summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/s5pv210-aries.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/s5pv210-aries.dtsi')
-rw-r--r--dts/src/arm/s5pv210-aries.dtsi916
1 files changed, 0 insertions, 916 deletions
diff --git a/dts/src/arm/s5pv210-aries.dtsi b/dts/src/arm/s5pv210-aries.dtsi
deleted file mode 100644
index daa1067055..0000000000
--- a/dts/src/arm/s5pv210-aries.dtsi
+++ /dev/null
@@ -1,916 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's S5PV210 based Galaxy Aries board device tree source
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "s5pv210.dtsi"
-
-/ {
- compatible = "samsung,aries", "samsung,s5pv210";
-
- aliases: aliases {
- i2c4 = &i2c_sound;
- i2c5 = &i2c_accel;
- i2c6 = &i2c_pmic;
- i2c7 = &i2c_musb;
- i2c9 = &i2c_fuel;
- i2c10 = &i2c_touchkey;
- i2c11 = &i2c_prox;
- i2c12 = &i2c_magnetometer;
- };
-
- memory@30000000 {
- device_type = "memory";
- reg = <0x30000000 0x05000000>,
- <0x40000000 0x10000000>,
- <0x50000000 0x08000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mfc_left: region@43000000 {
- compatible = "shared-dma-pool";
- no-map;
- reg = <0x43000000 0x2000000>;
- };
-
- mfc_right: region@51000000 {
- compatible = "shared-dma-pool";
- no-map;
- reg = <0x51000000 0x2000000>;
- };
- };
-
- pmic_ap_clk: clock-0 {
- /* Workaround for missing clock on PMIC */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
-
- bt_codec: bt-sco {
- compatible = "linux,bt-sco";
- #sound-dai-cells = <0>;
- };
-
- vibrator_pwr: regulator-fixed-0 {
- compatible = "regulator-fixed";
- regulator-name = "vibrator-en";
- enable-active-high;
- gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_ena>;
- };
-
- touchkey_vdd: regulator-fixed-1 {
- compatible = "regulator-fixed";
- regulator-name = "VTOUCH_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&touchkey_vdd_ena>;
- };
-
- gp2a_vled: regulator-fixed-2 {
- compatible = "regulator-fixed";
- regulator-name = "VLED";
- enable-active-high;
- gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&gp2a_power>;
- };
-
- wifi_pwrseq: wifi-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_gpio_rst>;
- post-power-on-delay-ms = <500>;
- power-off-delay-us = <500>;
- };
-
- i2c_sound: i2c-gpio-0 {
- compatible = "i2c-gpio";
- sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sound_i2c_pins>;
-
- wm8994: audio-codec@1a {
- compatible = "wlf,wm8994";
- reg = <0x1a>;
-
- #sound-dai-cells = <0>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- clocks = <&clocks MOUT_CLKOUT>;
- clock-names = "MCLK1";
-
- AVDD2-supply = <&buck3_reg>;
- DBVDD-supply = <&buck3_reg>;
- CPVDD-supply = <&buck3_reg>;
- SPKVDD1-supply = <&buck3_reg>;
- SPKVDD2-supply = <&buck3_reg>;
-
- wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
- 0xa101 0x0100 0x8100 0x0100 0x0100
- 0x0100>;
-
- wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
- wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
-
- wlf,lineout1-se;
- wlf,lineout2-se;
-
- assigned-clocks = <&clocks MOUT_CLKOUT>;
- assigned-clock-rates = <0>;
- assigned-clock-parents = <&xusbxti>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&codec_ldo>;
- };
- };
-
- i2c_accel: i2c-gpio-1 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&accel_i2c_pins>;
-
- accelerometer@38 {
- compatible = "bosch,bma023";
- reg = <0x38>;
-
- vdd-supply = <&ldo9_reg>;
- vddio-supply = <&ldo9_reg>;
- };
- };
-
- i2c_pmic: i2c-gpio-2 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_i2c_pins>;
-
- pmic@66 {
- compatible = "maxim,max8998";
- reg = <0x66>;
- interrupt-parent = <&gph0>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-
- max8998,pmic-buck1-default-dvs-idx = <1>;
- max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
- <&gph0 4 GPIO_ACTIVE_HIGH>;
- max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
- <1050000>, <950000>;
-
- max8998,pmic-buck2-default-dvs-idx = <0>;
- max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
- max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
-
- regulators {
- ldo2_reg: LDO2 {
- regulator-name = "VALIVE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VUSB_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VADC_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VTF_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "LDO6";
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3600000>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VLCD_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VUSB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VCC_2.8V_PDA";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VPLL_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "CAM_AF_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "CAM_SENSOR_CORE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VGA_VDDIO_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VGA_DVDD_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "CAM_ISP_HOST_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VGA_AVDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VCC_3.0V_LCD";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vddarm";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1250000>;
- };
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vddint";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1100000>;
- };
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "VCC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "CAM_ISP_CORE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ap32khz_reg: EN32KHz-AP {
- regulator-name = "32KHz AP";
- regulator-always-on;
- };
-
- cp32khz_reg: EN32KHz-CP {
- regulator-name = "32KHz CP";
- };
-
- vichg_reg: ENVICHG {
- regulator-name = "VICHG";
- regulator-always-on;
- };
-
- safe1_sreg: ESAFEOUT1 {
- regulator-name = "SAFEOUT1";
- };
-
- safe2_sreg: ESAFEOUT2 {
- regulator-name = "SAFEOUT2";
- };
- };
- };
- };
-
- i2c_musb: i2c-gpio-3 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&musb_i2c_pins>;
-
- fsa9480: musb@25 {
- compatible = "fcs,fsa9480";
- reg = <0x25>;
- interrupt-parent = <&gph2>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&musb_irq>;
- };
- };
-
- i2c_fuel: i2c-gpio-4 {
- compatible = "i2c-gpio";
- sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&fg_i2c_pins>;
-
- fg: fuelgauge@36 {
- compatible = "maxim,max17040";
- reg = <0x36>;
- };
- };
-
- i2c_touchkey: i2c-gpio-5 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&touchkey_i2c_pins>;
-
- touchkey@20 {
- compatible = "cypress,aries-touchkey";
- reg = <0x20>;
- vdd-supply = <&touchkey_vdd>;
- vcc-supply = <&buck3_reg>;
- linux,keycodes = <KEY_MENU KEY_BACK
- KEY_HOMEPAGE KEY_SEARCH>;
- interrupt-parent = <&gpj4>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&touchkey_irq>;
- };
- };
-
- i2c_prox: i2c-gpio-6 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&prox_i2c_pins>;
-
- light-sensor@44 {
- compatible = "sharp,gp2ap002a00f";
- reg = <0x44>;
- interrupt-parent = <&gph0>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
- vdd-supply = <&gp2a_vled>;
- vio-supply = <&gp2a_vled>;
- io-channels = <&gp2a_shunt>;
- io-channel-names = "alsout";
- sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
- sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&gp2a_irq>;
- };
- };
-
- i2c_magnetometer: i2c-gpio-7 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&magnetometer_i2c_pins>;
-
- status = "disabled";
-
- /* Yamaha yas529 magnetometer, no mainline binding */
- };
-
- vibrator: pwm-vibrator {
- compatible = "pwm-vibrator";
- pwms = <&pwm 1 44642 0>;
- pwm-names = "enable";
- vcc-supply = <&vibrator_pwr>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm1_out>;
- };
-
- poweroff: syscon-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&pmu_syscon>;
- offset = <0x681c>; /* PS_HOLD_CONTROL */
- value = <0x5200>;
- };
-
- spi_lcd: spi-2 {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
- num-chipselects = <1>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_spi_pins>;
-
- panel@0 {
- compatible = "samsung,s6e63m0";
- reg = <0>;
- reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
- vdd3-supply = <&ldo7_reg>;
- vci-supply = <&ldo17_reg>;
- spi-max-frequency = <1200000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_rst>;
-
- port {
- lcd_ep: endpoint {
- remote-endpoint = <&fimd_ep>;
- };
- };
- };
- };
-};
-
-&adc {
- vdd-supply = <&ldo4_reg>;
-
- status = "okay";
-
- gp2a_shunt: current-sense-shunt {
- compatible = "current-sense-shunt";
- io-channels = <&adc 9>;
- shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
- #io-channel-cells = <0>;
- };
-};
-
-&fimd {
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_clk &lcd_data24>;
- status = "okay";
-
- samsung,invert-vden;
- samsung,invert-vclk;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@3 {
- reg = <3>;
- fimd_ep: endpoint {
- remote-endpoint = <&lcd_ep>;
- };
- };
-};
-
-&hsotg {
- vusb_a-supply = <&ldo8_reg>;
- vusb_d-supply = <&ldo3_reg>;
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&i2c2 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <400000>;
- samsung,i2c-slave-addr = <0x10>;
- status = "okay";
-
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
- interrupt-parent = <&gpj0>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&ts_irq>;
- reset-gpios = <&gpj1 3 GPIO_ACTIVE_LOW>;
- };
-};
-
-&i2s0 {
- dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
- status = "okay";
-};
-
-&mfc {
- memory-region = <&mfc_left>, <&mfc_right>;
-};
-
-&pinctrl0 {
- bt_reset: bt-reset-pins {
- samsung,pins = "gpb-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- wlan_bt_en: wlan-bt-en-pins {
- samsung,pins = "gpb-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-val = <1>;
- };
-
- codec_ldo: codec-ldo-pins {
- samsung,pins = "gpf3-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- };
-
- prox_i2c_pins: gp2a-i2c-pins {
- samsung,pins = "gpg0-2", "gpg2-2";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- wlan_gpio_rst: wlan-gpio-rst-pins {
- samsung,pins = "gpg1-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- };
-
- bt_wake: bt-wake-pins {
- samsung,pins = "gpg3-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- };
-
- gp2a_irq: gp2a-irq-pins {
- samsung,pins = "gph0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- pmic_dvs_pins: pmic-dvs-pins {
- samsung,pins = "gph0-3", "gph0-4", "gph0-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- samsung,pin-val = <0>;
- };
-
- pmic_irq: pmic-irq-pins {
- samsung,pins = "gph0-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- wifi_host_wake: wifi-host-wake-pins {
- samsung,pins = "gph2-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- bt_host_wake: bt-host-wake-pins {
- samsung,pins = "gph2-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- musb_irq: musq-irq-pins {
- samsung,pins = "gph2-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- tf_detect: tf-detect-pins {
- samsung,pins = "gph3-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- wifi_wake: wifi-wake-pins {
- samsung,pins = "gph3-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- };
-
- magnetometer_i2c_pins: yas529-i2c-pins-pins {
- samsung,pins = "gpj0-0", "gpj0-1";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- ts_irq: ts-irq-pins {
- samsung,pins = "gpj0-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- vibrator_ena: vibrator-ena-pins {
- samsung,pins = "gpj1-1";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- gp2a_power: gp2a-power-pins {
- samsung,pins = "gpj1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- touchkey_i2c_pins: touchkey-i2c-pins {
- samsung,pins = "gpj3-0", "gpj3-1";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- touchkey_vdd_ena: touchkey-vdd-ena-pins {
- samsung,pins = "gpj3-2";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- musb_i2c_pins: musb-i2c-pins {
- samsung,pins = "gpj3-4", "gpj3-5";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- accel_i2c_pins: accel-i2c-pins {
- samsung,pins = "gpj3-6", "gpj3-7";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- pmic_i2c_pins: pmic-i2c-pins-pins {
- samsung,pins = "gpj4-0", "gpj4-3";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- touchkey_irq: touchkey-irq-pins {
- samsung,pins = "gpj4-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- lcd_spi_pins: spi-lcd-pins {
- samsung,pins = "mp01-1", "mp04-1", "mp04-3";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- fg_i2c_pins: fg-i2c-pins {
- samsung,pins = "mp05-0", "mp05-1";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- sound_i2c_pins: sound-i2c-pins {
- samsung,pins = "mp05-2", "mp05-3";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- panel_rst: panel-rst-pins {
- samsung,pins = "mp05-5";
- samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-};
-
-&pwm {
- samsung,pwm-outputs = <1>;
-};
-
-&rtc {
- clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
- clock-names = "rtc", "rtc_src";
-};
-
-&sdhci1 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- max-frequency = <38400000>;
- pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
- pinctrl-names = "default";
- cap-sd-highspeed;
- cap-mmc-highspeed;
- keep-power-in-suspend;
-
- mmc-pwrseq = <&wifi_pwrseq>;
- non-removable;
- status = "okay";
-
- assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
- assigned-clock-rates = <0>, <50000000>;
- assigned-clock-parents = <&clocks MOUT_MPLL>;
-
- wlan@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&gph2>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- };
-};
-
-&sdhci2 {
- bus-width = <4>;
- cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&ldo5_reg>;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
- pinctrl-names = "default";
- status = "okay";
-
- assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
- assigned-clock-rates = <0>, <50000000>;
- assigned-clock-parents = <&clocks MOUT_MPLL>;
-};
-
-&uart0 {
- assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>;
- assigned-clock-rates = <0>, <111166667>;
- assigned-clock-parents = <&clocks MOUT_MPLL>;
-
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm4329-bt";
- max-speed = <3000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake
- &bt_reset &bt_wake>;
- shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
- device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&gph2>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wakeup";
- };
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
- vbus-supply = <&safe1_sreg>;
-};
-
-&xusbxti {
- clock-frequency = <24000000>;
-};