diff options
Diffstat (limited to 'dts/src/arm/spear1340.dtsi')
| -rw-r--r-- | dts/src/arm/spear1340.dtsi | 167 |
1 files changed, 0 insertions, 167 deletions
diff --git a/dts/src/arm/spear1340.dtsi b/dts/src/arm/spear1340.dtsi deleted file mode 100644 index 13e1bdb3dd..0000000000 --- a/dts/src/arm/spear1340.dtsi +++ /dev/null @@ -1,167 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DTS file for all SPEAr1340 SoCs - * - * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - */ - -/include/ "spear13xx.dtsi" - -/ { - compatible = "st,spear1340"; - - ahb { - - spics: spics@e0700000{ - compatible = "st,spear-spics-gpio"; - reg = <0xe0700000 0x1000>; - st-spics,peripcfg-reg = <0x42c>; - st-spics,sw-enable-bit = <21>; - st-spics,cs-value-bit = <20>; - st-spics,cs-enable-mask = <3>; - st-spics,cs-enable-shift = <18>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - miphy0: miphy@eb800000 { - compatible = "st,spear1340-miphy"; - reg = <0xeb800000 0x4000>; - misc = <&misc>; - #phy-cells = <1>; - status = "disabled"; - }; - - ahci0: ahci@b1000000 { - compatible = "snps,spear-ahci"; - reg = <0xb1000000 0x10000>; - interrupts = <0 72 0x4>; - phys = <&miphy0 0>; - phy-names = "sata-phy"; - status = "disabled"; - }; - - pcie0: pcie@b1000000 { - compatible = "st,spear1340-pcie", "snps,dw-pcie"; - reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; - reg-names = "dbi", "config"; - interrupts = <0 68 0x4>; - num-lanes = <1>; - phys = <&miphy0 1>; - phy-names = "pcie-phy"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - status = "disabled"; - }; - - i2s-play@b2400000 { - compatible = "snps,designware-i2s"; - reg = <0xb2400000 0x10000>; - interrupt-names = "play_irq"; - interrupts = <0 98 0x4 - 0 99 0x4>; - play; - channel = <8>; - status = "disabled"; - }; - - i2s-rec@b2000000 { - compatible = "snps,designware-i2s"; - reg = <0xb2000000 0x10000>; - interrupt-names = "record_irq"; - interrupts = <0 100 0x4 - 0 101 0x4>; - record; - channel = <8>; - status = "disabled"; - }; - - pinmux: pinmux@e0700000 { - compatible = "st,spear1340-pinmux"; - reg = <0xe0700000 0x1000>; - #gpio-range-cells = <3>; - }; - - pwm: pwm@e0180000 { - compatible ="st,spear13xx-pwm"; - reg = <0xe0180000 0x1000>; - #pwm-cells = <2>; - status = "disabled"; - }; - - spdif-in@d0100000 { - compatible = "st,spdif-in"; - reg = < 0xd0100000 0x20000 - 0xd0110000 0x10000 >; - interrupts = <0 84 0x4>; - status = "disabled"; - }; - - spdif-out@d0000000 { - compatible = "st,spdif-out"; - reg = <0xd0000000 0x20000>; - interrupts = <0 85 0x4>; - status = "disabled"; - }; - - spi1: spi@5d400000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x5d400000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 99 0x4>; - status = "disabled"; - }; - - apb { - i2c1: i2c@b4000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xb4000000 0x1000>; - interrupts = <0 104 0x4>; - write-16bit; - status = "disabled"; - }; - - serial@b4100000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xb4100000 0x1000>; - interrupts = <0 105 0x4>; - status = "disabled"; - dmas = <&dwdma0 13 0 1>, - <&dwdma0 12 1 0>; - dma-names = "rx", "tx"; - }; - - thermal@e07008c4 { - st,thermal-flags = <0x2a00>; - }; - - gpiopinctrl: gpio@e2800000 { - compatible = "st,spear-plgpio"; - reg = <0xe2800000 0x1000>; - interrupts = <0 107 0x4>; - #interrupt-cells = <1>; - interrupt-controller; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 0 252>; - status = "disabled"; - - st-plgpio,ngpio = <250>; - st-plgpio,wdata-reg = <0x40>; - st-plgpio,dir-reg = <0x00>; - st-plgpio,ie-reg = <0x80>; - st-plgpio,rdata-reg = <0x20>; - st-plgpio,mis-reg = <0xa0>; - st-plgpio,eit-reg = <0x60>; - }; - }; - }; -}; |