summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/socfpga_arria5_socdk.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/socfpga_arria5_socdk.dts')
-rw-r--r--dts/src/arm/socfpga_arria5_socdk.dts151
1 files changed, 0 insertions, 151 deletions
diff --git a/dts/src/arm/socfpga_arria5_socdk.dts b/dts/src/arm/socfpga_arria5_socdk.dts
deleted file mode 100644
index 90e676e701..0000000000
--- a/dts/src/arm/socfpga_arria5_socdk.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
- */
-
-#include "socfpga_arria5.dtsi"
-
-/ {
- model = "Altera SOCFPGA Arria V SoC Development Kit";
- compatible = "altr,socfpga-arria5", "altr,socfpga";
-
- chosen {
- bootargs = "earlyprintk";
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- name = "memory";
- device_type = "memory";
- reg = <0x0 0x40000000>; /* 1GB */
- };
-
- aliases {
- /* this allow the ethaddr uboot environmnet variable contents
- * to be added to the gmac1 device tree blob.
- */
- ethernet0 = &gmac1;
- };
-
- leds {
- compatible = "gpio-leds";
- hps0 {
- label = "hps_led0";
- gpios = <&porta 0 1>;
- };
-
- hps1 {
- label = "hps_led1";
- gpios = <&portb 11 1>;
- };
-
- hps2 {
- label = "hps_led2";
- gpios = <&porta 17 1>;
- };
-
- hps3 {
- label = "hps_led3";
- gpios = <&porta 18 1>;
- };
- };
-
- regulator_3_3v: 3-3-v-regulator {
- compatible = "regulator-fixed";
- regulator-name = "3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "rgmii";
-
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- txen-skew-ps = <0>;
- txc-skew-ps = <2600>;
- rxdv-skew-ps = <0>;
- rxc-skew-ps = <2000>;
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-
- /*
- * adjust the falling times to decrease the i2c frequency to 50Khz
- * because the LCD module does not work at the standard 100Khz
- */
- i2c-sda-falling-time-ns = <5000>;
- i2c-scl-falling-time-ns = <5000>;
-
- eeprom@51 {
- compatible = "atmel,24c32";
- reg = <0x51>;
- pagesize = <32>;
- };
-
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <&regulator_3_3v>;
- vqmmc-supply = <&regulator_3_3v>;
- status = "okay";
-};
-
-&qspi {
- status = "okay";
-
- flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "n25q256a";
- reg = <0>;
- spi-max-frequency = <100000000>;
-
- m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
- cdns,read-delay = <4>;
- cdns,tshsl-ns = <50>;
- cdns,tsd2d-ns = <50>;
- cdns,tchsh-ns = <4>;
- cdns,tslch-ns = <4>;
-
- partition@qspi-boot {
- /* 8MB for raw data. */
- label = "Flash 0 Raw Data";
- reg = <0x0 0x800000>;
- };
-
- partition@qspi-rootfs {
- /* 120MB for jffs2 data. */
- label = "Flash 0 jffs2 Filesystem";
- reg = <0x800000 0x7800000>;
- };
- };
-};
-
-&usb1 {
- status = "okay";
-};