diff options
Diffstat (limited to 'dts/src/arm/ste-ux500-samsung-skomer.dts')
| -rw-r--r-- | dts/src/arm/ste-ux500-samsung-skomer.dts | 41 |
1 files changed, 38 insertions, 3 deletions
diff --git a/dts/src/arm/ste-ux500-samsung-skomer.dts b/dts/src/arm/ste-ux500-samsung-skomer.dts index b50634c81b..d28a00757d 100644 --- a/dts/src/arm/ste-ux500-samsung-skomer.dts +++ b/dts/src/arm/ste-ux500-samsung-skomer.dts @@ -8,6 +8,7 @@ #include "ste-ab8505.dtsi" #include "ste-dbx5x0-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -118,6 +119,32 @@ pinctrl-0 = <&gpio_backlight_default_mode>; }; + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + i2c-gpio-0 { compatible = "i2c-gpio"; sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -147,7 +174,7 @@ soc { // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -169,7 +196,7 @@ }; // WLAN SDIO channel - sdi1_per2@80118000 { + mmc@80118000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; bus-width = <4>; @@ -196,7 +223,7 @@ }; // eMMC - sdi2_per3@80005000 { + mmc@80005000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; @@ -487,6 +514,14 @@ }; }; }; + flash { + gpio_flash_default_mode: flash_default { + skomer_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; /* GPIO that enables the 2.9V SD card level translator */ sd-level-translator { sd_level_translator_default: sd_level_translator_default { |