diff options
Diffstat (limited to 'dts/src/arm/ste-ux500-samsung-gavini.dts')
| -rw-r--r-- | dts/src/arm/ste-ux500-samsung-gavini.dts | 39 |
1 files changed, 19 insertions, 20 deletions
diff --git a/dts/src/arm/ste-ux500-samsung-gavini.dts b/dts/src/arm/ste-ux500-samsung-gavini.dts index 47bbf5ab26..1c0e5cfedd 100644 --- a/dts/src/arm/ste-ux500-samsung-gavini.dts +++ b/dts/src/arm/ste-ux500-samsung-gavini.dts @@ -232,19 +232,18 @@ #address-cells = <1>; #size-cells = <0>; - /* TODO: Memsic MMC328 magnetometer */ - magnetometer@30 { - compatible = "memsic,mmc328"; - reg = <0x30>; - /* TODO: if you have the schematic, check if both voltages come from AUX2 */ - /* VDA 1.8 V */ - vda-supply = <&ab8500_ldo_aux2_reg>; - /* VDD 1.8V */ - vdd-supply = <&ab8500_ldo_aux2_reg>; - /* GPIO204 */ + /* Yamaha YAS530 magnetometer */ + magnetometer@2e { + compatible = "yamaha,yas530"; + reg = <0x2e>; + /* VDD 3V */ + vdd-supply = <&ab8500_ldo_aux1_reg>; + /* IOVDD 1.8V */ + iovdd-supply = <&ab8500_ldo_aux2_reg>; + /* GPIO204 COMPASS_RST_N */ reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&mmc328_default>; + pinctrl-0 = <&yas530_default>; }; /* TODO: this should also be used by the NCP6914 Camera power management unit */ }; @@ -645,6 +644,15 @@ }; }; }; + /* Reset line for the Yamaha YAS530 magnetometer */ + yas530 { + yas530_default: yas530_janice { + janice_cfg1 { + pins = "GPIO204_AF23"; + ste,config = <&gpio_out_hi>; + }; + }; + }; /* Flash and torch */ flash { gpio_flash_default_mode: flash_default { @@ -747,15 +755,6 @@ }; }; }; - /* Reset line for the Memsic MMC328 magnetometer */ - mmc328 { - mmc328_default: mmc328_gavini { - gavini_cfg1 { - pins = "GPIO204_AF23"; - ste,config = <&gpio_out_hi>; - }; - }; - }; /* Interrupt line for Invensense MPU3050 gyroscope */ mpu3050 { mpu3050_default: mpu3050 { |