diff options
Diffstat (limited to 'dts/src/arm/ste-snowball.dts')
| -rw-r--r-- | dts/src/arm/ste-snowball.dts | 35 |
1 files changed, 28 insertions, 7 deletions
diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts index 9edadc3771..e80e421638 100644 --- a/dts/src/arm/ste-snowball.dts +++ b/dts/src/arm/ste-snowball.dts @@ -18,6 +18,13 @@ model = "Calao Systems Snowball platform with device tree"; compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -40,35 +47,35 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <2>; label = "userpb"; gpios = <&gpio1 0 0x4>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <3>; label = "extkb1"; gpios = <&gpio4 23 0x4>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <4>; label = "extkb2"; gpios = <&gpio4 24 0x4>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <5>; label = "extkb3"; gpios = <&gpio5 1 0x4>; }; button@5 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <6>; label = "extkb4"; gpios = <&gpio5 2 0x4>; @@ -223,11 +230,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { @@ -452,7 +459,21 @@ pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; - + /* SD card detect GPIO pin, extend default state */ + snowball_cfg2 { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + /* VMMCI level-shifter enable */ + snowball_cfg3 { + pins = "GPIO217_AH12"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + snowball_cfg4 { + pins = "GPIO228_AJ6"; + ste,config = <&gpio_out_hi>; + }; }; }; ssp0 { |