound-dai-cells = <0>;
- reg = <0x12>;
- };
-
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
-
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin1ep0>;
- };
- };
- };
-
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&cec_clock>;
- clock-names = "cec";
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
- };
- };
-
- hdmi-in@4c {
- compatible = "adi,adv7612";
- reg = <0x4c>;
- interrupt-parent = <&gpio1>;
- interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
- default-input = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7612_in: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
- };
-
- port@2 {
- reg = <2>;
- adv7612_out: endpoint {
- remote-endpoint = <&vin0ep2>;
- };
- };
- };
- };
- };
-
- /*
- * IIC3 and I2C3 may be switched using pinmux.
- * IIC3/I2C3 does not appear to support fallback to GPIO.
- */
- i2cpwr: i2c-13 {
- compatible = "i2c-demux-pinctrl";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_irq_pins>;
- i2c-parent = <&iic3>, <&i2c3>;
- i2c-bus-name = "i2c-pwr";
- #address-cells = <1>;
- #size-cells = <0>;
-
- pmic@58 {
- compatible = "dlg,da9063";
- reg = <0x58>;
- interrupt-parent = <&irqc0>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- wdt {
- compatible = "dlg,da9063-watchdog";
- };
- };
-
- vdd_dvfs: regulator@68 {
- compatible = "dlg,da9210";
- reg = <0x68>;
- interrupt-parent = <&irqc0>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
-};
-
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
- <&x13_clk>, <&x2_clk>;
- clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
-
- ports {
- port@0 {
- endpoint {
- remote-endpoint = <&adv7123_in>;
- };
- };
- };
-};
-
-&lvds0 {
- status = "okay";
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&adv7511_in>;
- };
- };
- };
-};
-
-&lvds1 {
- ports {
- port@1 {
- lvds_connector: endpoint {
- };
- };
- };
-};
-
-&extal_clk {
- clock-frequency = <20000000>;
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- du_pins: du {
- groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
- function = "du";
- };
-
- scif0_pins: scif0 {
- groups = "scif0_data";
- function = "scif0";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk";
- function = "scif_clk";
- };
-
- ether_pins: ether {
- groups = "eth_link", "eth_mdio", "eth_rmii";
- function = "eth";
- };
-
- phy1_pins: phy1 {
- groups = "intc_irq0";
- function = "intc";
- };
-
- scifa1_pins: scifa1 {
- groups = "scifa1_data";
- function = "scifa1";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data4", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data4", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- mmc1_pins: mmc1 {
- groups = "mmc1_data8", "mmc1_ctrl";
- function = "mmc1";
- };
-
- qspi_pins: qspi {
- groups = "qspi_ctrl", "qspi_data4";
- function = "qspi";
- };
-
- msiof1_pins: msiof1 {
- groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
- "msiof1_tx";
- function = "msiof1";
- };
-
- i2c0_pins: i2c0 {
- groups = "i2c0";
- function = "i2c0";
- };
-
- iic0_pins: iic0 {
- groups = "iic0";
- function = "iic0";
- };
-
- i2c1_pins: i2c1 {
- groups = "i2c1";
- function = "i2c1";
- };
-
- iic1_pins: iic1 {
- groups = "iic1";
- function = "iic1";
- };
-
- i2c2_pins: i2c2 {
- groups = "i2c2";
- function = "i2c2";
- };
-
- iic2_pins: iic2 {
- groups = "iic2";
- function = "iic2";
- };
-
- i2c3_pins: i2c3 {
- groups = "i2c3";
- function = "i2c3";
- };
-
- iic3_pins: iic3 {
- groups = "iic3";
- function = "iic3";
- };
-
- pmic_irq_pins: pmicirq {
- groups = "intc_irq2";
- function = "intc";
- };
-
- hsusb_pins: hsusb {
- groups = "usb0_ovc_vbus";
- function = "usb0";
- };
-
- usb0_pins: usb0 {
- groups = "usb0";
- function = "usb0";
- };
-
- usb1_pins: usb1 {
- groups = "usb1";
- function = "usb1";
- };
-
- usb2_pins: usb2 {
- groups = "usb2";
- function = "usb2";
- };
-
- vin0_pins: vin0 {
- groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
- function = "vin0";
- };
-
- vin1_pins: vin1 {
- groups = "vin1_data8", "vin1_clk";
- function = "vin1";
- };
-
- sound_pins: sound {
- groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
- function = "ssi";
- };
-
- sound_clk_pins: sound_clk {
- groups = "audio_clk_a";
- function = "audio_clk";
- };
-
- keyboard_pins: keyboard {
- pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28";
- bias-pull-up;
- };
-};
-
-&ether {
- pinctrl-0 = <&ether_pins>, <&phy1_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy1>;
- renesas,ether-link-active-low;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-id0022.1537",
- "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- interrupt-parent = <&irqc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- micrel,led-mode = <1>;
- reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
- };
-};
-
-&cmt0 {
- status = "okay";
-};
-
-&mmcif1 {
- pinctrl-0 = <&mmc1_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&fixedregulator3v3>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&sata1 {
- status = "okay";
-};
-
-&qspi {
- pinctrl-0 = <&qspi_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- flash: flash@0 {
- compatible = "spansion,s25fl512s", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <30000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- spi-cpha;
- spi-cpol;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "loader";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash";
- reg = <0x00440000 0x03bc0000>;
- };
- };
- };
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scifa1 {
- pinctrl-0 = <&scifa1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&msiof1 {
- pinctrl-0 = <&msiof1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- pmic: pmic@0 {
- compatible = "renesas,r2a11302ft";
- reg = <0>;
- spi-max-frequency = <6000000>;
- spi-cpol;
- spi-cpha;
- };
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdhi2 {
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi2>;
- vqmmc-supply = <&vccq_sdhi2>;
- cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_dvfs>;
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "i2c-exio0";
-};
-
-&iic0 {
- pinctrl-0 = <&iic0_pins>;
- pinctrl-names = "i2c-exio0";
-};
-
-&i2c1 {
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "i2c-exio1";
-};
-
-&iic1 {
- pinctrl-0 = <&iic1_pins>;
- pinctrl-names = "i2c-exio1";
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "i2c-hdmi";
-
- clock-frequency = <100000>;
-};
-
-&iic2 {
- pinctrl-0 = <&iic2_pins>;
- pinctrl-names = "i2c-hdmi";
-
- clock-frequency = <100000>;
-};
-
-&i2c3 {
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "i2c-pwr";
-};
-
-&iic3 {
- pinctrl-0 = <&iic3_pins>;
- pinctrl-names = "i2c-pwr";
-};
-
-&pci0 {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-};
-
-&pci1 {
- status = "okay";
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-};
-
-&xhci {
- status = "okay";
- pinctrl-0 = <&usb2_pins>;
- pinctrl-names = "default";
-};
-
-&pci2 {
- status = "okay";
- pinctrl-0 = <&usb2_pins>;
- pinctrl-names = "default";
-};
-
-&hsusb {
- status = "okay";
- pinctrl-0 = <&hsusb_pins>;
- pinctrl-names = "default";
- renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
- status = "okay";
-};
-
-/* HDMI video input */
-&vin0 {
- pinctrl-0 = <&vin0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- port {
- vin0ep2: endpoint {
- remote-endpoint = <&adv7612_out>;
- bus-width = <24>;
- hsync-active = <0>;
- vsync-active = <0>;
- pclk-sample = <1>;
- data-active = <1>;
- };
- };
-};
-
-/* composite video input */
-&vin1 {
- pinctrl-0 = <&vin1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- port {
- vin1ep0: endpoint {
- remote-endpoint = <&adv7180>;
- bus-width = <8>;
- };
- };
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
- status = "okay";
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0>, <&src2>, <&dvc0>;
- capture = <&ssi1>, <&src3>, <&dvc1>;
- };
- };
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&ssi1 {
- shared-pin;
-};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 21:04:12 +0000