diff options
Diffstat (limited to 'dts/src/arm/ste-snowball.dts')
-rw-r--r-- | dts/src/arm/ste-snowball.dts | 626 |
1 files changed, 0 insertions, 626 deletions
diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts deleted file mode 100644 index 934fc788fe..0000000000 --- a/dts/src/arm/ste-snowball.dts +++ /dev/null @@ -1,626 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2011 ST-Ericsson AB - */ - -/dts-v1/; -#include "ste-db9500.dtsi" -#include "ste-href-ab8500.dtsi" -#include "ste-href-family-pinctrl.dtsi" - -/ { - model = "Calao Systems Snowball platform with device tree"; - compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - en_3v3_reg: en_3v3 { - compatible = "regulator-fixed"; - regulator-name = "en-3v3-fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */ - gpio = <&ab8500_gpio 25 0x4>; - startup-delay-us = <5000>; - enable-active-high; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - button@1 { - debounce-interval = <50>; - wakeup-source; - linux,code = <2>; - label = "userpb"; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; - }; - button@2 { - debounce-interval = <50>; - wakeup-source; - linux,code = <3>; - label = "extkb1"; - gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; - }; - button@3 { - debounce-interval = <50>; - wakeup-source; - linux,code = <4>; - label = "extkb2"; - gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; - }; - button@4 { - debounce-interval = <50>; - wakeup-source; - linux,code = <5>; - label = "extkb3"; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - }; - button@5 { - debounce-interval = <50>; - wakeup-source; - linux,code = <6>; - label = "extkb4"; - gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&gpioled_snowball_mode>; - used-led { - label = "user_led"; - gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - }; - - soc { - /* Name the GPIO muxed rails on the Snowball board */ - gpio@8012e000 { - /* GPIOs 0 - 31 */ - gpio-line-names = "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", - "AP_GPIO31"; - }; - - gpio@8012e080 { - /* GPIOs 32 - 63 */ - gpio-line-names = "USR PB", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; - }; - - gpio@8000e000 { - /* GPIOs 64 - 95 */ - gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; - }; - - gpio@8000e100 { - /* GPIOs 128 - 159 */ - gpio-line-names = "", "", "", "", "", "", "", "", - "", "", "", "", "IRQ_LAN", "RSTn_LAN", - "USR_LED", "", "", "", "", "", "", - "", "", "AP_GPIO151", "AP_GPIO152", - "", "", "", "", "", "", ""; - }; - - gpio@8000e180 { - /* GPIOs 160 - 191 */ - gpio-line-names = "", "AP_GPIO161", "AP_GPIO162", - "ACCELEROMETER_INT1_RDY", - "ACCELEROMETER_INT2", "MAG_DRDY", - "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC", - "GYRO_INT", "UART_WAKE", "GBF_RESET", - "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; - }; - - gpio@8011e000 { - /* GPIOs 192 - 223 */ - gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "WLAN_RESETN", "WLAN_IRQ", "MMC_EN", - "MMC_CD", "", "", "", "", ""; - }; - - gpio@8011e080 { - /* GPIOs 224 - 255 */ - gpio-line-names = "", "", "", "", "SD_SEL", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; - }; - - msp0: msp@80123000 { - pinctrl-names = "default"; - pinctrl-0 = <&msp0txrxtfstck_a_1_default>; - status = "okay"; - }; - - msp1: msp@80124000 { - pinctrl-names = "default"; - pinctrl-0 = <&msp1txrx_a_1_default>; - status = "okay"; - }; - - msp2: msp@80117000 { - pinctrl-names = "default"; - pinctrl-0 = <&msp2_a_1_default>; - }; - - msp3: msp@80125000 { - status = "okay"; - }; - - external-bus@50000000 { - status = "okay"; - - ethernet@0 { - compatible = "smsc,lan9115"; - reg = <0 0x10000>; - interrupts = <12 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpio4>; - vdd33a-supply = <&en_3v3_reg>; - vddvario-supply = <&db8500_vape_reg>; - pinctrl-names = "default"; - pinctrl-0 = <ð_snowball_mode>; - - reg-shift = <1>; - reg-io-width = <2>; - smsc,force-internal-phy; - smsc,irq-active-high; - smsc,irq-push-pull; - - clocks = <&prcc_pclk 3 0>; - }; - }; - - /* ST6G3244ME level translator for 1.8/2.9 V */ - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - /* GPIO228 SD_SEL */ - gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; - /* GPIO217 MMC_EN */ - enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>; - enable-active-high; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - - states = <1800000 0x1 - 2900000 0x0>; - }; - - // External Micro SD slot - mmc@80126000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - /* All direction control is used */ - st,sig-dir-cmd; - st,sig-dir-dat0; - st,sig-dir-dat2; - st,sig-dir-dat31; - st,sig-pin-fbclk; - full-pwr-cycle; - vmmc-supply = <&ab8500_ldo_aux3_reg>; - vqmmc-supply = <&vmmci>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>; - pinctrl-1 = <&mc0_a_1_sleep>; - - /* GPIO218 MMC_CD */ - cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; - - status = "okay"; - }; - - // WLAN SDIO channel - mmc@80118000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mc1_a_1_default>; - pinctrl-1 = <&mc1_a_1_sleep>; - - status = "okay"; - }; - - // Unused PoP eMMC - register and put it to sleep by default */ - mmc@80005000 { - arm,primecell-periphid = <0x10480180>; - pinctrl-names = "default"; - pinctrl-0 = <&mc2_a_1_sleep>; - - status = "okay"; - }; - - // On-board eMMC - mmc@80114000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - cap-mmc-highspeed; - no-sdio; - no-sd; - vmmc-supply = <&ab8500_ldo_aux2_reg>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mc4_a_1_default>; - pinctrl-1 = <&mc4_a_1_sleep>; - - status = "okay"; - }; - - uart@80120000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&u0_a_1_default>; - pinctrl-1 = <&u0_a_1_sleep>; - status = "okay"; - }; - - /* This UART is unused and thus left disabled */ - uart@80121000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&u1rxtx_a_1_default>; - pinctrl-1 = <&u1rxtx_a_1_sleep>; - }; - - uart@80007000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&u2rxtx_c_1_default>; - pinctrl-1 = <&u2rxtx_c_1_sleep>; - status = "okay"; - }; - - i2c@80004000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c0_a_1_default>; - pinctrl-1 = <&i2c0_a_1_sleep>; - status = "okay"; - }; - - i2c@80122000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c1_b_2_default>; - pinctrl-1 = <&i2c1_b_2_sleep>; - status = "okay"; - }; - - i2c@80128000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c2_b_2_default>; - pinctrl-1 = <&i2c2_b_2_sleep>; - status = "okay"; - lsm303dlh@18 { - /* Accelerometer */ - compatible = "st,lsm303dlh-accel"; - st,drdy-int-pin = <1>; - reg = <0x18>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&accel_snowball_mode>; - interrupt-parent = <&gpio5>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */ - <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */ - }; - lsm303dlh@1e { - /* Magnetometer */ - compatible = "st,lsm303dlh-magn"; - reg = <0x1e>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&magneto_snowball_mode>; - interrupt-parent = <&gpio5>; - interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */ - }; - l3g4200d@68 { - /* Gyroscope */ - compatible = "st,l3g4200d-gyro"; - st,drdy-int-pin = <2>; - reg = <0x68>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&gyro_snowball_mode>; - interrupt-parent = <&gpio5>; - interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ - <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */ - }; - lsp001wm@5c { - /* Barometer/pressure sensor */ - compatible = "st,lps001wp-press"; - reg = <0x5c>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - }; - }; - - i2c@80110000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c3_c_2_default>; - pinctrl-1 = <&i2c3_c_2_sleep>; - status = "okay"; - }; - - spi@80002000 { - pinctrl-names = "default"; - pinctrl-0 = <&ssp0_snowball_mode>; - status = "okay"; - }; - - prcmu@80157000 { - ab8500 { - ab8500-gpiocontroller { - /* - * AB8500 GPIOs are numbered starting from 1, so the first - * index 0 is what in the datasheet is called "GPIO1", and - * the second is "GPIO2" and so forth. Confusingly, the - * Snowball schematic then names the "GPIO2" line "PM_GPIO1". - * while later naming "GPIO4" as "PM_GPIO4". - */ - gpio-line-names = "", /* AB8500 GPIO1 */ - "PM_GPIO1", /* AB8500 GPIO2 */ - "WLAN_CLK_REQ", /* AB8500 GPIO3 */ - "PM_GPIO4", /* AB8500 GPIO4 */ - "", "", "", "", "", "", "", "", "", "", "", - "EN_3V6", /* AB8500 GPIO16 */ - "", "", "", "" ,"", "", "", "", "", - "EN_3V3", /* AB8500 GPIO26 */ - "", "", "", "", "", "", "", "", "", "", "", "", "", - "PM_GPIO40", /* AB8500 GPIO40 */ - "PM_GPIO41", /* AB8500 GPIO41 */ - "PM_GPIO42"; /* AB8500 GPIO42 */ - }; - - ab8500_usb { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&usb_a_1_default>; - pinctrl-1 = <&usb_a_1_sleep>; - }; - - ext_regulators: ab8500-ext-regulators { - ab8500_ext1_reg: ab8500_ext1 { - regulator-name = "ab8500-ext-supply1"; - }; - - ab8500_ext2_reg_reg: ab8500_ext2 { - regulator-name = "ab8500-ext-supply2"; - }; - - ab8500_ext3_reg_reg: ab8500_ext3 { - regulator-name = "ab8500-ext-supply3"; - }; - }; - - ab8500-regulators { - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-name = "V-DISPLAY"; - }; - - ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { - regulator-name = "V-eMMC1"; - }; - - ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { - regulator-name = "V-MMC-SD"; - }; - - ab8500_ldo_intcore_reg: ab8500_ldo_intcore { - regulator-name = "V-INTCORE"; - }; - - ab8500_ldo_tvout_reg: ab8500_ldo_tvout { - regulator-name = "V-TVOUT"; - }; - - ab8500_ldo_audio_reg: ab8500_ldo_audio { - regulator-name = "V-AUD"; - }; - - ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { - regulator-name = "V-AMIC1"; - }; - - ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { - regulator-name = "V-AMIC2"; - }; - - ab8500_ldo_dmic_reg: ab8500_ldo_dmic { - regulator-name = "V-DMIC"; - }; - - ab8500_ldo_ana_reg: ab8500_ldo_ana { - regulator-name = "V-CSI/DSI"; - }; - }; - }; - }; - - pinctrl { - /* - * Set this up using hogs, as time goes by and as seems fit, these - * can be moved over to being controlled by respective device. - */ - pinctrl-names = "default"; - pinctrl-0 = <&gbf_snowball_mode>, - <&wlan_snowball_mode>; - - ethernet { - /* - * Mux in "SM" which is used for the - * SMSC911x Ethernet adapter - */ - eth_snowball_mode: eth_snowball { - snowball_mux { - function = "sm"; - groups = "sm_b_1"; - }; - /* LAN IRQ pin */ - snowball_cfg1 { - pins = "GPIO140_B11"; - ste,config = <&in_nopull>; - }; - /* LAN reset pin */ - snowball_cfg2 { - pins = "GPIO141_C12"; - ste,config = <&gpio_out_hi>; - }; - - }; - }; - sdi0 { - sdi0_default_mode: sdi0_default { - snowball_mux { - function = "mc0"; - /* Add the DAT31 pin even if it is not really used */ - groups = "mc0dat31dir_a_1"; - }; - snowball_cfg1 { - pins = "GPIO21_AB3"; /* DAT31DIR */ - ste,config = <&out_hi>; - }; - /* SD card detect GPIO pin, extend default state */ - snowball_cfg2 { - pins = "GPIO218_AH11"; - ste,config = <&gpio_in_pu>; - }; - /* VMMCI level-shifter enable */ - snowball_cfg3 { - pins = "GPIO217_AH12"; - ste,config = <&gpio_out_hi>; - }; - /* VMMCI level-shifter voltage select */ - snowball_cfg4 { - pins = "GPIO228_AJ6"; - ste,config = <&gpio_out_hi>; - }; - }; - }; - ssp0 { - ssp0_snowball_mode: ssp0_snowball_default { - snowball_mux { - function = "ssp0"; - groups = "ssp0_a_1"; - }; - snowball_cfg1 { - pins = "GPIO144_B13"; /* FRM */ - ste,config = <&gpio_out_hi>; - }; - snowball_cfg2 { - pins = "GPIO145_C13"; /* RXD */ - ste,config = <&in_pd>; - }; - snowball_cfg3 { - pins = - "GPIO146_D13", /* TXD */ - "GPIO143_D12"; /* CLK */ - ste,config = <&out_lo>; - }; - - }; - }; - gpio_led { - gpioled_snowball_mode: gpioled_default { - snowball_cfg1 { - pins = "GPIO142_C11"; - ste,config = <&gpio_out_hi>; - }; - - }; - }; - accelerometer { - accel_snowball_mode: accel_snowball { - /* Accelerometer lines */ - snowball_cfg1 { - pins = - "GPIO163_C20", /* ACCEL_IRQ1 */ - "GPIO164_B21"; /* ACCEL_IRQ2 */ - ste,config = <&gpio_in_pu>; - }; - }; - }; - gyro { - gyro_snowball_mode: gyro_snowball { - snowball_cfg1 { - pins = - "GPIO166_A22", /* DRDY */ - "GPIO169_D22"; /* INT */ - ste,config = <&gpio_in_pu>; - }; - }; - }; - magnetometer { - magneto_snowball_mode: magneto_snowball { - snowball_cfg1 { - pins = "GPIO165_C21"; /* MAG_DRDY */ - ste,config = <&gpio_in_pu>; - }; - }; - }; - gbf { - gbf_snowball_mode: gbf_snowball { - /* - * GBF (GPS, Bluetooth, FM-radio) interface, - * pull low to reset state - */ - snowball_cfg1 { - pins = "GPIO171_D23"; /* GBF_ENA_RESET */ - ste,config = <&gpio_out_lo>; - }; - }; - }; - wlan { - wlan_snowball_mode: wlan_snowball { - /* - * Activate this mode with the WLAN chip. - * These are plain GPIO pins used by WLAN - */ - snowball_cfg1 { - pins = - "GPIO161_D21", /* WLAN_PMU_EN */ - "GPIO215_AH13"; /* WLAN_ENA */ - ste,config = <&gpio_out_lo>; - }; - snowball_cfg2 { - pins = "GPIO216_AG12"; /* WLAN_IRQ */ - ste,config = <&gpio_in_pu>; - }; - }; - }; - }; - - mcde@a0350000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&lcd_default_mode>; - pinctrl-1 = <&lcd_sleep_mode>; - }; - }; -}; |