diff options
Diffstat (limited to 'dts/src/arm/socfpga.dtsi')
| -rw-r--r-- | dts/src/arm/socfpga.dtsi | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/dts/src/arm/socfpga.dtsi b/dts/src/arm/socfpga.dtsi index dcb8fba3d7..ec1966480f 100644 --- a/dts/src/arm/socfpga.dtsi +++ b/dts/src/arm/socfpga.dtsi @@ -84,6 +84,7 @@ #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; + resets = <&rst DMA_RESET>; }; }; @@ -100,6 +101,7 @@ reg = <0xffc00000 0x1000>; interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; clocks = <&can0_clk>; + resets = <&rst CAN0_RESET>; status = "disabled"; }; @@ -108,6 +110,7 @@ reg = <0xffc01000 0x1000>; interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>; clocks = <&can1_clk>; + resets = <&rst CAN1_RESET>; status = "disabled"; }; @@ -585,6 +588,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff708000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO0_RESET>; status = "disabled"; porta: gpio-controller@0 { @@ -605,6 +609,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff709000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO1_RESET>; status = "disabled"; portb: gpio-controller@0 { @@ -625,6 +630,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff70a000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO2_RESET>; status = "disabled"; portc: gpio-controller@0 { @@ -735,6 +741,7 @@ #size-cells = <0>; clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>; clock-names = "biu", "ciu"; + resets = <&rst SDMMC_RESET>; status = "disabled"; }; @@ -748,6 +755,7 @@ interrupts = <0x0 0x90 0x4>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>; status = "disabled"; }; @@ -767,6 +775,7 @@ cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; clocks = <&qspi_clk>; + resets = <&rst QSPI_RESET>; status = "disabled"; }; @@ -785,6 +794,7 @@ sdr: sdr@ffc25000 { compatible = "altr,sdr-ctl", "syscon"; reg = <0xffc25000 0x1000>; + resets = <&rst SDR_RESET>; }; sdramedac { @@ -801,6 +811,7 @@ interrupts = <0 154 4>; num-cs = <4>; clocks = <&spi_m_clk>; + resets = <&rst SPIM0_RESET>; status = "disabled"; }; @@ -812,6 +823,7 @@ interrupts = <0 155 4>; num-cs = <4>; clocks = <&spi_m_clk>; + resets = <&rst SPIM1_RESET>; status = "disabled"; }; @@ -878,6 +890,7 @@ dmas = <&pdma 28>, <&pdma 29>; dma-names = "tx", "rx"; + resets = <&rst UART0_RESET>; }; uart1: serial1@ffc03000 { @@ -890,6 +903,7 @@ dmas = <&pdma 30>, <&pdma 31>; dma-names = "tx", "rx"; + resets = <&rst UART1_RESET>; }; usbphy0: usbphy { @@ -929,6 +943,7 @@ reg = <0xffd02000 0x1000>; interrupts = <0 171 4>; clocks = <&osc1>; + resets = <&rst L4WD0_RESET>; status = "disabled"; }; @@ -937,6 +952,7 @@ reg = <0xffd03000 0x1000>; interrupts = <0 172 4>; clocks = <&osc1>; + resets = <&rst L4WD1_RESET>; status = "disabled"; }; }; |