summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/rk3288-evb.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/rk3288-evb.dtsi')
-rw-r--r--dts/src/arm/rk3288-evb.dtsi403
1 files changed, 0 insertions, 403 deletions
diff --git a/dts/src/arm/rk3288-evb.dtsi b/dts/src/arm/rk3288-evb.dtsi
deleted file mode 100644
index c4ca73b40d..0000000000
--- a/dts/src/arm/rk3288-evb.dtsi
+++ /dev/null
@@ -1,403 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3288.dtsi"
-
-/ {
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
-
- button-up {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- press-threshold-microvolt = <100000>;
- };
-
- button-down {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- press-threshold-microvolt = <300000>;
- };
-
- menu {
- label = "Menu";
- linux,code = <KEY_MENU>;
- press-threshold-microvolt = <640000>;
- };
-
- esc {
- label = "Esc";
- linux,code = <KEY_ESC>;
- press-threshold-microvolt = <1000000>;
- };
-
- home {
- label = "Home";
- linux,code = <KEY_HOME>;
- press-threshold-microvolt = <1300000>;
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <128>;
- enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_en>;
- pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- #clock-cells = <0>;
- };
-
- panel: panel {
- compatible = "lg,lp079qx1-sp0v";
- backlight = <&backlight>;
- enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&lcd_cs>;
-
- ports {
- panel_in: port {
- panel_in_edp: endpoint {
- remote-endpoint = <&edp_out_panel>;
- };
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- power {
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- wakeup-source;
- debounce-interval = <100>;
- };
- };
-
- /* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
- vcc_host: vcc-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc_host";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_phy: vcc-phy-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&eth_phy_pwr>;
- regulator-name = "vcc_phy";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- /*
- * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
- * vcc_io directly. Those boards won't be able to power cycle SD cards
- * but it shouldn't hurt to toggle this pin there anyway.
- */
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&edp {
- force-hpd;
- status = "okay";
-
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
-};
-
-&edp_phy {
- status = "okay";
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc_18>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp; /* wp not hooked up */
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
-};
-
-&gmac {
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&pinctrl {
- pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
- drive-strength = <8>;
- };
-
- pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- backlight {
- bl_en: bl-en {
- rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- lcd {
- lcd_cs: lcd-cs {
- rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdmmc {
- /*
- * Default drive strength isn't enough to achieve even
- * high-speed mode on EVB board so bump up to 8ma.
- */
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
- <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
- <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
- <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- eth_phy {
- eth_phy_pwr: eth-phy-pwr {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-20 01:52:08 +0000