summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/ste-ux500-samsung-golden.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/ste-ux500-samsung-golden.dts')
-rw-r--r--dts/src/arm/ste-ux500-samsung-golden.dts455
1 files changed, 455 insertions, 0 deletions
diff --git a/dts/src/arm/ste-ux500-samsung-golden.dts b/dts/src/arm/ste-ux500-samsung-golden.dts
new file mode 100644
index 0000000000..313f0ab168
--- /dev/null
+++ b/dts/src/arm/ste-ux500-samsung-golden.dts
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Note: This device tree cannot be booted directly with the Samsung bootloader.
+ * You need an intermediate, device-tree compatible bootloader
+ * that locks the L2 cache. Otherwise the kernel will crash after decompression.
+ *
+ * There is a port of (mainline) U-Boot, see
+ * https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500#U-Boot
+ */
+/ {
+ model = "Samsung Galaxy S III mini (GT-I8190)";
+ compatible = "samsung,golden", "st-ericsson,u8500";
+
+ chosen {
+ stdout-path = &serial2;
+ };
+
+ soc {
+ /* External Micro SD card slot */
+ sdi0_per1@80126000 {
+ status = "okay";
+
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+
+ non-removable;
+ /*
+ * Unfortunately, there is no way to enable the UHS
+ * modes due to a limitation of the SD level translator:
+ * It will either translate to 2.9V or disconnect the
+ * DATA lines, so switching to 1.8V signal voltage fails.
+ */
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ st,sig-pin-fbclk;
+ full-pwr-cycle;
+
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&sd_level_translator>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc0_a_2_default>;
+ pinctrl-1 = <&mc0_a_2_sleep>;
+ };
+
+ /* WLAN SDIO */
+ sdi1_per2@80118000 {
+ status = "okay";
+
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+
+ non-removable;
+ cap-sd-highspeed;
+
+ vmmc-supply = <&wl_reg_on>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc1_a_2_default>;
+ pinctrl-1 = <&mc1_a_2_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ /* GPIO216 (WLAN_HOST_WAKE) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default>;
+ };
+ };
+
+ /* eMMC */
+ sdi2_per3@80005000 {
+ status = "okay";
+
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <8>;
+
+ non-removable;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+
+ vmmc-supply = <&vmem_3v3>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
+ };
+
+ /* BT UART */
+ uart@80120000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ /* GPIO222 (BT_VREG_ON) */
+ shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ /* GPIO199 (BT_WAKE) */
+ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ /* GPIO97 (BT_HOST_WAKE) */
+ host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default>;
+ };
+ };
+
+ /* GPF UART */
+ uart@80121000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+ };
+
+ /* Debugging console UART */
+ uart@80007000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
+ };
+
+ i2c@80128000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
+
+ imu@68 {
+ compatible = "invensense,mpu6050";
+ reg = <0x68>;
+
+ /* GPIO206 (ACC_INT) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&ab8500_ldo_aux8_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&imu_default>;
+ };
+ };
+
+ i2c@80110000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+
+ /* GPIO218 (TSP_INT_1V8) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_default>;
+ };
+ };
+
+ prcmu@80157000 {
+ ab8505 {
+ ab8500_usb {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ ab8505-regulators {
+ ab8500_ldo_aux1 {
+ regulator-name = "sensor_3v";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ab8500_ldo_aux2 {
+ regulator-name = "vreg_tsp_a3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on; /* FIXME */
+ };
+
+ ab8500_ldo_aux3 {
+ regulator-name = "vdd_tf_2v91";
+ };
+
+ ab8500_ldo_aux4 {
+ regulator-name = "key_led_3.3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux5 {
+ regulator-name = "vreg_tsp_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on; /* FIXME */
+ };
+
+ ab8500_ldo_aux6 {
+ regulator-name = "touch_key_2.2v";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ ab8500_ldo_aux8 {
+ regulator-name = "sensor_1v8";
+ };
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ /* GPIO67 (VOL_UP) */
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ /* GPIO92 (VOL_DOWN) */
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ home {
+ label = "Home";
+ /* GPIO91 (HOME_KEY) */
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ };
+ };
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ /* GPIO195 (MOT_EN) */
+ enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_default>;
+ };
+
+ /* External LDO for eMMC */
+ vmem_3v3: regulator-vmem {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vmem_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ startup-delay-us = <200>;
+
+ /* GPIO223 (MEM_LDO_EN) */
+ gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mem_ldo_default>;
+ };
+
+ /* TI TXS0206-29 level translator for 2.9 V */
+ sd_level_translator: regulator-sd-level-translator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "sd-level-translator";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+
+ startup-delay-us = <200>;
+
+ /* GPIO87 (TXS0206-29_EN) */
+ gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_level_translator_default>;
+ };
+
+ /*
+ * WL_REG_ON takes WLAN out of reset and enables the internal regulators.
+ * The voltage specified here is only used to determine the OCR mask,
+ * the BCM chip is actually connected directly to VBAT.
+ */
+ wl_reg_on: regulator-wl-reg-on {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg-on";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ startup-delay-us = <100000>;
+
+ /* GPIO215 (WLAN_EN) */
+ gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en_default>;
+ };
+};
+
+&pinctrl {
+ gpio-keys {
+ gpio_keys_default: gpio_keys_default {
+ golden_cfg1 {
+ pins = "GPIO67", /* VOL_UP */
+ "GPIO91", /* HOME_KEY */
+ "GPIO92"; /* VOL_DOWN */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+
+ sdi0 {
+ sd_level_translator_default: sd_level_translator_default {
+ golden_cfg1 {
+ pins = "GPIO87_B3"; /* TXS0206-29_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+
+ sdi2 {
+ mem_ldo_default: mem_ldo_default {
+ golden_cfg1 {
+ pins = "GPIO223_AH9"; /* MEM_LDO_EN */
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+
+ imu {
+ imu_default: imu_default {
+ golden_cfg1 {
+ pins = "GPIO206_AG24"; /* ACC_INT */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+
+ tsp {
+ tsp_default: tsp_default {
+ golden_cfg1 {
+ pins = "GPIO218_AH11"; /* TSP_INT_1V8 */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+
+ wlan {
+ wlan_default: wlan_default {
+ golden_cfg1 {
+ pins = "GPIO216_AG12"; /* WLAN_HOST_WAKE */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+
+ wlan_en_default: wlan_en_default {
+ golden_cfg1 {
+ pins = "GPIO215_AH13"; /* WLAN_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+
+ bluetooth {
+ bluetooth_default: bluetooth_default {
+ golden_cfg1 {
+ pins = "GPIO199_AH23", /* BT_WAKE */
+ "GPIO222_AJ9"; /* BT_VREG_ON */
+ ste,config = <&gpio_out_lo>;
+ };
+ golden_cfg2 {
+ pins = "GPIO97_D9"; /* BT_HOST_WAKE */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+
+ vibrator {
+ vibrator_default: vibrator_default {
+ golden_cfg1 {
+ pins = "GPIO195_AG28"; /* MOT_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+};
+
+&ab8505_gpio {
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_default>;
+
+ gpio {
+ gpio_default: gpio_default {
+ golden_mux {
+ /* Change unused pins to GPIO mode */
+ function = "gpio";
+ groups = "gpio3_a_1", /* default: SysClkReq4 */
+ "gpio14_a_1"; /* default: PWMOut1 */
+ };
+ golden_cfg1 {
+ pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+ bias-disable;
+ };
+ };
+ };
+};