diff options
Diffstat (limited to 'dts/src/arm/sama5d3.dtsi')
| -rw-r--r-- | dts/src/arm/sama5d3.dtsi | 537 |
1 files changed, 43 insertions, 494 deletions
diff --git a/dts/src/arm/sama5d3.dtsi b/dts/src/arm/sama5d3.dtsi index f11b018e91..0bb5b6fa07 100644 --- a/dts/src/arm/sama5d3.dtsi +++ b/dts/src/arm/sama5d3.dtsi @@ -108,7 +108,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "mci_clk"; }; @@ -123,7 +123,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "spi_clk"; status = "disabled"; }; @@ -137,7 +137,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "pclk"; status = "disabled"; }; @@ -148,7 +148,7 @@ #size-cells = <0>; reg = <0xf0010000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -163,10 +163,10 @@ pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; status = "disabled"; }; @@ -181,10 +181,10 @@ pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; status = "disabled"; }; @@ -197,7 +197,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "usart"; status = "disabled"; }; @@ -211,7 +211,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "usart"; status = "disabled"; }; @@ -222,7 +222,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; status = "disabled"; }; @@ -232,7 +232,7 @@ reg = <0xf002c000 0x300>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; status = "disabled"; }; @@ -242,7 +242,7 @@ interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi_data_0_7>; - clocks = <&isi_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; clock-names = "isi_clk"; status = "disabled"; port { @@ -267,7 +267,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "mci_clk"; }; @@ -282,7 +282,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "spi_clk"; status = "disabled"; }; @@ -296,7 +296,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; clock-names = "pclk"; status = "disabled"; }; @@ -323,7 +323,7 @@ &pinctrl_adc0_ad10 &pinctrl_adc0_ad11 >; - clocks = <&adc_clk>, + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0xfff>; @@ -367,10 +367,10 @@ pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; status = "disabled"; }; @@ -383,7 +383,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "usart"; status = "disabled"; }; @@ -397,7 +397,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; status = "disabled"; }; @@ -408,7 +408,7 @@ interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; dma-names = "tx"; - clocks = <&sha_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; clock-names = "sha_clk"; }; @@ -419,7 +419,7 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; dma-names = "tx", "rx"; - clocks = <&aes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; clock-names = "aes_clk"; }; @@ -430,7 +430,7 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; dma-names = "tx", "rx"; - clocks = <&tdes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; clock-names = "tdes_clk"; }; @@ -438,14 +438,14 @@ compatible = "atmel,at91sam9g45-trng"; reg = <0xf8040000 0x100>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; }; hsmc: hsmc@ffffc000 { compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; reg = <0xffffc000 0x1000>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; - clocks = <&hsmc_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -462,7 +462,7 @@ reg = <0xffffe600 0x200>; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "dma_clk"; }; @@ -471,14 +471,14 @@ reg = <0xffffe800 0x200>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 31>; clock-names = "dma_clk"; }; ramc0: ramc@ffffea00 { compatible = "atmel,sama5d3-ddramc"; reg = <0xffffea00 0x200>; - clocks = <&ddrck>, <&mpddr_clk>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "ddrck", "mpddr"; }; @@ -491,7 +491,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&dbgu_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; clock-names = "usart"; status = "disabled"; }; @@ -967,7 +967,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; }; pioB: gpio@fffff400 { @@ -978,7 +978,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; }; pioC: gpio@fffff600 { @@ -989,7 +989,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; }; pioD: gpio@fffff800 { @@ -1000,7 +1000,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; }; pioE: gpio@fffffa00 { @@ -1011,7 +1011,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; }; }; @@ -1019,353 +1019,9 @@ compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xfffffc00 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <50000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc &main_osc>; - }; - - plla: pllack { - compatible = "atmel,sama5d3-clk-pll"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <8000000 50000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <0 166000000>; - atmel,clk-divisors = <1 2 4 3>; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - }; - - smd: smdclk { - compatible = "atmel,at91sam9x5-clk-smd"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - smdck: smdck { - #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - }; - - periphck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - dbgu_clk: dbgu_clk { - #clock-cells = <0>; - reg = <2>; - }; - - hsmc_clk: hsmc_clk { - #clock-cells = <0>; - reg = <5>; - }; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <6>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <7>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <8>; - }; - - pioD_clk: pioD_clk { - #clock-cells = <0>; - reg = <9>; - }; - - pioE_clk: pioE_clk { - #clock-cells = <0>; - reg = <10>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <12>; - atmel,clk-output-range = <0 83000000>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <13>; - atmel,clk-output-range = <0 83000000>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <14>; - atmel,clk-output-range = <0 83000000>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <15>; - atmel,clk-output-range = <0 83000000>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <16>; - atmel,clk-output-range = <0 83000000>; - }; - - twi0_clk: twi0_clk { - reg = <18>; - #clock-cells = <0>; - atmel,clk-output-range = <0 41500000>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <19>; - atmel,clk-output-range = <0 41500000>; - }; - - twi2_clk: twi2_clk { - #clock-cells = <0>; - reg = <20>; - atmel,clk-output-range = <0 41500000>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <22>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <24>; - atmel,clk-output-range = <0 166000000>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <25>; - atmel,clk-output-range = <0 166000000>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <26>; - atmel,clk-output-range = <0 166000000>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <28>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <29>; - atmel,clk-output-range = <0 83000000>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <30>; - }; - - dma1_clk: dma1_clk { - #clock-cells = <0>; - reg = <31>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <32>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <33>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <37>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <38>; - atmel,clk-output-range = <0 83000000>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <39>; - atmel,clk-output-range = <0 83000000>; - }; - - sha_clk: sha_clk { - #clock-cells = <0>; - reg = <42>; - }; - - aes_clk: aes_clk { - #clock-cells = <0>; - reg = <43>; - }; - - tdes_clk: tdes_clk { - #clock-cells = <0>; - reg = <44>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <45>; - }; - - fuse_clk: fuse_clk { - #clock-cells = <0>; - reg = <48>; - }; - - mpddr_clk: mpddr_clk { - #clock-cells = <0>; - reg = <49>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; reset_controller: rstc@fffffe00 { @@ -1384,7 +1040,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; watchdog: watchdog@fffffe40 { @@ -1420,127 +1076,20 @@ }; usb0: gadget@500000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,sama5d3-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@7 { - reg = <7>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@8 { - reg = <8>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@9 { - reg = <9>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@10 { - reg = <10>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@11 { - reg = <11>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@12 { - reg = <12>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@13 { - reg = <13>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@14 { - reg = <14>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@15 { - reg = <15>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; }; usb1: ohci@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1549,7 +1098,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -1565,7 +1114,7 @@ 0x1 0x0 0x40000000 0x10000000 0x2 0x0 0x50000000 0x10000000 0x3 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { |