diff options
Diffstat (limited to 'dts/src/arm/rv1108-elgin-r1.dts')
-rw-r--r-- | dts/src/arm/rv1108-elgin-r1.dts | 212 |
1 files changed, 0 insertions, 212 deletions
diff --git a/dts/src/arm/rv1108-elgin-r1.dts b/dts/src/arm/rv1108-elgin-r1.dts deleted file mode 100644 index 0c99a5934e..0000000000 --- a/dts/src/arm/rv1108-elgin-r1.dts +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/* - * Copyright (C) 2018 O.S. Systems Software LTDA. - */ - -/dts-v1/; - -#include "rv1108.dtsi" - -/ { - model = "Elgin RV1108 R1 board"; - compatible = "elgin,rv1108-r1", "rockchip,rv1108"; - - aliases { - mmc0 = &emmc; - }; - - memory@60000000 { - device_type = "memory"; - reg = <0x60000000 0x08000000>; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vsys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_core>; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - no-sd; - no-sdio; - non-removable; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; - status = "okay"; -}; - -&gmac { - clock_in_out = "output"; - pinctrl-names = "default"; - pinctrl-0 = <&rmii_pins>; - snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <275>; - i2c-scl-falling-time-ns = <16>; - status = "okay"; - - rk805: pmic@18 { - compatible = "rockchip,rk805"; - reg = <0x18>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; - rockchip,system-power-controller; - #clock-cells = <0>; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc5-supply = <&vdd_buck2>; - vcc6-supply = <&vdd_buck2>; - - regulators { - vdd_core: DCDC_REG1 { - regulator-name= "vdd_core"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_buck2: DCDC_REG2 { - regulator-name= "vdd_buck2"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name= "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-name= "vcc_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd_10: LDO_REG1 { - regulator-name= "vdd_10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_18: LDO_REG2 { - regulator-name= "vcc_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd10_pmu: LDO_REG3 { - regulator-name= "vdd10_pmu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - }; - }; -}; - -&spi { - pinctrl-names = "default"; - pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>; - status = "okay"; - - dh2228fv: dac@0 { - compatible = "rohm,dh2228fv"; - reg = <0>; - spi-max-frequency = <24000000>; - spi-cpha; - spi-cpol; - }; -}; - -&u2phy { - status = "okay"; - - u2phy_host: host-port { - status = "okay"; - }; - - u2phy_otg: otg-port { - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host_ehci { - status = "okay"; -}; - -&usb_host_ohci { - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; |