1 files changed, 0 insertions, 183 deletions
diff --git a/dts/src/arm/socfpga_arria10_socdk.dtsi b/dts/src/arm/socfpga_arria10_socdk.dtsi
deleted file mode 100644
index 7edebe20e8..0000000000
--- a/dts/src/arm/socfpga_arria10_socdk.dtsi
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015 Altera Corporation <www.altera.com>
- */
-#include "socfpga_arria10.dtsi"
-
-/ {
-	model = "Altera SOCFPGA Arria 10";
-	compatible = "altr,socfpga-arria10", "altr,socfpga";
-
-	aliases {
-		ethernet0 = &gmac0;
-		serial0 = &uart1;
-	};
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	a10leds {
-		compatible = "gpio-leds";
-
-		a10sr_led0 {
-			label = "a10sr-led0";
-			gpios = <&a10sr_gpio 0 1>;
-		};
-
-		a10sr_led1 {
-			label = "a10sr-led1";
-			gpios = <&a10sr_gpio 1 1>;
-		};
-
-		a10sr_led2 {
-			label = "a10sr-led2";
-			gpios = <&a10sr_gpio 2 1>;
-		};
-
-		a10sr_led3 {
-			label = "a10sr-led3";
-			gpios = <&a10sr_gpio 3 1>;
-		};
-	};
-
-	ref_033v: 033-v-ref {
-		compatible = "regulator-fixed";
-		regulator-name = "0.33V";
-		regulator-min-microvolt = <330000>;
-		regulator-max-microvolt = <330000>;
-	};
-
-	soc {
-		clkmgr@ffd04000 {
-			clocks {
-				osc1 {
-					clock-frequency = <25000000>;
-				};
-			};
-		};
-	};
-};
-
-&gmac0 {
-	phy-mode = "rgmii";
-	phy-addr = <0xffffffff>; /* probe for phy addr */
-
-	/*
-	 * These skews assume the user's FPGA design is adding 600ps of delay
-	 * for TX_CLK on Arria 10.
-	 *
-	 * All skews are offset since hardware skew values for the ksz9031
-	 * range from a negative skew to a positive skew.
-	 * See the micrel-ksz90x1.txt Documentation file for details.
-	 */
-	txd0-skew-ps = <0>; /* -420ps */
-	txd1-skew-ps = <0>; /* -420ps */
-	txd2-skew-ps = <0>; /* -420ps */
-	txd3-skew-ps = <0>; /* -420ps */
-	rxd0-skew-ps = <420>; /* 0ps */
-	rxd1-skew-ps = <420>; /* 0ps */
-	rxd2-skew-ps = <420>; /* 0ps */
-	rxd3-skew-ps = <420>; /* 0ps */
-	txen-skew-ps = <0>; /* -420ps */
-	txc-skew-ps = <1860>; /* 960ps */
-	rxdv-skew-ps = <420>; /* 0ps */
-	rxc-skew-ps = <1680>; /* 780ps */
-	max-frame-size = <3800>;
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-
-	resource-manager@0 {
-		compatible = "altr,a10sr";
-		reg = <0>;
-		spi-max-frequency = <100000>;
-		/* low-level active IRQ at GPIO1_5 */
-		interrupt-parent = <&portb>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		a10sr_gpio: gpio-controller {
-			compatible = "altr,a10sr-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		a10sr_rst: reset-controller {
-			compatible = "altr,a10sr-reset";
-			#reset-cells = <1>;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	/*
-	 * adjust the falling times to decrease the i2c frequency to 50Khz
-	 * because the LCD module does not work at the standard 100Khz
-	 */
-	clock-frequency = <100000>;
-	i2c-sda-falling-time-ns = <6000>;
-	i2c-scl-falling-time-ns = <6000>;
-
-	adc@14 {
-		compatible = "lltc,ltc2497";
-		reg = <0x14>;
-		vref-supply = <&ref_033v>;
-	};
-
-	adc@16 {
-		compatible = "lltc,ltc2497";
-		reg = <0x16>;
-		vref-supply = <&ref_033v>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c32";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-
-	ltc@5c {
-		compatible = "ltc2977";
-		reg = <0x5c>;
-	};
-
-	temp@4c {
-		compatible = "maxim,max1619";
-		reg = <0x4c>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	disable-over-current;
-};
-
-&watchdog1 {
-	status = "okay";
-};