diff options
Diffstat (limited to 'dts/src/arm/sama5d2.dtsi')
| -rw-r--r-- | dts/src/arm/sama5d2.dtsi | 91 |
1 files changed, 85 insertions, 6 deletions
diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi index 3f750f6170..78996bdbd3 100644 --- a/dts/src/arm/sama5d2.dtsi +++ b/dts/src/arm/sama5d2.dtsi @@ -88,12 +88,6 @@ #clock-cells = <0>; clock-frequency = <0>; }; - - adc_op_clk: adc_op_clk{ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - }; }; ns_sram: sram@00200000 { @@ -263,6 +257,44 @@ cache-level = <2>; }; + nand0: nand@80000000 { + compatible = "atmel,sama5d2-nand"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = < /* EBI CS3 */ + 0x80000000 0x08000000 + /* SMC PMECC regs */ + 0xf8014070 0x00000490 + /* SMC PMECC Error Location regs */ + 0xf8014500 0x00000200 + /* ROM Galois tables */ + 0x00040000 0x00018000 + >; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + atmel,has-pmecc; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; + status = "disabled"; + + nfc@c0000000 { + compatible = "atmel,sama5d4-nfc"; + #address-cells = <1>; + #size-cells = <1>; + reg = < /* NFC Command Registers */ + 0xc0000000 0x08000000 + /* NFC HSMC regs */ + 0xf8014000 0x00000070 + /* NFC SRAM banks */ + 0x00100000 0x00100000 + >; + clocks = <&hsmc_clk>; + atmel,write-by-sram; + }; + }; + sdmmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; @@ -880,6 +912,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>; + dma-names = "tx", "rx"; clocks = <&uart0_clk>; clock-names = "usart"; status = "disabled"; @@ -889,6 +928,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>; + dma-names = "tx", "rx"; clocks = <&uart1_clk>; clock-names = "usart"; status = "disabled"; @@ -898,6 +944,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(40))>; + dma-names = "tx", "rx"; clocks = <&uart2_clk>; clock-names = "usart"; status = "disabled"; @@ -1016,6 +1069,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(41))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(42))>; + dma-names = "tx", "rx"; clocks = <&uart3_clk>; clock-names = "usart"; status = "disabled"; @@ -1024,6 +1084,13 @@ uart4: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(43))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(44))>; + dma-names = "tx", "rx"; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&uart4_clk>; clock-names = "usart"; @@ -1085,6 +1152,18 @@ status = "disabled"; }; + adc: adc@fc030000 { + compatible = "atmel,sama5d2-adc"; + reg = <0xfc030000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&adc_clk>; + clock-names = "adc_clk"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + status = "disabled"; + }; + pioA: pinctrl@fc038000 { compatible = "atmel,sama5d2-pinctrl"; reg = <0xfc038000 0x600>; |