summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/ste-ux500-samsung-golden.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/ste-ux500-samsung-golden.dts')
-rw-r--r--dts/src/arm/ste-ux500-samsung-golden.dts699
1 files changed, 0 insertions, 699 deletions
diff --git a/dts/src/arm/ste-ux500-samsung-golden.dts b/dts/src/arm/ste-ux500-samsung-golden.dts
deleted file mode 100644
index ee6379ab68..0000000000
--- a/dts/src/arm/ste-ux500-samsung-golden.dts
+++ /dev/null
@@ -1,699 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "ste-db8500.dtsi"
-#include "ste-ab8505.dtsi"
-#include "ste-dbx5x0-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/*
- * Note: This device tree cannot be booted directly with the Samsung bootloader.
- * You need an intermediate, device-tree compatible bootloader
- * that locks the L2 cache. Otherwise the kernel will crash after decompression.
- *
- * There is a port of (mainline) U-Boot, see
- * https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500#U-Boot
- */
-/ {
- model = "Samsung Galaxy S III mini (GT-I8190)";
- compatible = "samsung,golden", "st-ericsson,u8500";
-
- chosen {
- stdout-path = &serial2;
- };
-
- i2c-gpio-0 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio2 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_gpio_0_default>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- touchkey@20 {
- compatible = "coreriver,tc360-touchkey";
- reg = <0x20>;
- vdd-supply = <&ab8500_ldo_aux4_reg>;
- vcc-supply = <&ab8500_ldo_aux6_reg>;
-
- interrupt-parent = <&gpio2>;
- interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&touchkey_default>;
- linux,keycodes = <KEY_MENU KEY_BACK>;
- };
- };
-
- i2c-gpio-1 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_gpio_1_default>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- magnetometer@c {
- compatible = "alps,hscdtd008a";
- reg = <0x0c>;
-
- avdd-supply = <&ab8500_ldo_aux1_reg>;
- dvdd-supply = <&ab8500_ldo_aux8_reg>;
- };
- };
-
- soc {
- /* External Micro SD card slot */
- mmc@80126000 {
- status = "okay";
-
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <4>;
-
- non-removable;
- /*
- * Unfortunately, there is no way to enable the UHS
- * modes due to a limitation of the SD level translator:
- * It will either translate to 2.9V or disconnect the
- * DATA lines, so switching to 1.8V signal voltage fails.
- */
- cap-sd-highspeed;
- cap-mmc-highspeed;
- st,sig-pin-fbclk;
- full-pwr-cycle;
-
- vmmc-supply = <&ab8500_ldo_aux3_reg>;
- vqmmc-supply = <&sd_level_translator>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mc0_a_2_default>;
- pinctrl-1 = <&mc0_a_2_sleep>;
- };
-
- /* WLAN SDIO */
- mmc@80118000 {
- status = "okay";
-
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
- bus-width = <4>;
-
- non-removable;
- cap-sd-highspeed;
-
- vmmc-supply = <&wl_reg_on>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mc1_a_2_default>;
- pinctrl-1 = <&mc1_a_2_sleep>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- wifi@1 {
- compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
- reg = <1>;
-
- /* GPIO216 (WLAN_HOST_WAKE) */
- interrupt-parent = <&gpio6>;
- interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
- interrupt-names = "host-wake";
-
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_default>;
- };
- };
-
- /* eMMC */
- mmc@80005000 {
- status = "okay";
-
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <8>;
-
- non-removable;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- no-sdio;
- no-sd;
-
- vmmc-supply = <&vmem_3v3>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mc2_a_1_default>;
- pinctrl-1 = <&mc2_a_1_sleep>;
- };
-
- /* BT UART */
- uart@80120000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&u0_a_1_default>;
- pinctrl-1 = <&u0_a_1_sleep>;
-
- bluetooth {
- /* BCM4334B0 actually */
- compatible = "brcm,bcm4330-bt";
- /* GPIO222 (BT_VREG_ON) */
- shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
- /* GPIO199 (BT_WAKE) */
- device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
- /* GPIO97 (BT_HOST_WAKE) */
- host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&bluetooth_default>;
- };
- };
-
- /* GPF UART */
- uart@80121000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
- pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
- };
-
- /* Debugging console UART */
- uart@80007000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&u2rxtx_c_1_default>;
- pinctrl-1 = <&u2rxtx_c_1_sleep>;
- };
-
- i2c@80004000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c0_a_1_default>;
- pinctrl-1 = <&i2c0_a_1_sleep>;
-
- proximity@44 {
- compatible = "sharp,gp2ap002s00f";
- reg = <0x44>;
-
- /* GPIO146 (PS_INT) */
- interrupt-parent = <&gpio4>;
- interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vio-supply = <&ab8500_ldo_aux8_reg>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&proximity_default>;
-
- sharp,proximity-far-hysteresis = <0x40>;
- sharp,proximity-close-hysteresis = <0x0f>;
- };
- };
-
- i2c@80128000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c2_b_2_default>;
- pinctrl-1 = <&i2c2_b_2_sleep>;
-
- imu@68 {
- compatible = "invensense,mpu6050";
- reg = <0x68>;
-
- /* GPIO206 (ACC_INT) */
- interrupt-parent = <&gpio6>;
- interrupts = <14 IRQ_TYPE_EDGE_RISING>;
-
- mount-matrix = "0", "1", "0",
- "-1", "0", "0",
- "0", "0", "1";
-
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&ab8500_ldo_aux8_reg>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&imu_default>;
- };
- };
-
- i2c@80110000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c3_c_2_default>;
- pinctrl-1 = <&i2c3_c_2_sleep>;
-
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
-
- /* GPIO218 (TSP_INT_1V8) */
- interrupt-parent = <&gpio6>;
- interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
-
- /* VDDA is "analog supply", 2.57-3.47 V */
- vdda-supply = <&ab8500_ldo_aux2_reg>;
- /* VDD is "digital supply" 1.71-3.47V */
- vdd-supply = <&ab8500_ldo_aux5_reg>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&tsp_default>;
- };
- };
-
- prcmu@80157000 {
- ab8505 {
- ab8500_usb {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&usb_a_1_default>;
- pinctrl-1 = <&usb_a_1_sleep>;
- };
-
- ab8505-regulators {
- ab8500_ldo_aux1 {
- regulator-name = "sensor_3v";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ab8500_ldo_aux2 {
- regulator-name = "vreg_tsp_a3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ab8500_ldo_aux3 {
- regulator-name = "vdd_tf_2v91";
- };
-
- ab8500_ldo_aux4 {
- regulator-name = "key_led_3.3v";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ab8500_ldo_aux5 {
- regulator-name = "vreg_tsp_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ab8500_ldo_aux6 {
- regulator-name = "touch_key_2.2v";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- };
-
- ab8500_ldo_aux8 {
- regulator-name = "sensor_1v8";
- };
- };
- };
- };
-
- mcde@a0350000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dsi_default_mode>;
-
- dsi@a0351000 {
- panel@0 {
- compatible = "samsung,s6e63m0";
- reg = <0>;
- max-brightness = <15>;
- vdd3-supply = <&panel_reg_3v0>;
- vci-supply = <&panel_reg_1v8>;
- reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
- /* ESD (electrostatic discharge) detection interrupt */
- interrupt-parent = <&gpio2>;
- interrupts = <18 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "esd";
- pinctrl-names = "default";
- pinctrl-0 = <&display_default_mode>;
- };
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_default>;
-
- label = "GPIO Buttons";
-
- volume-up {
- label = "Volume Up";
- /* GPIO67 (VOL_UP) */
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- };
-
- volume-down {
- label = "Volume Down";
- /* GPIO92 (VOL_DOWN) */
- gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
-
- home {
- label = "Home";
- /* GPIO91 (HOME_KEY) */
- gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_HOMEPAGE>;
- };
- };
-
- /* Richtek RT8515GQW Flash LED Driver IC */
- flash {
- compatible = "richtek,rt8515";
- /* GPIO 140 */
- enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
- /* GPIO 141 */
- ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
- /*
- * RFS is 16 kOhm and RTS is 100 kOhm giving
- * the flash max current 343mA and torch max
- * current 55 mA.
- */
- richtek,rfs-ohms = <16000>;
- richtek,rts-ohms = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_flash_default_mode>;
-
- led {
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- flash-max-timeout-us = <250000>;
- flash-max-microamp = <343750>;
- led-max-microamp = <55000>;
- };
- };
-
- vibrator {
- compatible = "gpio-vibrator";
- /* GPIO195 (MOT_EN) */
- enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_default>;
- };
-
- /* External LDO for eMMC */
- vmem_3v3: regulator-vmem {
- compatible = "regulator-fixed";
-
- regulator-name = "vmem_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
-
- startup-delay-us = <200>;
-
- /* GPIO223 (MEM_LDO_EN) */
- gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&mem_ldo_default>;
- };
-
- /* TI TXS0206-29 level translator for 2.9 V */
- sd_level_translator: regulator-sd-level-translator {
- compatible = "regulator-fixed";
-
- regulator-name = "sd-level-translator";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
-
- startup-delay-us = <200>;
-
- /* GPIO87 (TXS0206-29_EN) */
- gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sd_level_translator_default>;
- };
-
- /*
- * WL_REG_ON takes WLAN out of reset and enables the internal regulators.
- * The voltage specified here is only used to determine the OCR mask,
- * the BCM chip is actually connected directly to VBAT.
- */
- wl_reg_on: regulator-wl-reg-on {
- compatible = "regulator-fixed";
-
- regulator-name = "wl-reg-on";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- startup-delay-us = <100000>;
-
- /* GPIO215 (WLAN_EN) */
- gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_en_default>;
- };
-
- /* MIC5366 GPIO-controlled regulator */
- panel_reg_1v8: regulator-panel-1v8 {
- compatible = "regulator-fixed";
-
- regulator-name = "panel-fixed-supply";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- /* GPIO219 */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
-
- startup-delay-us = <200>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_reg_default_mode>;
- };
-
- /* MIC5366 GPIO-controlled regulator */
- panel_reg_3v0: regulator-panel-3v0 {
- compatible = "regulator-fixed";
-
- regulator-name = "panel-fixed-supply";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- /* GPIO219 */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
-
- startup-delay-us = <200>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_reg_default_mode>;
- };
-};
-
-&pinctrl {
- gpio-keys {
- gpio_keys_default: gpio_keys_default {
- golden_cfg1 {
- pins = "GPIO67", /* VOL_UP */
- "GPIO91", /* HOME_KEY */
- "GPIO92"; /* VOL_DOWN */
- ste,config = <&gpio_in_pu>;
- };
- };
- };
-
- i2c-gpio-0 {
- i2c_gpio_0_default: i2c_gpio_0 {
- golden_cfg1 {
- pins = "GPIO77", /* TOUCHKEY_SCL */
- "GPIO78"; /* TOUCHKEY_SDA */
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
-
- flash {
- gpio_flash_default_mode: flash_default {
- golden_cfg1 {
- pins = "GPIO140_B11", "GPIO141_C12";
- ste,config = <&gpio_out_lo>;
- };
- };
- };
-
- i2c-gpio-1 {
- i2c_gpio_1_default: i2c_gpio_1 {
- golden_cfg1 {
- pins = "GPIO151", /* COMP_SCL */
- "GPIO152"; /* COMP_SDA */
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
-
- touchkey {
- touchkey_default: touchkey_default {
- golden_cfg1 {
- pins = "GPIO79"; /* TOUCHKEY_INT */
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
-
- sdi0 {
- sd_level_translator_default: sd_level_translator_default {
- golden_cfg1 {
- pins = "GPIO87_B3"; /* TXS0206-29_EN */
- ste,config = <&gpio_out_lo>;
- };
- };
- };
-
- sdi2 {
- mem_ldo_default: mem_ldo_default {
- golden_cfg1 {
- pins = "GPIO223_AH9"; /* MEM_LDO_EN */
- ste,config = <&gpio_out_hi>;
- };
- };
- };
-
- mcde {
- dsi_default_mode: dsi_default {
- default_mux1 {
- /* Mux in VSI0 used for DSI TE */
- function = "lcd";
- groups =
- "lcdvsi0_a_1"; /* VSI0 for LCD */
- };
- default_cfg1 {
- pins =
- "GPIO68_E1"; /* VSI0 */
- ste,config = <&in_nopull>;
- };
- };
- };
-
- display {
- display_default_mode: display_default {
- golden_cfg1 {
- pins = "GPIO139_C9"; /* MIPI_DSI0_RESET_N */
- ste,config = <&gpio_out_lo>;
- };
- golden_cfg2 {
- pins = "GPIO82_C1"; /* LDI_ESD_DET */
- ste,config = <&gpio_in_pu>;
- };
- };
- panel_reg_default_mode: panel_reg_default {
- golden_cfg1 {
- pins = "GPIO219_AG10"; /* LCD_PWR_EN */
- ste,config = <&gpio_out_lo>;
- };
- };
- };
-
- proximity {
- proximity_default: proximity_default {
- golden_cfg1 {
- pins = "GPIO146_D13"; /* PS_INT */
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
-
- imu {
- imu_default: imu_default {
- golden_cfg1 {
- pins = "GPIO206_AG24"; /* ACC_INT */
- ste,config = <&gpio_in_pd>;
- };
- };
- };
-
- tsp {
- tsp_default: tsp_default {
- golden_cfg1 {
- pins = "GPIO218_AH11"; /* TSP_INT_1V8 */
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
-
- wlan {
- wlan_default: wlan_default {
- golden_cfg1 {
- pins = "GPIO216_AG12"; /* WLAN_HOST_WAKE */
- ste,config = <&gpio_in_pd>;
- };
- };
-
- wlan_en_default: wlan_en_default {
- golden_cfg1 {
- pins = "GPIO215_AH13"; /* WLAN_EN */
- ste,config = <&gpio_out_lo>;
- };
- };
- };
-
- bluetooth {
- bluetooth_default: bluetooth_default {
- golden_cfg1 {
- pins = "GPIO199_AH23", /* BT_WAKE */
- "GPIO222_AJ9"; /* BT_VREG_ON */
- ste,config = <&gpio_out_lo>;
- };
- golden_cfg2 {
- pins = "GPIO97_D9"; /* BT_HOST_WAKE */
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
-
- vibrator {
- vibrator_default: vibrator_default {
- golden_cfg1 {
- pins = "GPIO195_AG28"; /* MOT_EN */
- ste,config = <&gpio_out_lo>;
- };
- };
- };
-};
-
-&ab8505_gpio {
- /* Hog a few default settings */
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_default>;
-
- gpio {
- gpio_default: gpio_default {
- golden_mux {
- /* Change unused pins to GPIO mode */
- function = "gpio";
- groups = "gpio3_a_1", /* default: SysClkReq4 */
- "gpio14_a_1"; /* default: PWMOut1 */
- };
- golden_cfg1 {
- pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
- bias-disable;
- };
- };
- };
-};