diff options
Diffstat (limited to 'dts/src/arm/stm32429i-eval.dts')
-rw-r--r-- | dts/src/arm/stm32429i-eval.dts | 325 |
1 files changed, 0 insertions, 325 deletions
diff --git a/dts/src/arm/stm32429i-eval.dts b/dts/src/arm/stm32429i-eval.dts deleted file mode 100644 index c27fa355e5..0000000000 --- a/dts/src/arm/stm32429i-eval.dts +++ /dev/null @@ -1,325 +0,0 @@ -/* - * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "stm32f429.dtsi" -#include "stm32f429-pinctrl.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "STMicroelectronics STM32429i-EVAL board"; - compatible = "st,stm32429i-eval", "st,stm32f429"; - - chosen { - bootargs = "root=/dev/ram"; - stdout-path = "serial0:115200n8"; - }; - - memory@00000000 { - device_type = "memory"; - reg = <0x00000000 0x2000000>; - }; - - aliases { - serial0 = &usart1; - }; - - clocks { - clk_ext_camera: clk-ext-camera { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - }; - - soc { - dma-ranges = <0xc0000000 0x0 0x10000000>; - }; - - vdda: regulator-vdda { - compatible = "regulator-fixed"; - regulator-name = "vdda"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vref: regulator-vref { - compatible = "regulator-fixed"; - regulator-name = "vref"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_panel: vdd-panel { - compatible = "regulator-fixed"; - regulator-name = "vdd_panel"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - leds { - compatible = "gpio-leds"; - green { - gpios = <&gpiog 6 1>; - linux,default-trigger = "heartbeat"; - }; - orange { - gpios = <&gpiog 7 1>; - }; - red { - gpios = <&gpiog 10 1>; - }; - blue { - gpios = <&gpiog 12 1>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - button@0 { - label = "Wake up"; - linux,code = <KEY_WAKEUP>; - gpios = <&gpioa 0 0>; - }; - button@1 { - label = "Tamper"; - linux,code = <KEY_RESTART>; - gpios = <&gpioc 13 0>; - }; - }; - - usbotg_hs_phy: usbphy { - #phy-cells = <0>; - compatible = "usb-nop-xceiv"; - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>; - clock-names = "main_clk"; - }; - - panel_rgb: panel-rgb { - compatible = "ampire,am-480272h3tmqw-t01h"; - power-supply = <&vdd_panel>; - status = "okay"; - port { - panel_in_rgb: endpoint { - remote-endpoint = <<dc_out_rgb>; - }; - }; - }; - - mmc_vcard: mmc_vcard { - compatible = "regulator-fixed"; - regulator-name = "mmc_vcard"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&adc { - pinctrl-names = "default"; - pinctrl-0 = <&adc3_in8_pin>; - vdda-supply = <&vdda>; - vref-supply = <&vref>; - status = "okay"; - adc3: adc@200 { - st,adc-channels = <8>; - status = "okay"; - }; -}; - -&clk_hse { - clock-frequency = <25000000>; -}; - -&crc { - status = "okay"; -}; - -&dcmi { - status = "okay"; - - port { - dcmi_0: endpoint { - remote-endpoint = <&ov2640_0>; - bus-width = <8>; - hsync-active = <0>; - vsync-active = <0>; - pclk-sample = <1>; - }; - }; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; - - ov2640: camera@30 { - compatible = "ovti,ov2640"; - reg = <0x30>; - resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>; - pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>; - clocks = <&clk_ext_camera>; - clock-names = "xvclk"; - status = "okay"; - - port { - ov2640_0: endpoint { - remote-endpoint = <&dcmi_0>; - }; - }; - }; - - stmpe1600: stmpe1600@42 { - compatible = "st,stmpe1600"; - reg = <0x42>; - interrupts = <8 3>; - interrupt-parent = <&gpioi>; - interrupt-controller; - wakeup-source; - - stmpegpio: stmpe_gpio { - compatible = "st,stmpe-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - }; -}; - -&iwdg { - status = "okay"; - timeout-sec = <32>; -}; - -<dc { - status = "okay"; - pinctrl-0 = <<dc_pins>; - pinctrl-names = "default"; - - port { - ltdc_out_rgb: endpoint { - remote-endpoint = <&panel_in_rgb>; - }; - }; -}; - -&mac { - status = "okay"; - pinctrl-0 = <ðernet_mii>; - pinctrl-names = "default"; - phy-mode = "mii"; - phy-handle = <&phy1>; - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; -}; - -&rtc { - status = "okay"; -}; - -&sdio { - status = "okay"; - vmmc-supply = <&mmc_vcard>; - cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>; - pinctrl-names = "default", "opendrain"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_pins_od>; - bus-width = <4>; - max-frequency = <12500000>; -}; - -&timers1 { - status = "okay"; - - pwm { - pinctrl-0 = <&pwm1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - timer@0 { - status = "okay"; - }; -}; - -&timers3 { - status = "okay"; - - pwm { - pinctrl-0 = <&pwm3_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - timer@2 { - status = "okay"; - }; -}; - -&usart1 { - pinctrl-0 = <&usart1_pins_a>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usbotg_hs { - dr_mode = "host"; - phys = <&usbotg_hs_phy>; - phy-names = "usb2-phy"; - pinctrl-0 = <&usbotg_hs_pins_a>; - pinctrl-names = "default"; - status = "okay"; -}; |