summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/ste-ux500-samsung-kyle.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/ste-ux500-samsung-kyle.dts')
-rw-r--r--dts/src/arm/ste-ux500-samsung-kyle.dts690
1 files changed, 0 insertions, 690 deletions
diff --git a/dts/src/arm/ste-ux500-samsung-kyle.dts b/dts/src/arm/ste-ux500-samsung-kyle.dts
deleted file mode 100644
index c57676faf1..0000000000
--- a/dts/src/arm/ste-ux500-samsung-kyle.dts
+++ /dev/null
@@ -1,690 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Devicetree for the Samsung Galaxy Amp SGH-I407 also known as Kyle.
- *
- * The code also refers to "Kyle AT&T" reflecting that this mobile phone
- * was customized for the AT&T subsidiary Aio Wireless (All In One) and
- * offered by the company in 2013.
- */
-
-/dts-v1/;
-#include "ste-db8500.dtsi"
-#include "ste-ab8505.dtsi"
-#include "ste-dbx5x0-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "Samsung Galaxy Amp (SGH-I407)";
- compatible = "samsung,kyle", "st-ericsson,u8500";
-
- chosen {
- stdout-path = &serial2;
- };
-
- battery: battery {
- compatible = "samsung,eb425161la";
- };
-
- thermal-zones {
- battery-thermal {
- /* This zone will be polled by the battery temperature code */
- polling-delay = <0>;
- polling-delay-passive = <0>;
- thermal-sensors = <&bat_therm>;
- };
- };
-
- bat_therm: thermistor {
- compatible = "samsung,1404-001221";
- io-channels = <&gpadc 0x02>; /* BatTemp */
- pullup-uv = <1800000>;
- pullup-ohm = <230000>;
- pulldown-ohm = <0>;
- #thermal-sensor-cells = <0>;
- };
-
- /* TI TXS0206 level translator for 2.9 V */
- sd_level_translator: regulator-gpio {
- compatible = "regulator-fixed";
-
- /* GPIO87 EN */
- gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- regulator-name = "sd-level-translator";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- regulator-type = "voltage";
-
- startup-delay-us = <200>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sd_level_translator_default>;
- };
-
- /* External LDO MIC5366-3.3YMT for eMMC */
- ldo_3v3_reg: regulator-gpio-ldo-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "en-3v3-fixed-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
- startup-delay-us = <5000>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_ldo_en_default_mode>;
- };
-
- /*
- * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
- * LCD_PWR_EN controls both a 3.0V and 1.8V output.
- */
- lcd_3v0_reg: regulator-gpio-lcd-3v0 {
- compatible = "regulator-fixed";
- /* Supplied in turn by VBAT */
- regulator-name = "VREG_LCD_3V0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- /* GPIO219 controls this regulator */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pwr_en_default_mode>;
- };
- lcd_1v8_reg: regulator-gpio-lcd-1v8 {
- compatible = "regulator-fixed";
- /* Supplied in turn by VBAT */
- regulator-name = "VREG_LCD_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- /* GPIO219 controls this regulator too */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pwr_en_default_mode>;
- };
-
- wlan_en: regulator-gpio-wlan-en {
- compatible = "regulator-fixed";
- regulator-name = "wl-reg-on";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- startup-delay-us = <200000>;
- /* GPIO215 WLAN_EN */
- gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_en_default_mode>;
- };
-
- vibrator {
- compatible = "gpio-vibrator";
- enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_default>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_default_mode>;
-
- button-home {
- linux,code = <KEY_HOME>;
- label = "HOME";
- /* GPIO91 */
- gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
- };
- button-volup {
- linux,code = <KEY_VOLUMEUP>;
- label = "VOL+";
- /* GPIO67 */
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- };
- button-voldown {
- linux,code = <KEY_VOLUMEDOWN>;
- label = "VOL-";
- /* GPIO92 */
- gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
- };
- };
-
- ktd253: backlight {
- compatible = "kinetic,ktd253";
- /* GPIO 69 */
- enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
- /* Default to 13/32 brightness */
- default-brightness = <13>;
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_backlight_default_mode>;
- };
-
- /* Richtek RT8515GQW Flash LED Driver IC */
- flash {
- compatible = "richtek,rt8515";
- /* GPIO 140 */
- enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
- /* GPIO 141 */
- ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
- /*
- * RFS is 16 kOhm and RTS is 100 kOhm giving
- * the flash max current 343mA and torch max
- * current 55 mA.
- */
- richtek,rfs-ohms = <16000>;
- richtek,rts-ohms = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_flash_default_mode>;
-
- led {
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- flash-max-timeout-us = <250000>;
- flash-max-microamp = <343750>;
- led-max-microamp = <55000>;
- };
- };
-
- i2c-gpio-0 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_gpio_0_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- /* TODO: this should be used by the NCP6914 Camera power management unit */
- };
-
- i2c-gpio-1 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_gpio_1_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- magnetometer@c {
- compatible = "alps,hscdtd008a";
- reg = <0x0c>;
- avdd-supply = <&ab8500_ldo_aux1_reg>;
- dvdd-supply = <&ab8500_ldo_aux6_reg>;
- };
- };
-
- soc {
- // External Micro SD slot
- mmc@80126000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <4>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- st,sig-pin-fbclk;
- full-pwr-cycle;
- vmmc-supply = <&ab8500_ldo_aux3_reg>;
- vqmmc-supply = <&sd_level_translator>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mc0_a_1_default>;
- pinctrl-1 = <&mc0_a_1_sleep>;
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
- status = "okay";
- };
-
- // WLAN SDIO channel
- mmc@80118000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
- bus-width = <4>;
- non-removable;
- cap-sd-highspeed;
- vmmc-supply = <&wlan_en>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mc1_a_2_default>;
- pinctrl-1 = <&mc1_a_2_sleep>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- wifi@1 {
- compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
- reg = <1>;
- /* GPIO216 WL_HOST_WAKE */
- interrupt-parent = <&gpio6>;
- interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
- interrupt-names = "host-wake";
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_default_mode>;
- };
- };
-
- /*
- * eMMC seems to be mostly Samsung KLM4G1YE4C "4YMD1R"
- */
- mmc@80005000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <8>;
- non-removable;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- no-sdio;
- no-sd;
- /* From datasheet page 26 figure 9: 300 ms set-up time for 4GB */
- post-power-on-delay-ms = <300>;
- vmmc-supply = <&ldo_3v3_reg>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mc2_a_1_default>;
- pinctrl-1 = <&mc2_a_1_sleep>;
-
- status = "okay";
- };
-
- /* GBF (Bluetooth) UART */
- uart@80120000 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&u0_a_1_default>;
- pinctrl-1 = <&u0_a_1_sleep>;
- status = "okay";
-
- bluetooth {
- /* BCM4334B0 actually */
- compatible = "brcm,bcm4330-bt";
- shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
- device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bluetooth_default_mode>;
- };
- };
-
- /* GPF UART */
- uart@80121000 {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
- pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
- };
-
- /* Debugging console UART connected to AB8505 USB */
- uart@80007000 {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&u2rxtx_c_1_default>;
- pinctrl-1 = <&u2rxtx_c_1_sleep>;
- };
-
- prcmu@80157000 {
- ab8505 {
- phy {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&usb_a_1_default>;
- pinctrl-1 = <&usb_a_1_sleep>;
- };
-
- ab8500_fg {
- line-impedance-micro-ohms = <36000>;
- };
-
- regulator {
- ab8500_ldo_aux1 {
- /* Used for VDD for sensors */
- regulator-name = "AUX1";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ab8500_ldo_aux2 {
- /* Supplies the MMS touchscreen only with 3.3V */
- regulator-name = "AUX2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ab8500_ldo_aux3 {
- /* Used for voltage for external MMC/SD card */
- regulator-name = "AUX3";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ab8500_ldo_aux4 {
- regulator-name = "AUX4";
- /* Hammer to 3.3V for the touchscreen */
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ab8500_ldo_aux5 {
- regulator-name = "AUX5";
- /* 1.8V for the touchscreen */
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ab8500_ldo_aux6 {
- regulator-name = "AUX6";
- /* Used by sensors for 1.8 V in R0.1+ */
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ab8500_ldo_aux8 {
- /* Unused */
- regulator-name = "AUX8";
- };
- };
- };
- };
-
- /* I2C0 */
- i2c@80004000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c0_a_1_default>;
- pinctrl-1 = <&i2c0_a_1_sleep>;
-
- proximity@44 {
- compatible = "sharp,gp2ap002s00f";
- clock-frequency = <400000>;
- reg = <0x44>;
-
- interrupt-parent = <&gpio4>;
- interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vio-supply = <&ab8500_ldo_aux6_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&gp2ap002_kyle_default>;
- sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
- sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
- };
- };
-
- /* I2C2 */
- i2c@80128000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c2_b_2_default>;
- pinctrl-1 = <&i2c2_b_2_sleep>;
-
- accel@18 {
- compatible = "bosch,bma254";
- clock-frequency = <400000>;
- reg = <0x18>;
-
- mount-matrix = "-1", "0", "0",
- "0", "-1", "0",
- "0", "0", "-1";
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&ab8500_ldo_aux6_reg>;
- };
- };
-
- /* I2C3 */
- i2c@80110000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c3_c_2_default>;
- pinctrl-1 = <&i2c3_c_2_sleep>;
-
- /* Melfas MMS134S touchscreen */
- touchscreen@48 {
- compatible = "melfas,mms134s";
- reg = <0x48>;
- /* GPIO218 for IRQ */
- interrupt-parent = <&gpio6>;
- interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
- /* AVDD is "analog supply", 2.57-3.47 V */
- avdd-supply = <&ab8500_ldo_aux2_reg>;
- /* VDD is "digital supply" 1.71-3.47V */
- vdd-supply = <&ab8500_ldo_aux5_reg>;
-
- touchscreen-size-x = <480>;
- touchscreen-size-y = <800>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&mms134s_kyle_default>;
- };
- };
-
- mcde@a0350000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dsi_default_mode>;
-
- dsi@a0351000 {
- panel {
- /*
- * NT35510-based Hydis HVA40WV1
- * Apparently some Kyle models can have a NT35512 fitted
- * here instead. In that case the boot loader needs to
- * modify this compatible.
- */
- compatible = "hydis,hva40wv1", "novatek,nt35510";
- reg = <0>;
- /* v_lcd_3v0 2.3-4.8V */
- vdd-supply = <&lcd_3v0_reg>;
- /* v_lcd_1v8 1.65-3.3V */
- vddi-supply = <&lcd_1v8_reg>;
- /* GPIO 139 */
- reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&display_default_mode>;
- backlight = <&ktd253>;
- };
- };
- };
- };
-};
-
-&pinctrl {
- /*
- * This extends the MC0_A_1 default config to include
- * the card detect GPIO217 line.
- */
- sdi0 {
- mc0_a_1_default {
- default_cfg1 {
- /* GPIO18, 19 & 20 unused so pull down */
- ste,config = <&gpio_in_pd>;
- };
- default_cfg4 {
- pins = "GPIO217_AH12"; /* card detect */
- ste,config = <&gpio_in_pd>;
- };
- };
- };
-
- mcde {
- dsi_default_mode: dsi_default {
- default_mux1 {
- /* Mux in VSI0 used for DSI TE */
- function = "lcd";
- groups = "lcdvsi0_a_1"; /* VSI0 for LCD */
- };
- default_cfg1 {
- pins = "GPIO68_E1"; /* VSI0 */
- ste,config = <&in_nopull>;
- };
- };
- };
-
- /* Two GPIO lines used by the display */
- display {
- display_default_mode: display_default {
- kyle_cfg1 {
- /*
- * OLED DETECT or check_pba, this appears to be high
- * on "PBA" which I guess is "prototype board A".
- */
- pins = "GPIO93_B7";
- ste,config = <&gpio_in_nopull>;
- };
- kyle_cfg2 {
- pins = "GPIO139_C9";
- /*
- * MIPI_DSI0_RESET_N resets the display, leave high
- * (de-asserted) so we only assert reset explicitly
- * from the display driver.
- */
- ste,config = <&gpio_out_hi>;
- };
- };
- };
-
- /* GPIO that enables the LDO regulator for the LCD display */
- lcd-ldo {
- lcd_pwr_en_default_mode: lcd_pwr_en_default {
- /* LCD_PWR_EN on GPIO219 */
- kyle_cfg1 {
- pins = "GPIO219_AG10";
- ste,config = <&gpio_out_hi>;
- };
- };
- };
-
- backlight {
- gpio_backlight_default_mode: backlight_default {
- kyle_cfg1 {
- pins = "GPIO69_E2"; /* LCD_BL_CTRL */
- ste,config = <&gpio_out_lo>;
- };
- };
- };
- flash {
- gpio_flash_default_mode: flash_default {
- kyle_cfg1 {
- pins = "GPIO140_B11", "GPIO141_C12";
- ste,config = <&gpio_out_lo>;
- };
- };
- };
- /* GPIO that enables the 2.9V SD card level translator */
- sd-level-translator {
- sd_level_translator_default: sd_level_translator_default {
- /* level shifter on GPIO87 */
- kyle_cfg1 {
- pins = "GPIO87_B3";
- ste,config = <&gpio_out_hi>;
- };
- };
- };
- /* GPIO that enables the LDO regulator for the eMMC */
- emmc-ldo {
- emmc_ldo_en_default_mode: emmc_ldo_default {
- /* LDO enable on GPIO223 */
- kyle_cfg1 {
- pins = "GPIO223_AH9";
- ste,config = <&gpio_out_hi>;
- };
- };
- };
- /* GPIO keys */
- gpio-keys {
- gpio_keys_default_mode: gpio_keys_default {
- kyle_cfg1 {
- pins = "GPIO67_G2", /* VOL UP */
- "GPIO91_B6", /* HOME */
- "GPIO92_D6"; /* VOL DOWN */
- ste,config = <&gpio_in_pu>;
- };
- };
- };
- /* Interrupt line for light/proximity sensor GP2AP002 */
- gp2ap002 {
- gp2ap002_kyle_default: gp2ap002_kyle {
- kyle_cfg1 {
- pins = "GPIO146_D13";
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
- /* GPIO-based I2C bus for NCP6914 */
- i2c-gpio-0 {
- i2c_gpio_0_default: i2c_gpio_0 {
- kyle_cfg1 {
- pins = "GPIO143_D12", "GPIO144_B13";
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
- /* GPIO-based I2C bus for ALPS HSCD compass */
- i2c-gpio-1 {
- i2c_gpio_1_default: i2c_gpio_1 {
- kyle_cfg1 {
- pins = "GPIO151_B17", "GPIO152_D16";
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
- wlan {
- wlan_default_mode: wlan_default {
- kyle_cfg1 {
- pins = "GPIO216_AG12";
- ste,config = <&gpio_in_pd>;
- };
- };
- wlan_en_default_mode: wlan_en_default {
- kyle_cfg2 {
- pins = "GPIO215_AH13";
- ste,config = <&gpio_out_lo>;
- };
- };
- };
- bluetooth {
- bluetooth_default_mode: bluetooth_default {
- kyle_cfg1 {
- pins = "GPIO199_AH23", "GPIO222_AJ9";
- ste,config = <&gpio_out_lo>;
- };
- kyle_cfg2 {
- pins = "GPIO97_D9";
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
- vibrator {
- vibrator_default: vibrator_default {
- kyle_cfg1 {
- pins = "GPIO195_AG28"; /* MOT_EN */
- ste,config = <&gpio_out_lo>;
- };
- };
- };
- /* Interrupt line for the Melfas MMS134S touchscreen */
- touchscreen {
- mms134s_kyle_default: mms134s_kyle {
- kyle_cfg1 {
- pins = "GPIO218_AH11";
- ste,config = <&gpio_in_nopull>;
- };
- };
- };
-};
-
-&ab8505_gpio {
- /* Hog a few default settings */
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_default>;
-
- gpio {
- gpio_default: gpio_default {
- kyle_mux {
- /* Change unused pins to GPIO mode */
- function = "gpio";
- groups = "gpio3_a_1", /* default: SysClkReq4 */
- "gpio14_a_1"; /* default: PWMOut1 */
- };
- kyle_cfg1 {
- pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
- bias-disable;
- };
- };
- };
-};